Being a pre-autopilot Model S owner from early 2014, I’ve been living vicariously through the experiences of other Model S owners that have experienced the new Autopilot features.
That was until recently when I was able to finally land a Tesla Model S loaner that came equipped with the autopilot hardware. Here’s my review of the features.
Current Capabilities of Autopilot
- It can detect current speed limit and notify/indicate it on the speedometer.
- It has adaptive cruise control that adjusts to speed of cars in front
- It has overtake acceleration
- It has lane departure and blind spot warnings
- It has collision avoidance
- It has auto high beams which also come with the autopilot hardware.
I won’t be covering all of these in depth, but will touch on a few of these features.
What Autopilot Currently Lacks
The current version of autopilot does not steer the car on its own, yet. It will not automatically keep your car in lane and it will not swerve to avoid an obstacle, but it will, however, perform braking on its own. Automatic parking and automatic retrieval of the vehicle is also not yet available.
It’s safe to say that anything that requires the car to steer on its own is not yet available with the current software.
Another notable feature that was missing from the current version of Autopilot was the ability to track speed limits when cruise control was enabled. In other words, you can set a fixed cruising speed, but it will not automatically adjust to speed limit signs.
The system also does not automatically adjust the car to stop signs and traffic lights, so you very much need to be in control of the car at all times.
Testing Speed Assist
signs are then analyzed and compared against GPS data to determine the speed limit at your current driving location. For routes where no
signs are present, speed limits are determined using GPS data (if available). Instead of determining the speed limit based on signs and GPS data, you can also manually enter an
arbitrary speed limit.
I tested Speed Assist through several smaller backroads across town and found that it consistently reported the right speed limit. I noticed a slight delay before it picked up the speed limit changes, but it always took place within 10 seconds of detecting a new sign. Once you exceed the speed limit threshold, the blue analog speed indicator begins to turn white.
For me, I prefer a mode where the speed limit sign pops up on the speedometer once you exceed your threshold. The audible ding that comes with the Model S gets old, fast.
Lane Departure Warning
This feature emits a slight vibration and buzzing sound whenever you get too close to the traffic lines on roads. The vibration and noise is very slight and can be overlooked. I found the feature to be not that useful considering the car is not able to correct you back into lane, but that will soon change once the Auto-steering controls arrive in Firmware 7.0.
Blind Spot/Collision Avoidance
My only concern with Tesla’s collision avoidance system is any false alarms that may ensue because of heavy snow, fog, or even large insects that may come into contact with the sensors. I’m sure the system is intelligent enough to differentiate between a true collision versus adverse weather conditions and inanimate objects, but only time will tell how it works out in the long run.
I found the blind spot detection to be helpful and the indicators not that annoying. A little white indicator outside the speedometer will appear as cars enter the Model S blind spots.
Auto High Beams
Auto high beams on the Model S completely eliminates the need to think about it. It did as close to what I would have done, to the extent that I’d never have to think about high beams ever again. I loved it and wish I had it on my pre-Autopilot hardware-equipped Model S. Very cool.
I read the instructions and understand the concept, but the acceleration is so slight that I didn’t notice it actually overtaking a car. Maybe I didn’t test it right since I didn’t have much time to play with it.
Traffic Aware Cruise Control (TACC)
I spent the most time playing with the traffic aware cruise control (TACC) feature. First, I have to start by admitting that I’m a cruise control junkie — I use it all the time. On highways, back roads, etc. Basically, unless there’s a ton of traffic, I have cruise control on pretty much all the time. This helps me avoid speeding (far too easy in the Model S) and I love the way I can change cruise control speed on the Model S.
With TACC enabled, you pick a trailing distance between your car and the car in front of you by twisting the cruise control stalk. You have options from 1 to 7 with 7 being the furthest away from the car in front.
On back roads when cruising between 25mph and 50mph, having a setting of 7 resulted in a distance that was a bit far from the car in front, and I found that the reaction time of the TACC automatic braking was slower than I anticipated, resulting in heavy braking.
The software is behaving as if there’s a fixed distance between you and the car in front and thus aggressively slows down if the car in front aggressively slows, even if there’s a large buffer. This braking behavior had me not wanting to try it at settings below 7. The slow reaction time by the system is what set off the collision avoidance system that one time.
Even at a setting of 7 I had a few moments where I knew the system was going to stop but was afraid the guy behind me was going to plow into the rear of the car. This behavior needs to be refined.
The TACC system has a number of displays as follows:
The little hat on the speedometer is the currently set cruise control speed. The solid white or dashed line is what it thinks the current speed limit is — solid if its sure, dashed if its not sure or changing.
If a traffic stop is brief the system won’t go into hold mode and will immediately go back to following the car in front when it starts moving again (awesome for creeping traffic!). If the stop is longer, you need to tell it to resume the cruise by pressing the accelerator pedal, or by using the cruise resume function on the stalk.
I prefer the cruise resume function from the steering wheel as it prevents me from accidentally pressing the accelerator too hard. It didn’t feel natural to press the accelerator pedal when the car in front hasn’t moved yet. If you happen to resume cruise control too early, your car won’t move until the car in front of you begins to move.
Overall I really like the TACC feature, but it’s still a bit choppy for my tastes.
The new Autopilot features (Firmware 6.2) on my Model S loaner was very cool and generally worked well. The nature of the autopilot hardware makes it prohibitively expensive for Tesla to offer it as an upgrade. For me it was great to experience features that newer generations of the Model S come equipped with, but more importantly it gave me a glimpse into what the future holds for Autopilot. Meanwhile I’m still loving my Model S as-is – well, when I get it back from a drive unit replacement, but that’s a whole other story.