Connect with us

Elon Musk

Tesla showcases Optimus humanoid robot at AWE 2026 in Shanghai

Tesla’s humanoid robot was presented as part of the company’s exhibit at the Shanghai electronics show.

Published

on

Credit: Tesla/YouTube

Tesla showcased its Optimus humanoid robot at the 2026 Appliance & Electronics World Expo (AWE 2026) in Shanghai. The event opened Thursday and featured several Tesla products, including the company’s humanoid robot and the Cybertruck.

The display was reported by CNEV Post, citing information from local media outlet Cailian and on-site staff at the exhibition.

Tesla’s humanoid robot was presented as part of the company’s exhibit at the Shanghai electronics show. On-site staff reportedly stated that mass production of the robot could begin by the end of 2026.

Tesla previously indicated that it plans to manufacture its humanoid robots at scale once production begins, with its initial production line in the Fremont Factory reaching up to 1 million units annually. An Optimus production line at Gigafactory Texas is expected to produce 10 million units per year. 

Advertisement

Tesla China previously shared a teaser image on Weibo showing a pair of highly detailed robotic hands believed to belong to Optimus. The image suggests a design with finger proportions and structures that closely resemble those of a human hand.

Robotic hands are widely considered one of the most difficult engineering challenges in humanoid robotics. For a system like Optimus to perform complex real-world tasks, from factory work to household activities, the robot would require highly advanced dexterity.

Elon Musk has previously stated that Optimus has the capability to eventually become the first real-world example of a Von Neumann machine, a self-replicating system capable of building copies of itself, even on other planets. “Optimus will be the first Von Neumann machine, capable of building civilization by itself on any viable planet,” Musk wrote in a post on X.

Advertisement

Simon is an experienced automotive reporter with a passion for electric cars and clean energy. Fascinated by the world envisioned by Elon Musk, he hopes to make it to Mars (at least as a tourist) someday. For stories or tips--or even to just say a simple hello--send a message to his email, simon@teslarati.com or his handle on X, @ResidentSponge.

Advertisement
Comments

Elon Musk

Elon Musk shares big Tesla Optimus 3 production update

According to Musk, Tesla is in the final stages of completing Optimus 3, which he described as one of the world’s most advanced humanoid robots.

Published

on

Credit: Tesla China

Tesla CEO Elon Musk has stated that production of Optimus 3 could begin this summer. Musk shared the update in his interview at the Abundance Summit.

According to Musk, Tesla is in the final stages of completing Optimus 3, which he described as one of the world’s most advanced humanoid robots.

“We’re in the final stages of completion of Optimus 3, which is really going to be by far the most advanced robot in the world. Nothing’s even close. In fact, I haven’t even seen demos of robots that are as good as Optimus 3,” Musk said.

He also set expectations on the pace of Optimus 3’s production ramp, stating that the initial volumes of the humanoid robot will likely be very low. Musk did, however, also state that high production rates for Optimus 3 should be possible in 2027. 

Advertisement

“I think we’ll start production on Optimus 3 this summer, but very slow at first, like sort of this classic S-curve ramp of manufacturing units versus time. And then, probably reach high volume production around summer next year,” he said.

Interestingly enough, the CEO hinted that Tesla is looking to iterate on the robot quickly, potentially releasing a new Optimus design every year.

“We’ll have Optimus 4 design complete next year. We’ll try to release a new robot design every year,” Musk stated.

Tesla has already outlined broader plans for scaling Optimus production beyond its first manufacturing line. Musk previously stated that Optimus 4 will be built at Gigafactory Texas at significantly higher production volumes.

Advertisement

Initial production lines for the robot are expected to be located at Tesla’s Fremont Factory, where the company plans to establish a line capable of producing up to 1 million robots per year.

A larger production ramp is expected to occur at Gigafactory Texas, where Musk has previously suggested could eventually support production of up to 10 million robots per year.

“We’re going to launch on the fastest production ramp of any product of any large complex manufactured product ever, starting with building a one-million-unit production line in Fremont. And that’s Line one. And then a ten million unit per year production line here,” Musk said previously.

The comments suggest that while Optimus 3 will likely begin production at Fremont, Tesla’s larger-scale manufacturing push could arrive with Optimus 4 at Gigafactory Texas.

Advertisement
Continue Reading

Elon Musk

Tesla Cybercab production line is targeting hundreds of vehicles weekly: report

According to the report, Tesla has been adding staff and installing new equipment at its Austin factory as it prepares to begin Cybercab production. 

Published

on

Credit: Tesla/X

Tesla is reportedly designing its Cybercab production line to manufacture hundreds of the autonomous vehicles each week once mass production begins. The effort is underway at Gigafactory Texas in Austin as the company prepares to start building the Robotaxi at scale.

The details were reported by The Wall Street Journal, citing people reportedly familiar with the matter.

According to the report, Tesla has been adding staff and installing new equipment at its Austin factory as it prepares to begin Cybercab production. 

People reportedly familiar with Tesla’s plans stated that the company has been growing its staff and bringing in new equipment to start the mass production of the Cybercab this April.

Advertisement

The Cybercab is Tesla’s upcoming fully autonomous two-seat vehicle designed without a steering wheel or pedals. The vehicle is intended to operate primarily as part of Tesla’s planned Robotaxi ride-hailing network. 

“There’s no fallback mechanism here. Like this car either drives itself or it does not drive,” Musk stated during Tesla’s previous earnings call.

Tesla has indicated that Cybercab production could begin as soon as April, though Elon Musk has noted that early production will likely be slow before ramping over time. Musk has stated that the Cybercab’s slow ramp is due in no small part to the fact that it is a completely new vehicle platform

Tesla’s Cybercab is designed to work with the company’s Full Self-Driving (FSD) system and support its planned autonomous ride-hailing service. The company has suggested that the vehicle could cost under $30,000, making it one of Tesla’s most affordable models if produced at scale. Musk has confirmed in a previous X post that the vehicle will indeed be offered to regular consumers at a price below $30,000. 

Advertisement

Musk has previously stated that Tesla could eventually produce millions of Cybercabs annually if demand and production capacity scale as planned.

Continue Reading

Elon Musk

Tesla and xAI team up on massive new project

It is the latest move by a Musk company to automate, streamline, and reduce the manual, monotonous, and tedious work currently performed by humans through AI and robotics development. Digital Optimus will be capable of processing and actioning the past five seconds of a real-time computer screen video and keyboard and mouse actions.

Published

on

Credit: Grok

Elon Musk teased a massive new project, to be developed jointly by Tesla and xAI, called “Digital Optimus” or “Macrohard,” the first development under Tesla’s investment agreement with xAI.

Musk announced on X that Digital Optimus will “be capable of emulating the function of entire companies.”

It is the latest move by a Musk company to automate, streamline, and reduce the manual, monotonous, and tedious work currently performed by humans through AI and robotics development. Digital Optimus will be capable of processing and actioning the past five seconds of a real-time computer screen video and keyboard and mouse actions.

Essentially, it will be an AI version of a desk worker in many capacities, including accounting, HR tasks, and others.

Musk said:

“Grok is the master conductor/navigator with deep understanding of the world to direct digital Optimus, which is processing and actioning the past 5 secs of real-time computer screen video and keyboard/mouse actions. Grok is like a much more advanced and sophisticated version of turn-by-turn navigation software. You can think of it as Digital Optimus AI being System 1 (instinctive part of the mind) and Grok being System 2. (thinking part of the mind).”

Its key applications would be used for enterprise automation, simulating entire companies, high-volume repetitive tasks, and potentially, future hybrid use with the Optimus robot, which would handle physical tasks, while Digital Optimus would handle the clerical work.

Tesla announces massive investment into xAI

The creation of a digital AI suite like Digital Optimus would help companies save time and money, as well as become more efficient in their operations through massive scalability. However, there will undoubtedly be concerns from people who are skeptical of a fully-integrated AI workhorse like this one.

From an energy consumption perspective and just a general concern for the human workforce, these types of AI projects are polarizing in nature.

However, Digital Optimus would be a great digital counterpart to Tesla’s physical Optimus robot, as it would be a hyper-efficient addition to any company that is looking for more production for less cost.

Musk maintains that there is no other company on Earth that will be able to do this.

Continue Reading