A SpaceX Falcon 9 rocket has successfully launched 51 upgraded laser-linked Starlink satellites from its Vandenberg Space Force Base (VSFB) – the first mission of its kind out of the company’s west coast launch facilities.
Known as Starlink Group 2-1, the mission debuted the operational design of new V1.5 Starlink satellites with laser interlinks that will eventually let the constellation route its own communications almost anywhere on Earth – regardless of ground station locations. Aside from potentially allowing SpaceX to flout local regulations in countries with oppressive communications restrictions, firewalls, or censors, those lasers will also give Starlink the ability to easily deliver internet to moving vehicles – including aircraft traveling over oceans – and in even the remotest locations with no ground infrastructure for hundreds of miles.
Independent of its main purpose, the Starlink 2-1 mission also saw SpaceX tie its internal Falcon booster reusability record. Following in the footsteps of younger booster B1051, Falcon 9 B1049, which debuted in September 2018, successfully completed its tenth orbital-class launch and landing with Starlink 2-1. Originally scheduled to launch as early as July, apparent hiccups mass-producing new Starlink V1.5 satellites and their laser interlinks delayed the mission by about two months, causing SpaceX to launch just once in 11 weeks preceding the mission.
In comparison, Falcon 9 B1051 debuted in March 2019 and became the first booster to cross the ten-flight mark in May 2021, just 26 months later. B1049 took almost exactly 36 months to accomplish the same feat – almost 40% slower but still faster than any of the four NASA Space Shuttles that successfully reached similar milestones.
SpaceX also says that Starlink 2-1 is the 24th time the company has successfully launched a flight-proven Falcon 9 payload fairing, reusing a normally expendable component that CEO Elon Musk once likened to a pallet of $6 million in cash. Ultimately, the company gave up on efforts to catch parasailing fairing halves out of the air with giant ship-based nets and has instead refocused on perfecting the reuse of fairings that gently land in the ocean. For the most part, that’s been accomplished by designing Starlink satellites themselves to tolerate a much dirtier, louder launch environment than most other spacecraft, letting SpaceX remove sponge-like foam sound suppression tiles normally found inside fairings and worry less about needing to deep-clean the giant nosecones.
Nevertheless, SpaceX has technically launched 150+ commercial payloads – and one major geostationary commsat (SXM-7) – over three launches with flight-proven fairings, suggesting that there is a path to wider commercial acceptance of the brand new technology and the direct cost savings it brings.
With Starlink 2-1 safely in orbit, SpaceX now likely operates more space-based laser interlinks than the rest of the world combined. Eventually, once enough satellites with laser links are in orbit, SpaceX will be able to dramatically expand Starlink coverage almost independent of the construction of new ground stations – a heavily bureaucratic process that has proven to make for agonizingly slow progress in a number of the 15+ countries with active service. Instead of requiring that the satellite a given user terminal (dish) is communicating with be in direct line of sight of a ground station dish to route a user’s communications, thus connecting them to the internet, a constellation with widespread lasers will allow a dish’s active satellite to relay that connection through other satellites.
As a result, ground stations can be significantly further away from the users they end up supporting. Further, given that SpaceX has no plans to stop building new ground stations despite the bureaucratic hell it can involve, a well-linked Starlink constellation will ultimately be able to beat most wired connections by using lasers to route user communications to the ground stations closest to the real-world servers or services they’re trying to access.
Stay tuned for updates on SpaceX’s next polar Starlink launch(es) with ‘space lasers.’
The Tesla Semi is entering a new Pilot Program with Paper Transport, LLC (PTI), a Wisconsin-based transportation provider. The company will test the Semi’s Long Range configuration through “dedicated operations within the Chicago market.”
Chicago presents an interesting challenge for the Semi, as it will be a colder-weather climate that will test the Semi’s ability to operate in lower temperatures and in potentially large accumulations of snow. This is something Tesla has been testing with the Semi in Alaska and even in Northern California during the colder months, but Chicago will present a truly tough midwestern winter.
Tesla Semi spotted on journey home after winter performance testing
PTI says it is using the Semi to evaluate its strategy of reducing transportation emissions while maintaining performance, reliability, and cost efficiency. These are major arguments for the Semi being introduced into new fleets.
CEO of PTI Tyler Ellison said:
“PTI has been a leader in sustainable transportation solutions for over 15 years. We take a consultative approach to helping customers identify and implement the right transportation solution for their network. Our partnership with Tesla expands our portfolio alongside renewable natural gas and intermodal, giving customers more ways to reduce Scope 3 emissions without compromising service or economics.”
PTI is far from the first company to adopt the Semi within a fleet, as Tesla entered strategic agreements with PepsiCo. and its subsidiary Frito-Lay for a Pilot Program that extended throughout the California region.
Tesla has let companies like those utilize the Semi to determine whether it would be suitable for their operations. Additionally, Tesla gets valuable information regarding the Semi’s performance, knowing what to improve and what is ideal for companies that will utilize the all-electric truck for regional and nationwide logistics.
PTI plans to utilize the Long Range configuration, which is priced at $290,000 and features a range of approximately 500 miles, a three-motor powertrain, up to 800 kW of drive power, and consumption of just 1.7 kWh per mile.
Tesla Semi pricing revealed after company uncovers trim levels
VP of Maintenance at PTI, Bryan Ellen, added:
“We are excited to partner with Tesla, leveraging their ever-evolving technology. We are bullish in our estimation of the parallels available between our dedicated model and the efficiency of their fully electric Class 8 tractor. We anticipate a growing synergy between our businesses as we work to facilitate this sustainable solution for our customers.”
PTI has logged more than 87 million miles using sources like compressed and renewable gas, but now is looking to take it a step further with fully electric operations.
Tesla revealed on Monday that it is building a new autonomous vehicle at Gigafactory Texas, its plant just outside of the City of Austin. This particular vehicle will be geared toward those who are in need of a wheelchair-accessible car that would require no human driver for operation.
According to a new report from Wired, Tesla’s Senior Policy Advisor, India Herdman, told members of the Washington D.C. City Council on Monday:
“We are in development for a purpose-built, wheelchair-accessible autonomous vehicle. We know that paratransit can be very difficult, and people who are confined to wheelchairs permanently should still be able to move around freely, so that is an active product being built by Tesla in Texas.”
This builds upon what CEO Elon Musk said last year on X, which confirmed the company was working on accessible rides within its Robotaxi platform, which currently is confined to the Model Y.
Absolutely
— Elon Musk (@elonmusk) September 19, 2025
Tesla is also developing the Cybercab, which started employee rides last week. However, this vehicle is not necessarily geared toward wheelchair accessibility.
That leaves a major gap in the autonomous ride-sharing program that Tesla is attempting to build; the company has been pretty clear that it does not want to complicate its manufacturing lines by bringing in a wide array of body styles.
However, it seems necessary to have something larger that could help transport people to appointments when they cannot drive. For wheelchair accessibility, the Robovan, which was unveiled at the “We, Robot” event in October 2024, seems to be the most ideal solution:
Herdman did not indicate whether she was referring to the Robovan or if Tesla is building yet another body style that is geared toward full autonomy but also caters to the handicapped.
Tesla might need to develop something specifically for the handicapped in order to align with the Americans with Disabilities Act, which prevents discrimination against people with disabilities in transportation services. Uber was hit with a lawsuit late last year for “refusing to reasonably modify its policies, practices, or procedures where necessary to avoid discriminating against riders with disabilities.”
Tesla would obviously like to avoid this.
It will be interesting to see what Tesla will do with this project, and whether it will introduce something new to the market or just continue with the Robovan.
Tesla weirdly confirmed that its steering wheel-less and pedal-less Cybercab vehicle is now in the process of giving employees rides, a huge milestone for the vehicle program.
But the entire thing was super strange. On Friday, Tesla released a video stating that there was “Cool news from Giga Texas” and that employees were now taking rides in Cybercabs that have no manual controls. The units seen on public roads are engineering vehicles that have manual controls inside, a necessity as Tesla moved through the testing phase.
However, Tesla removed the video and reposted it shortly after with a more vague title. It seems like the employee rides are still going, but the video was adjusted slightly. The initial upload showed employees doing things like watching movies and adjusting the climate, but these snippets were removed in the second upload.
Cool news from Giga Texas pic.twitter.com/gvbG456Tzw
— Tesla Robotaxi (@robotaxi) July 11, 2026
Both images below were uploaded with the first video, but were removed after Tesla re-uploaded the announcement. These are not available in the second upload
Credit: Tesla
Credit: Tesla
Nevertheless, the announcement from Tesla is that the Cybercab is operating with employees inside who can control the vehicle’s audio, video, climate, and destination settings through their smartphone app.
Tesla has already been testing Cybercab engineering units, but last month, it was able to self-certify for SAE Level 4, which would enable unsupervised self-driving in Texas. The company is moving toward that, and the plans have always been to launch Cybercab rides this year.
The Cybercab is potentially looked at as the next generation of Tesla’s mobility leg. For the past 15 years, the company has been known as somewhat of an automaker, among many other things. However, these passenger vehicles that Tesla has manufactured are now moving into a new realm, as they will eventually drive themselves with no supervision thanks to the Full Self-Driving suite.
The Cybercab is just the next step of that: a true vehicle developed for the sole purpose of ride-hailing. It has no human controls, it has only two seats, and it will get passengers from Point A to Point B with no awkward driver, no need for manual inputs, and with no stress.
Tesla is moving forward with other developments related to the Cybercab project as well. However, the big announcement will come when Tesla finally announces that it is launching Cybercab rides to the general public, something that it plans to launch either late this year or early 2027.
Tesla Semi enters new Pilot Program with interesting challenge
Tesla is building a wheelchair-accessible Robotaxi
