Connect with us
smart summon navigates roundabout smart summon navigates roundabout

News

Tesla Model 3 navigates roundabout on its own using Smart Summon

Published

on

Roundabouts aren’t always the easiest to navigate for human drivers, but one Tesla Model 3 was able to successfully go through one using its Smart Summon feature.

The host of YouTube channel All Electric wanted to see how his Model 3 would perform at navigating a roundabout using only Smart Summon. His Model 3, which had Tesla’s 2019.40.50.7 update installed, was able to make its way around the circular junction with minimum hiccups.

As the All Electric host pointed out, his Model 3 was able to enter the roundabout smoothly, while going at 5 mph and slowing down in some parts of the maneuver, before carefully exiting to reach its intended target location.

Tesla’s Smart Summon is a feature that allows users to remotely operate their Tesla from a parking spot to a designated location using their vehicles’ Full Self-Driving suite. The feature still requires users to be within 200 feet of their car, and uses the vehicles’ system of cameras, radar, and ultrasonic sensors to get around obstacles. Smart Summon is a step closer to Tesla CEO Elon Musk’s vision of deploying a fleet of autonomous vehicles.

Advertisement
-

Smart Summon has received plenty of improvements since it was released in September last year as part of the V10 update. The feature has also been put to the test many times, most recently proving that it can drive through a torrential downpour to rescue a family, navigate an intense obstacle course, and take its owner through a drive-thru restaurant.

With full backing from regulatory bodies, Tesla will likely be able to remove the 200-feet restriction on Smart Summon and allow users to call their cars from greater distances. CEO Elon Musk once even mentioned using Summon to call vehicles from across the country. Ultimately, Smart Summon may be a small feature for now, but it will play a central role in the deployment of self-driving Robotaxis.

Musk revealed further details for his vision of an autonomous ride-sharing program during Tesla’s Autonomy Day last year. Musk said he hoped to get the Tesla Network’s Robotaxi service running by 2020.

Watch All Electric‘s latest Smart Summon test in the video below.

Advertisement
-

I write about science and technology that changes the world.

Advertisement
Comments

News

Tesla Cybercab fleet grows in Austin ahead of launch event

Published

on

Credit: Teslarati

UPDATE: The number has now been updated to 45 units, up from 7!

Tesla is bolstering its Cybercab fleet with the State of Texas’s regulatory bodies ahead of the planned launch of the all-electric ride-hailing vehicle this Thursday.

Seven purpose-built Tesla Cybercabs have been added to Texas’s official automated vehicle registry, appearing in the Texas Motor Carrier Credentialing System (TxMCCS) public lookup just three days before Tesla’s invite-only Cybercab launch event in Austin on September 3.

Advertisement
-

The records, visible through TxDMV’s Motor Carrier and Automated Motor Vehicle Operator Lookup, list seven 2026 Tesla Cybercabs under Tesla Robotaxi, LLC. Their VINs begin with the 5YJA prefix, distinct from the 7SAYG Model Y robotaxis that already dominate Tesla’s Texas fleet.

Community trackers that scrape the same public database recorded the new entries on August 31, bringing Tesla’s authorized Texas robotaxi total to 276 vehicles: 269 Model Ys and the seven Cybercabs:

Texas Senate Bill 2807, which took effect in late May 2026, created a self-certification framework for commercial Level 4 operations. Operators file through TxMCCS, attest to SAE Level 4 capability, maintain insurance, and keep an active vehicle list.

Advertisement
-

Tesla completed that process months earlier for its existing Model Y Robotaxi service, which has carried paying passengers in Austin, Dallas, Houston and other markets. Adding the Cybercabs to the same authorization means the new two-seat, steering-wheel-free vehicles are now legally recognized for commercial use on Texas roads.

The timing is deliberate as Tesla scheduled the September 3 event at its Austin campus after sending invitations to selected Robotaxi riders and other guests. The company has described the evening as a chance to “experience the future of full autonomy” and plans to livestream it.

Production Cybercabs, which lack pedals and a steering wheel, have been rolling off the Giga Texas line for months; some earlier examples still carried temporary driver controls for data collection. Registering a small fleet of the finished design immediately before the public event signals that Tesla intends to move the purpose-built vehicle from factory and test tracks into the same Robotaxi app already used by Model Y passengers.

The seven units remain a tiny fraction of Tesla’s overall Texas authorization and far smaller than competing fleets. Registration does not automatically equal unsupervised public rides; it is the legal prerequisite.

Still, the sudden appearance of Cybercab VINs in the state’s lookup system, after a year of Model Y-only listings, is the clearest official confirmation yet that Tesla’s dedicated robotaxi hardware is entering the regulatory pipeline at the same moment the company is preparing to show it to invited guests and a global livestream audience.

Whether those seven vehicles appear at the September 3 event or begin carrying passengers shortly afterward, their presence in TxMCCS marks a concrete regulatory step that has been anticipated since the Cybercab concept was first revealed.

Advertisement
-
Continue Reading

News

Tesla expands driverless Robotaxi geofence in Austin

Published

on

Credit: @JoeTegtmeyer/X

Tesla has expanded the operational geofence for its driverless Robotaxi service in Austin, Texas, marking the first such increase in some time. The updated Service Area for Robotaxi in Austin now spans about 288 square miles and is roughly 9 percent larger than the previous boundary.

This incremental growth adds approximately 24 square miles of coverage, bringing the prior zone of roughly 264 square miles into a broader footprint that better serves northern suburbs.

The expansion extends the geofence northward toward Pflugerville along the US 183 corridor, incorporating additional neighborhoods north of the Domain and areas such as Mesa Park. These additions include higher-end residential and commercial districts that previously sat just outside the allowed operating zone.

Riders can now request unsupervised trips that begin or end in these newly included locations, provided the entire route remains inside the digital boundary:

Tesla first launched public Robotaxi operations in Austin in mid-2025 with a modest initial zone of about 20 square miles. Subsequent enlargements in 2025 and early 2026 steadily grew the map until it covered much of the metropolitan area.

After the last major update roughly ten months earlier, the company held the boundary steady while it collected additional miles and refined the FSD suite.

The modest nine percent increase still matters for daily utility. Longer trips become possible, more residents gain access, and the fleet can accumulate more diverse real-world data across new road types and traffic patterns. Observers note that the added territory aligns with existing Tesla service infrastructure, which could support more efficient vehicle staging in the North end of Austin.

Although the geofence has grown, Tesla continues to operate a relatively small unsupervised fleet in the city. The company has emphasized safety and software readiness over rapid geographic scaling. This latest map update signals that Tesla remains committed to expanding Robotaxi availability in its home market as it prepares for further software improvements and potential Cybercab deployments.

The 288-square-mile zone now gives Austin riders one of the larger driverless service areas currently available in the United States.

Advertisement
-
Continue Reading

Elon Musk

Elon Musk’s Grok can basically control anything in your Tesla now

Published

on

Credit: Tesla

Tesla’s 2026 Summer Update turns Grok from a talking companion into a true in-car controller, with considerably expanded capabilities. Where the assistant once answered questions and handled navigation, it can now operate hardware and software through ordinary speech, including several requests at the same time.

Grok has become incredibly robust over the past few quarters, and this new ability that Tesla has included with its Summer Update is perhaps the clearest sign of just how capable it has become.

You can issue many commands to Grok at once, and each will be taken care of: anything from headlight control to climate adjustments to mirror folding can now all be taken care of with a simple sentence spoken toward Grok:

Here’s another example I used in my Model Y:

Tesla’s official Release Notes list the core powers of Grok’s new capabilities: Grok can place phone calls from a paired phone, search a streaming service and queue music, adjust climate, and search the Controls panel. Drivers can also ask it questions about the vehicle or the latest features included in a recent software update.

It can also take care of driving settings, dynamics, and other relevant preferences that deal with how the car operates and handles.

Advertisement
-

Tesla Summer Update begins rolling out: a look at the new features

It’s also more of a use case than a novelty feature. Grok was great for learning about something that was being pondered while Full Self-Driving was taking care of the major automotive responsibilities, but it did have some useful functionality when it came to navigation.

Another less-noted improvement is the swift transition that Grok has from thinking of its answer to giving you one. In the past, it would take a few seconds for Grok to truly come up with a valuable response. It now seems that it is improving, at least slightly.

Continue Reading