News
SpaceX Falcon Heavy booster tips over on drone ship, returns to port in pieces
SpaceX’s first Falcon Heavy Block 5 center core (i.e. booster) has completed a bittersweet return to shore aboard drone ship Of Course I Still Love You after apparently breaking in half during a wave-induced tumble.
Local maritime and spaceflight fans Julia Bergeron and Stephen Marr were first to document the condition of the SpaceX rocket as it passed through the mouth of Port Canaveral. Although the lighting conditions were far from optimal, photos indicate that the Block 5 center core suffered a near-surgical removal of everything above its kerosene (RP-1) propellant tank. In other words, the liquid oxygen (LOx) tank and interstage are nowhere to be found, while Falcon Heavy B1055’s octaweb, nine Merlin 1D engines, landing legs, and maimed RP-1 tank are all safely resting on OCISLY’s deck.
The port arrival of B1055’s severed aft section is not exactly the happiest ending to the story of Falcon Heavy Flight 2 but the booster’s demise will reportedly have no impact on SpaceX’s 2019 launch manifest. That includes Flight 3 of Falcon Heavy, scheduled to launch with both of Falcon Heavy’s flight-proven side boosters as early as late June. Thankfully, SpaceX has built a second brand new Falcon Heavy center core for the critical US Air Force mission, known as STP-2.
Likely to be booster B1057, that fresh center core should have no difficulty supporting Falcon Heavy’s third launch, although SpaceX will probably ensure that the drone ship’s robotic recovery robot is Falcon Heavy-compatible this time around.
According to SpaceX CEO Elon Musk, the cause of this incident is easily traced back to a combination of bad luck and the simple fact that OCISLY’s Octagrabber had yet to be outfitted for Falcon Heavy center cores. It’s unclear what prevents Octagrabber from interfacing with the custom boosters, but it likely involves the bulky mechanisms they use to transfer the thrust of both side boosters and safely push them away during booster separation. Those mechanisms – a combination of matte black polygons and cylinders and clockwork-like blocks – are easily visible in the photo above.
Some minor subassemblies can probably be salvaged from the badly damaged aft section of B1055 but the booster’s nine Merlin 1D engines are likely the only major recoverable hardware. Even then, it appears that the nozzles of at least two of those Merlin 1Ds were damaged by B1055’s tumble.
The successful recovery of B1055’s engine section should still give SpaceX’s recovery and refurbishment engineers their first hands-on post-flight analysis of a center core’s complex connection and separation mechanisms. Having suffered through an exceptionally hot and fast reentry, the condition of those mechanisms and the booster’s octaweb heat shield will hopefully be able to offer valuable insight into their performance at the edge of Falcon’s survivable flight envelope.
Check out Teslarati’s Marketplace! We offer Tesla accessories, including for the Tesla Cybertruck and Tesla Model 3.
Investor's Corner
Elon Musk drops a Thanksgiving hint about Starship’s biggest test yet
Elon Musk says Starship Flight 15 will try to catch the ship itself, a first.
Elon Musk says SpaceX’s next Starship flight will try something nobody has done before, by catching the ship itself. Speaking to roughly 2,000 people at the X Takeover event at Giga Texas on Saturday, Musk said Flight 15 is about four to six weeks away and “probably launches a little bit before Thanksgiving, is my guess.”
That is a slip from earlier reporting, which had pointed to a launch as early as October 19. Musk explained why the date keeps moving. “We’re making a bunch of improvements to the rocket between every flight,” he said, adding that there are often hundreds, sometimes thousands, of small changes. This time the list is short, “but some of them take a fair bit of work and we’ve got to go inside the tank to make some of these changes.”
“We’re going to try to catch the ship, which is a super big deal,” Musk said. “If we do so, that’ll be the first time that there’s been full recovery of an orbital class rocket.” SpaceX has already caught the Super Heavy booster with the tower’s mechanical arms, and has talked about catching the ship since late 2025, but the upper stage has never been caught.
Musk also laid out what comes after. “The next big milestone would be to refly both the booster and the ship,” he said, describing a Flight 16 where “all parts of an orbital rocket are reflown.”
The reason SpaceX wants this comes down to cost and cadence. Every Starship ship so far has ended its flight in the ocean, and SpaceX expects most of those water landings to end in fireballs. A ship that returns to Starbase intact can be inspected and flown again. SpaceX’s IPO filing, says Starship V3 is designed to deliver 100 metric tons to orbit in a fully reusable configuration, that SpaceX aims to cut the cost to reach orbit by 99% or more versus the historical average, and that tower catches should allow “multiple launches per day.”
The payoff goes beyond cheaper launches. The next generation Starlink V3 satellites are too large for Falcon 9 and can only fly on Starship, which can carry up to 60 per flight. Flight 14 on September 28 deployed the first 26 of them after Starship reached orbit despite an early engine shutdown, as Teslarati reported. Musk blamed engine computer software, and said the heat shield “was extremely robust,” which he claimed in August had solved Starship’s biggest challenge.
NASA’s Moon plans depend on the same capability. NASA’s inspector general has described a lander mission that needs a propellant depot in low Earth orbit and more than 10 tanker flights, with SpaceX targeting one tanker launch every six days. That schedule only works if ships and boosters come back fast and fly again. Also, ship to ship propellant transfer has not been attempted yet.
One interesting hurdle yet to be explored is bringing the ship back to the launch site, with reentry over land, which will undoubtedly come with a lot of aviation safety reviews.
Lifestyle
Tesla’s mirrorless Cybercab will give riders a visibility upgrade
Tesla engineer confirms Cybercab update letting riders pull up rear and repeater cameras on demand.
Tesla is working on a Cybercab update that would let passengers pull up the vehicle’s rear and side cameras on demand, and the request came straight from a rider.
The exchange played out on X late Friday. Cybercab rider Dan Burkland shared photos of the two-seater’s cabin screen after an evening ride, praised the UI team’s work, and left one request: let riders open the rear and repeater cameras whenever they want, “especially for peace of mind.” Tesla UI software engineer Evan (@CarCoder) answered with two words: “In development.”
The Tesla UI team absolutely crushed it with the infotainment software. Nicely done @CarCoder!
One feature request: Allow folks to pull up the rear & repeater cameras on demand. This would be great especially for peace of mind. https://t.co/mNAOSLx6pE
— Dan Burkland (@DBurkland) October 10, 2026
The idea fits a pattern Teslarati has tracked since public rides began. Days after paid Cybercab service opened in Austin, Tesla sent riders a survey that asked them to rate the touchscreen, the app and the cabin, and to pick the features they wanted most. We reported on that survey in September, and a camera view is the kind of small software change Tesla can push quickly if riders keep asking.
It also speaks to something unique about the vehicle. With no steering wheel, no pedals and no driver, passengers have no mirror to check and no way to see behind them. The hardware is clearly built for camera awareness, from the repeater cameras to the rear camera. Letting a passenger look through those same cameras would give a nervous first time rider a way to confirm what is around the car.
The timing matters because the fleet is growing fast. Tesla’s Robotaxi account said on Saturday that more than 300 Cybercabs are now serving Austin, an eightfold increase in 30 days, and Tesla AI chief Ashok Elluswamy named Dallas as the next city. More cars and more cities mean more people riding in a driverless vehicle for the first time, which is exactly when small trust features carry weight.
For now, the feature is confirmed only as in development. If Tesla follows its usual pattern with Cybercab software, riders could see it appear in a point release without any announcement, and Teslarati will watch for it.
News
Tesla’s Cybercab fleet jumped 8x in a month, with Dallas up next
Tesla confirms its first official Cybercab fleet number as Austin scales fast and Dallas looms.
Tesla says more than 300 Cybercabs are now serving Austin, the first time the company has put an official number on its active Cybercab fleet. The figure came from the Robotaxi account on X on Saturday, which wrote that one month after launch the service had “scaled to 300+ Cybercabs serving Austin – an 8x increase in 30 days.”
Ashok Elluswamy, Tesla’s head of AI software, quoted the post with a line that carried the bigger news. “Two years since the 10/10 Cybercab WeRobot event, the cabs are everywhere in Austin now. Dallas soon,” he wrote. It is the first time Tesla has named the next city for public Cybercab rides.
One month after launch, we’ve scaled to 300+ Cybercabs serving Austin – an 8x increase in 30 days https://t.co/EagJy2JAsm
— Robotaxi (@robotaxi) October 10, 2026
Tesla opened Cybercab rides to the public in Austin on September 4, as Teslarati reported, a day after an invite only launch event. The ramp since then has been steep. Our September 28 report had the fleet at well over 100 units after availability jumped from 58 to 125 in a single week. On Thursday, Tesla added 150 Cybercabs to the Texas automated vehicle registry, lifting its registered count to 319 from 169. The first seven appeared on the registry on August 31.
RobotaxiTracker, a community site that counts vehicles from sightings and state records, listed 275 vehicles in unsupervised service in Austin on Saturday, 105 of them Cybercabs, which is well below Tesla’s figure. Tracker counts can lag official numbers, though Sawyer Merritt noted that Cybercab wait times in Austin stayed short on Saturday evening even with more than 2,000 fans in town for X Takeover.
Regulators are watching the rollout. NHTSA opened an audit query into Tesla’s certification that the Cybercab meets federal safety standards, and sworn answers are due October 30. Tesla reports third quarter earnings on October 21, which gives the company a natural venue to define its fleet numbers and put a date on Dallas.
Elon Musk drops a Thanksgiving hint about Starship’s biggest test yet
Tesla’s mirrorless Cybercab will give riders a visibility upgrade
Tesla’s Cybercab fleet jumped 8x in a month, with Dallas up next
The Pentagon taps Elon Musk to design the battlefield of the future
Tesla Roadster’s new patent preps white-knuckle speeds, keeping it grounded
