Connect with us

News

SpaceX’s Starship to grow in height as workers prepare to stack its top section

SpaceX technicians work to lift Starship Mk1 onto a mobile 'Roll-Lift" transport for easier movement around its production facilities. (Elon Musk)

Published

on

SpaceX CEO Elon Musk has teased new details and posted several new photos of Starship Mk1, taken on September 25th as employees worked to lift the spacecraft’s lower half onto a mobile transporter. Up next: stacking the rocket’s two halves to reach its final 50m (160 ft) height.

The company is currently working around the clock to complete Starship Mk1’s assembly and integration ahead of Elon Musk’s planned September 28th presentation, meant to provide a detailed update on the state of the next-generation rocket’s design and development. A huge amount of work clearly remains but SpaceX is making major, visible progress almost every single day along the path to Starship’s first flight tests.

Taken yesterday afternoon, Musk’s photos show scenes before and after technicians placed Starship Mk1’s lower half – its tank and propulsion section – on a ‘Roll-Lift’, a small transporter. It’s unclear why exactly this was done, but SpaceX moved the spacecraft prototype about 100m and then removed it from the transporter.

The most recent movement happened just a few hours ago – technicians used a crane delivered on September 24th to lift the half-Starship onto what looked like half a dozen steel blocks on the ground, all captured live on LabPadre’s 24/7 livestream. In order to install Starship Mk1’s separate landing legs, believed to attach somewhere inside the vehicle’s aft circumference, SpaceX likely needed to lift the aft section off the concrete mount that had been its home for the past several months.

Elon Musk also confirmed that Starship Mk1 will have six landing legs, another strong indicator that the ongoing Thursday morning work is focused on preparing Starship Mk1 for leg installation. According to Musk, Starship Mk1 will weigh as much as 200 metric tons (440,000 lb) empty, which is probably why the rocket prototype’s aft – and heaviest – half had to be loaded onto a Roll-Lift and could not simply be moved by the crane itself.

Starship’s updated design remains a bit of a mystery just two days before Elon Musk is scheduled to present an update, likely including new renders from SpaceX itself. It remains to be seen if Starship’s six landing legs will be fixed (versus retractable) or if the legs on the windward side of the ship will jut out into the airstream. To ensure stability when landing on unprepared terrain, as Musk described, six legs are certainly better than three, but the actual span of those legs is a more relevant determinant of stability. Wide, Falcon 9-style legs would be optimal, indicating that the final ship will likely lean towards legs that can be retracted or at least angled behind Starship’s reentry ‘shadow’.

Still a prototype (and possibly meant solely for suborbital operation), Starship Mk1 (and Mk2) may feature simplified legs and mechanisms to speed things along, serving as more of a rough draft while Starhopper was akin to a Starship abstract or prospectus. At this rate, we won’t have to wait very long at all to find out.

Advertisement

Check out Teslarati’s Marketplace! We offer Tesla accessories, including for the Tesla Cybertruck and Tesla Model 3.

Eric Ralph is Teslarati's senior spaceflight reporter and has been covering the industry in some capacity for almost half a decade, largely spurred in 2016 by a trip to Mexico to watch Elon Musk reveal SpaceX's plans for Mars in person. Aside from spreading interest and excitement about spaceflight far and wide, his primary goal is to cover humanity's ongoing efforts to expand beyond Earth to the Moon, Mars, and elsewhere.

News

Elon Musk confirms Tesla FSD V14.2 will see widespread rollout

Musk shared the news in a post on social media platform X.

Published

on

Credit: Whole Mars Catalog/X

Elon Musk has confirmed that Tesla will be implementing a wide rollout of Full Self-Driving (FSD) V14 with the system’s V14.2 update. Musk shared the news in a post on social media platform X. 

FSD V14.1.2 earns strong praise from testers

Musk’s comment came as a response to Tesla owner and longtime FSD tester AI DRIVR, who noted that it might be time to release Full Self-Driving to the fleet because V14.1.2 has already become very refined.

“95% of the indecisive lane changes and braking have been fixed in FSD 14.1.2. I haven’t touched my steering wheel in two days. I think it’s time, Tesla AI,” the longtime FSD tester wrote

AI DRIVR’s comment received quite a bit of support from fellow Tesla drivers, some of whom noted that the improvements that were implemented in V14.1.2 are substantial. Others also agreed that it’s time for FSD to see a wide release.

In his reply to the FSD tester, CEO Elon Musk noted that FSD V14’s wide release would happen with V14.2. “14.2 for widespread use,” Musk wrote in his reply

Advertisement

Mad Max mode makes headlines

One of the key features that was introduced with FSD’s current iteration is Mad Max mode, which allows for higher speeds and more frequent lane changes than the previous “Hurry” mode. Videos and social media posts from FSD testers have shown the system deftly handling complex traffic, merging seamlessly, and maintaining an assertive but safe driving behavior with Mad Max mode engaged.

Tesla AI head Ashok Elluswamy recently noted in a post on X that Mad Max mode was built to handle congested daytime traffic, making it extremely useful for drivers who tend to find themselves in heavy roads during their daily commutes. With Musk now hinting that FSD V14.2 will go on wide release, it might only be a matter of time before the larger Tesla fleet gets to experience the notable improvements of FSD’s V14 update.

Continue Reading

News

Multiple Tesla Cybercab units spotted at Giga Texas crash test facility

The vehicles were covered, but one could easily recognize the Cybercab’s sleek lines and compact size.

Published

on

Credit: @JoeTegtmeyer/X

It appears that Tesla is ramping up its activities surrounding the development and likely initial production of the Cybercab at Giga Texas. This was, at least, hinted at in a recent drone flyover of the massive electric vehicle production facility in Austin. 

Cybercab sightings fuel speculations

As observed by longtime Giga Texas drone operator Joe Tegtmeyer, Tesla had several covered Cybercab units outside the facility’s crash testing facility at the time of his recent flyover. The vehicles were covered, but one could easily recognize the Cybercab’s sleek lines and compact size. Tegtmeyer also observed during his flyover that production of the Model Y Standard seems to be hitting its pace.

The drone operator noted that the seven covered Cybercabs might be older prototypes being decommissioned or new units awaiting crash tests. Either scenario points to a ramp-up in Cybercab activity at Giga Texas, however. “In either case, this is another datapoint indicating production is getting closer to happening,” Tegtmeyer wrote on X, highlighting that the autonomous two-seaters were quite exciting to see.

Cybercab production targets

This latest sighting follows reports of renewed Cybercab appearances at both the Fremont Factory and Giga Texas. A test unit was recently spotted driving on Giga Texas’ South River Road. Another Cybercab, seen at Tesla’s Fremont Factory, appeared to be manually driven, suggesting that the vehicle’s current prototypes may still be produced with temporary steering controls.

The Tesla Cybercab is designed to be the company’s highest-volume vehicle, with CEO Elon Musk estimating that the autonomous two-seater should see an annual production rate of about 2 million units per year. To accomplish this, Tesla will be building the Cybercab using its “Unboxed” process, which should help the vehicle’s production line achieve outputs that are more akin to consumer electronics production lines.

Advertisement
Continue Reading

Elon Musk

Teslas in the Boring Co. Vegas Loop are about to get a big change

Elon Musk has a big update for Teslas that operate within the Boring Company’s Vegas Loop.

Published

on

the boring company's vegas loop entrance
(Credit: Sam Morris, LVCVA/Las Vegas News Bureau)

Tesla vehicles operating in the Boring Company’s Vegas Loop are about to get a big change, CEO Elon Musk said.

In Las Vegas, the Boring Company operates the Vegas Loop, an underground tunnel system that uses Teslas to drop people off at various hotspots on the strip. It’s been active for a few years now and is expanding to other resorts, hotels, and destinations.

Currently, there are stops at three resorts: Westgate, the Encore, and Resorts World. However, there will eventually be “over 100 stations and span over 68 miles of tunnel,” the Vegas Loop website says.

The Loop utilizes Tesla Model 3 and Model Y vehicles to send passengers to their desired destinations. They are currently driven using the Full Self-Driving suite, but they also have safety drivers in each vehicle to ensure safety.

Tesla Cybertruck rides are crucial for Vegas Loop expansion to airport

Tesla and the Boring Company have been working to remove drivers from the vehicles used in the Loop, but now, it appears there is a set timeline to have them out, according to CEO Elon Musk:

Musk says the Boring Co. will no longer rely on safety drivers within the Teslas for operation. Instead, Tesla will look to remove the safety drivers from the cars within the next month or two, a similar timeline for what Musk believes the Robotaxi platform will look like in Austin.

In Texas, as Robotaxi continues to operate as it has since June, there are still safety monitors within the car who sit in the passenger’s seat. They are there to ensure a safe experience for riders.

When the route takes the vehicle on the highway, safety monitors move into the driver’s seat.

However, Tesla wants to be able to remove safety monitors from its vehicles in Austin by the end of the year, Musk has said recently.

In early September, Musk said that the safety monitors are “just there for the first few months to be extra safe.” He then added that there “should be no safety driver by end of year.”

Continue Reading

Trending