Connect with us

News

There are still ‘significant gaps to close’ in UAW negotiations: Ford

Credit: UAW

Published

on

Despite making some progress in contract negotiations with the United Auto Workers (UAW) union, Ford says there are still some major gaps to address before an agreement is reached. The statement comes after Ford avoided escalated strikes by meeting some UAW demands last week, just as parts workers walked out of 38 Stellantis and General Motors (GM) distribution centers on Friday.

Ford said on Sunday that there were still “significant gaps to close” in contract negotiations with the UAW, according to a report from Reuters. The UAW said it made “some real progress at Ford” over the weekend, although it added that the two parties still had serious issues to work through.

On Sunday evening, Ford said the related “issues are interconnected and must work within an overall agreement that supports our mutual success.”

At the time of writing, the UAW has not yet commented on the statement from Ford. The news also comes ahead of U.S. President Joe Biden’s plans to visit Michigan in support of the strikes on Tuesday.

Advertisement

Ford also said that it would be pausing construction on a $3.5 billion battery manufacturing plant in Michigan, as detailed in a Monday afternoon report from Reuters.

“We are pausing work and limiting spending on construction on the Marshall project until we’re confident about our ability to competitively operate the plant,” Ford said. “We haven’t made any final decision about the planned investment there.”

The Detroit automakers have offered contracts with 20-percent raises over the next four and a half years, though the UAW is reportedly still asking for 40-percent wage hikes over a four-year period, in addition to 32-hour work weeks. The union is also demanding the restoration of defined pension benefits and an end to a tiered wage system that requires a certain amount of time to reach top wages.

Workers at an additional 20 Stellantis and 18 GM parts distribution centers walked off the job on Friday due to a lack of progress in UAW contract negotiations. The walkouts are straining other Stellantis and GM manufacturing facilities, rendering them unable to receive the necessary parts to continue production. The expanded strikes totaled around 5,600 workers, joining the initial wave of 12,700 workers who walked out a week prior.

Advertisement

The UAW represents roughly 150,000 workers total, and this is the first time in history that the union has lodged strikes against all three of the Michigan automakers simultaneously.

Last week, GM said it was forced to lay off around 2,000 workers at a Fairfax, Kansas plant, citing a lack of available work due to the UAW strikes. The automaker went on to call the UAW demands “untenable,” adding that it wouldn’t be able to offer unemployment for the laid-off employees.

Advertisement

As the Detroit Free Press reports, one auto supplier in Wixom, Michigan also announced plans to lay off 230 workers on Monday. The figure represents 75 percent of employees at Eagle Industries, Inc., which makes a material used in car door components along with other non-automotive products. While the company hasn’t explicitly disclosed its clients, a separate analysis noted that its product had been used in Ford’s vehicles.

“As a result of unforeseen business circumstances, we are providing information in anticipation of a potential layoff at the worksite,” wrote the company in a note to the state of Michigan. “The estimated number of workers is subject to change due to evolving business circumstances.”

Some predict that the ongoing strikes will likely result in higher vehicle prices due to increased costs for parts. Another analysis from the University of Michigan noted that as many as 150,000 workers could be subject to layoffs if the strikes last an entire month, highlighting the situation’s far-reaching effects until the parties can finalize a deal.

“These growing spillover effects across the automotive supply chain produce successively larger spillovers to the broader economy, as well,” states the analysis, “as laid-off workers in the supply chain lose purchasing power and cut back on spending in other parts of the economy.”

Advertisement

Update: Updated to include the Monday afternoon report from Reuters, in which Ford said it was pausing construction on a Michigan battery plant.

Tesla’s ghost hangs over UAW’s ongoing strike

What are your thoughts? Let me know at zach@teslarati.com, find me on X at @zacharyvisconti, or send your tips to us at tips@teslarati.com.

Advertisement

Zach is a renewable energy reporter who has been covering electric vehicles since 2020. He grew up in Fremont, California, and he currently lives in Colorado. His work has appeared in the Chicago Tribune, KRON4 San Francisco, FOX31 Denver, InsideEVs, CleanTechnica, and many other publications. When he isn't covering Tesla or other EV companies, you can find him writing and performing music, drinking a good cup of coffee, or hanging out with his cats, Banks and Freddie. Reach out at zach@teslarati.com, find him on X at @zacharyvisconti, or send us tips at tips@teslarati.com.

Advertisement
Comments

DIY

Tesla owner fixes common feature complaint with crafty DIY retrofit

Published

on

Credit: @mikegapinski

Tesla owners have long griped about the wireless phone charger in the Model Y and other vehicles. It often turns smartphones into miniature ovens rather than reliably topping them up.

Software engineer and Model Y owner Michał Gapiński tackled this issue head-on with a clever DIY upgrade, swapping the cooled wireless charger pad from the China-made Model YL in for the one that came standard in his vehicle.

There are several key differences between the U.S.-built Model Y’s wireless charging pad and the one that Tesla has been installing in the Model YL. The one installed in U.S.-built vehicles lacks active cooling and relies on basic heat dissipation, leading to rapid temperature buildup during charging. In contrast, the Model YL integrates a small fan for active cooling.

This design maintains lower temperatures even in warm ambient conditions, though it does not support faster Qi2 charging on iPhones. The connector matches exactly, making physical swaps feasible on compatible consoles, but coding is required to enable full functionality.

Owners in the U.S. have complained about the wireless charging pad, with many reporting that overheating is fairly common. Within 20 or 30 minutes of placing a phone on the wireless charging pad, many have reported overheating messages on their phones, which halt charging and essentially turn the pad into a fancy place to rest your phone.

Many owners have opted to simply plug their phones into a charging cord. Tesla has acknowledged the problem by releasing several solutions for owners, including a relatively new feature that allows you to simply turn off the charging and simply act as a holder for your phone while driving.

Advertisement

Gapiński said that he sourced the cooled pad affordably from China, and it cost under $200 for the part.

He removed the existing console charger, swapped in the new unit, confirming a perfect connector fit, and handled the trim differences. Since the parameter isn’t fully secured, he enabled it through custom coding outside official Toolbox.

Advertisement

The fan activates quietly, blending with AC and seat cooling. He reported the installation was effective and the wireless charging pad worked perfectly; it even kept the phone cool as it stayed at just 86 degrees Fahrenheit. Many times, the wireless charging pad will bring the phone’s temperature well above 100 degrees, sometimes even being relatively hot to the touch.

Advertisement

This retrofit highlighted an elegant, owner-driven solution to a factory shortcoming. It is expected that Tesla will begin installing the cooled charging pads into new cars in the U.S. soon, and hopefully, it will offer some sort of retrofit service or kit to owners here who want to use the charging pad effectively.

For those who love to tinker, it’s an accessible upgrade, proving that innovation thrives beyond the production line.

Continue Reading

News

Tesla exec says Roadster unveil is soon — for real this time

Published

on

(Credit: teslaindiafansclub/Instagram)

The Tesla Roadster unveiling could be coming “in a few weeks,” according to the company’s Chief Designer Franz von Holzhausen, who said at the Tesla Takeover Europe Event in Austria that the all-electric hypercar could finally make its way to the production line after years of anticipation.

Von Holzhausen delivered the news just days after The Information reported that Tesla planned to push the Roadster unveiling to August. It was slated for both April and May of this year, but now it seems the company is leaning toward a late Summer event to cap off the heat with perhaps its most anticipated vehicle of all-time.

Franz has been with Tesla since 2008, and has played a pivotal role in the iconic design language the company has utilized with its vehicles. Speaking to the crowd in Austria virtually, von Holzhausen’s comments injected fresh excitement into a project that has been plagued by delays for nine years.

The second-generation Roadster promises to redefine supercar standards. Tesla’s website still highlights ambitious targets: 0-60 mph in under 1.9 seconds (with optional SpaceX thruster pack potentially achieving 1.1 seconds or less), a top speed exceeding 250 mph, and a range of about 620 miles.

Equipped with a tri-motor all-wheel-drive setup delivering over 1,000 horsepower, the four-seater aims to blend blistering acceleration, everyday usability, and innovative features like cold gas thrusters for short-hop capabilities, technology that will combine the project with SpaceX.

Advertisement

But years after the company promised to start production, which was slated for 2020, the timeline for the Roadster has continued to shift.

Tesla has strung along those who have put $50,000 deposits down, as well as fans and enthusiasts of the company who have been long awaiting the company to bring forth a car truly designed for the human driver, and not autonomy. The Roadster is more than just a halo vehicle for Tesla; it showcases the company’s ability to push the boundaries while incorporating synergies from other Musk companies.

However, it has to make it to production, which is something Musk and Co. have pushed back repeatedly.

As Tesla navigates Robotaxi development and broader autonomy goals, the Roadster serves as a reminder of its performance roots. If von Holzhausen’s timeline holds, fans could witness this engineering marvel by late June or early July 2026. Whether a full unveiling, demo, or initial deliveries, it marks a milestone for electric supercars.

Advertisement
Continue Reading

News

Tesla Roadster unveiling gets pushed again, but new event details emerge

Published

on

Credit: Dan Burkland

Tesla has reportedly pushed the unveiling of the Roadster once again, but there are also evidently new details about the event that the company plans to show off.

The Information reported this morning that Tesla will now unveil, for the second time, the next-generation Roadster in August, a further delay from the multiple timeline that the company had previously stated.

The report has not been confirmed or denied by Tesla at any capacity.

It also states the unveiling event will take place in Texas, the same place that Tesla executives revealed in May would be the place of manufacture for the company’s highly-anticipated supercar, which boasts a top speed of over 250 MPH and 650 miles of range, according to its website.

Advertisement

Tesla is also expected to showcase the SpaceX package, which will be used for faster acceleration and potentially hovering capabilities, at the unveiling event, the report states. Musk has always planned for this to happen, but now it seems it is more realistic than ever

The Roadster has had its unveiling date and manufacturing date pushed back on many occasions. It was set to start production in 2020, but the COVID-19 pandemic crippled supply chain operations, forcing Tesla to push its timeline back considerably.

Advertisement

However, COVID has been over for some time, and Tesla has still not managed to successfully schedule and execute an unveiling event, which is something fans and enthusiasts, as well as those who have put down a $50,000 deposit, have been waiting for.

The vehicle was close to completion last year, but Musk truly wanted Lars Moravy and Franz von Holzhausen to push the limits of the Roadster. In July of last year, Moravy said:

“Roadster is definitely in development. We did talk about it last Sunday night. We are gearing up for a super cool demo. It’s going to be mind-blowing; We showed Elon some cool demos last week of the tech we’ve been working on, and he got a little excited.”

It is important to note two things: Tesla has not confirmed these details, and the company has regularly pushed these dates back. Until Tesla sends out formal invitations with a concrete date, taking any unveiling event reports with a grain of salt is a good idea.

Advertisement
Continue Reading