News
SpaceX files Starship flight debut paperwork, preps for launch pad upgrades
On September 9th, the first signs of SpaceX planning for Starship Mk1’s South Texas launch debut appeared in the form of FCC applications, requesting permission to communicate with the rocket prototype during its first flight.
Simultaneously, word broke on September 5th – via a Business Insider report – that SpaceX is effectively set to receive FAA permission to upgrade its South Texas launch facilities for Starship. All things considered, it appears that most – if not all – the stars have begun to align for SpaceX’s inaugural Starship launch, said by CEO Elon Musk to be scheduled for no earlier than October 2019.
The application confirms several details about Starship Mk1’s debut, revealing that SpaceX will kick off the test campaign with a running jump from Starhopper’s 150m (500 ft) flight-test hand-off. The company is targeting an altitude of ~20 km (12.5 mi) – more than two magnitudes higher than its predecessor’s peak – and plans to land the spacecraft just a hundred or so feet from its launch site, on the same landing pad used by Starhopper.
SpaceX teams continue to work around the clock to ready Starship Mk1 for its ambitious flight debut. A new ring segment was stacked on top of the vehicle’s tank section several days ago, while locals also spotted the delivery of one or two new legs/fins, built out of riveted steel. SpaceX’s Boca Chica team continues to struggle to attach Starship’s tip to the rest of its curved nose section, having recently separated the segments for the first time in months.
Preliminary welding of Starship Mk1’s upper (and final) tank dome appears to be complete and technicians are working to integrate the spacecraft’s internal hardware before it can be installed. Meanwhile, a range of new concrete pads have been set and are being outfitted with additional production hardware, likely paving the way for simultaneously Starship-Starship or Starship-Super Heavy builds in the near future.
Documents acquired and published on September 5th by Business Insider reporter Dave Mosher touched on the assembly facility’s expansion and provided an excellent overview of SpaceX’s planned upgrades to its Starship launch pad. Retasked from original plans (and approvals) for an additional Falcon 9/Falcon Heavy launch site, the documents confirmed that the FAA has reevaluated its 2014 Environmental Impact Statement (EIS) and is effectively ready to re-permit SpaceX’s Boca Chica facilities in light of its new purpose.
About as classically SpaceX as it gets, the company has already dramatically altered plans and timelines since the FAA even began to reevaluate its launch pad EIS. Discussed as Phases 1-3, SpaceX – barely two months after the FAA’s updated EIS statement – appears to have already completed Phases 1 and 2 (wet dress rehearsals, static fires, and small hops) and doesn’t have public plans for “medium hops” of “30 cm…up to 3 km”. The FAA statement – signed in May 2019 – says that the agency did not have the information necessary to permit Phase 3, involving “engine ignition and thrust to lift the Starship to 100 km, flip the Starship at high altitude, and conduct a reentry and landing.“
This article’s feature photo shows SpaceX’s late-2018/early-2019 imagining of launch site upgrades reportedly needed to support Phase 2 testing. Although extremely similar to what SpaceX has already built in South Texas, some significant changes are definitely present, and it looks like SpaceX has a busy 4-8 weeks of work ahead to complete necessary modifications, including expanded propellant storage, two large walls, and possible underground routing of critical infrastructure.
Ultimately, significant work remains for SpaceX to receive both FAA’s EIS go-ahead and experimental launch permits for Starship Mk1’s first flight. Based on the ~3 weeks it took the FAA to simply extend Starhopper’s existing 25m hop permit to 200m (eventually cut to 150m), it could be quite the uphill battle to jump to a 20 km flight test. For the time being, SpaceX hopes to conduct Starship’s 20-km flight debut as early as October 13th, in line with Musk’s ambitious “October” target.
Check out Teslarati’s Marketplace! We offer Tesla accessories, including for the Tesla Cybertruck and Tesla Model 3.
Tesla has started to deploy the 2026 Summer Update to owners across its fleet, and among the biggest changes are improvements to Navigation, a new startup animation for the Model 3 and Model Y, Caraoke scoring, and new capabilities for Grok.
As the update has started making its way to some cars, we can now see a few of the features operating in real-time. We will show you what some of the new features look like in this article, along with some additional details on what changed.
Not all of the new features in the 2026 Summer Update have quite made an appearance, but some of them have, so we’ll show those here:
New Animation Screen for 3/Y
Tesla is rolling out a new startup animation for Tesla Model 3 and Model Y owners. This is present in Launch Edition and Performance Model 3 and Model Y, but other trim levels do not have anything like this.
The new animation screen on Model 3/Y with the 2026 Summer Update
Apparently color will also be customizable: pic.twitter.com/wSdwggtG3S
— TESLARATI (@Teslarati) July 27, 2026
Owners can adjust the color associated with the startup animation to suit their preferences. It is a surprise that more automakers do not focus on this animation for their vehicles; it can be a great first impression piece and make the car immediately feel more luxurious.
Tesla has included this on more premium trims, but it is nice to see it on the Model 3 and Model Y.
Grok Improvements
Grok can now adjust more things in the car outside of the Navigation system. Now, drivers can adjust anything from climate to driving settings by simply speaking to the AI assistant in the car:
@Tesla‘s AI assistant (Grok) with its new vehicle commands in action.
Set the climate, your destination and vehicle settings all in one go! pic.twitter.com/0bBTqaAk6G
— Not a Tesla App (@NotATeslaApp) July 28, 2026
You don’t even have to push a button, either. Instead, you can just say “Hey, Grok,” if you have it enabled. That feature rolled out with the 2026 Spring Update just a few months back.
This is a great feature, especially pertinent for the Robotaxi platform, as there will be no buttons inside the Cybercab when it eventually starts giving rides to the public. It also broadens Grok’s capabilities, which were relatively limited in terms of vehicle setting adjustments beforehand.
Tesla briefly offered one Robotaxi part in its Parts Catalog for your personal car, only to remove it just a short time after it was first noticed.
Tesla’s Robotaxi camera washer apparatus was briefly available for purchase on the company’s Online Parts Catalog. The camera washer was first noticed on Model Y Robotaxi vehicles about six months ago in Austin.
🚨 Tesla looks to have installed Camera Washers on the side repeater cameras on Robotaxis in Austin
pic.twitter.com/xemRtDtlRR— TESLARATI (@Teslarati) January 23, 2026
First noticed by Not a Tesla App, the Camera Washer entries appeared for the new “Juniper” Model Y under a category called “Halo,” which has also now disappeared. Interestingly, Halo probably is related to Tesla’s internal “Project Halo,” which was a project that aimed to retrofit customer-owned Model Ys into functional Robotaxis.
This hardware addition would likely be required for the vehicle to operate as a Robotaxi, as the Camera Washer seems to be a non-negotiable part of the vision-based system Tesla utilizes for self-driving efforts.
However, this part has since been removed and is no longer visible on the EPC.
Now the true question lingers: Why would Tesla add this Camera Washer to the Model Y parts catalog? Is it planning to make it available for owners to utilize on their own cars for personal use, or will it become a prerequisite for Robotaxi operation in customer-owned cars?
While discussing the upgrade options for Hardware 3 vehicles during the Q1 Earnings Call, Tesla CEO Elon Musk had said that the company could establish small, satellite shops that would upgrade cameras and self-driving computers. Perhaps this same strategy could be utilized for vehicles that want to be included in Robotaxi but do not have the correct hardware.
AI4 is currently represented as capable of unsupervised self-driving, and the same was said about HW3 at one point, only for Tesla to admit last quarter that it would, unfortunately, not be possible. Perhaps AI4 vehicles might need this camera washer as a prerequisite, just as HW3 cars will need that camera and computer upgrade.
This could be the first hint of that’s where we are headed.
Tesla has started rolling out a broader change to the ride experience for its Robotaxi fleet by silencing turn signals, but the change is certainly polarizing.
Tesla has generally made it clear that its purpose-built ride-hailing platform, Robotaxi, will cater to the rider in nearly every way possible. This includes having climate preferences, music, and other personal settings loaded up in the car as the rider enters.
But Tesla is taking it a step further by muting turn signal chimes altogether, a change that appears to be a way to make the ride more peaceful:
Tesla has finally turned off the blinker/turn signal noises in their Model Y Robotaxis.
This is a small update, but will definitely be noticeable for riders. It didn’t really make much sense to leave the turn signal sound on when it’s Unsupervised. pic.twitter.com/ITwx60PAMO
— Sawyer Merritt (@SawyerMerritt) July 27, 2026
However, there are a handful of people who are not thrilled about this change. Turn signals are a conditioned part of the human mind for those who ride in a car regularly.
Taking a turn without one feels strange and odd, and not hearing it click while activated could set off some alarms for riders, who might use the noise as confirmation that other drivers know of their intention to turn.
I kind of like it being on, threw me off when riding with Zoox who has had it disabled
— Dan Burkland (@DBurkland) July 27, 2026
Turn signal noises are still audible in customer cars, so if you use FSD in your personal vehicle, you will still hear the turn signal.
The move is certainly one that is unique, but not one that separates it from other ride-sharing services. In a normal car, the clicking sound confirms to the driver that the blinker is active. In a fully driverless Robotaxi, that feedback serves no purpose for passengers, other than peace of mind.
Tesla unlocks in-car web conferencing to extend Google Meet, Teams and beyond
Tesla Summer Update begins rolling out: a look at the new features
