Connect with us

News

SpaceX Falcon 9 Starlink launch eyes two reusability milestones as new satellite details emerge

Falcon 9 B1048, a fresh upper stage, and 60 Starlink satellites went vertical and LC-40 on November 10th. (SpaceX)

Published

on

SpaceX is set for Falcon 9’s first orbital launch in more than three months. Known as Starlink-1, the mission will launch the company’s heaviest satellite payload ever and feature an impressive array of Falcon 9 booster and fairing reusability milestones.

Flatsat stack

Prior to Falcon 9 going vertical on the launch pad, SpaceX technicians had to construct and encapsulate a massive stack of 60 Starlink satellites, each weighing more than 260 kg (570 lb) apiece. This is the second time SpaceX has launched sixty of the advanced spacecraft, although the satellites that will launch on Starlink-1 feature a number of upgrades and refinements not present on the Starlink v0.9 satellites that launched in May 2019.

Without an identical angle from the Starlink v0.9 mission to compare against, it’s difficult to immediately point out visual differences between v0.9 and v1.0 spacecraft. Still, there are some clear general changes. Most notably, SpaceX appears to have dramatically reduced the area of shiny, metallic surfaces. Additionally, the small downward-facing dishes just left of center in the above image were not obviously present on Starlink v0.9 satellites or SpaceX’s official renders.

A general overview of Starlink’s bus, launch stack, and solar array. (SpaceX)
60 Starlink v0.9 satellites are prepared for orbital launch debut in May 2019. (SpaceX)

Those new dishes could be traditional dish antennas meant to serve as a more basic telemetry, tracking, and command (TTC) communications link for ground controllers. They could even be a prototype of Starlink’s planned inter-satellite laser data links. Regardless, it’s obvious that SpaceX is continuing its preferred cycle of rapid prototyping, flight-testing, and data-based refinement with Starlink.

SpaceX is also focused on dramatically lowering the albedo (reflectivity) of Starlink satellites and working closely with the astronomy and astrophysics communities to minimize any disruption the spacecraft might cause for scientific observations of the night sky. For any part that will be ground-facing during routine operations, this likely involves replacing shiny surfaces with matte finishes and adding dark or non-reflective coatings/insulation where possible, among other potential tweaks.

The more milestones, the merrier

Beyond the many apparent satellite upgrades Starlink-1 is set to debut, the mission will also mark no less than three (or possibly even four) reusability milestones. Falcon 9 booster B1048 has been selected by SpaceX to support Starlink-1 and has already completed three successful orbital-class missions since it debuted in July 2018. Assuming all goes well, B1048 will thus become the first SpaceX booster to launch (and land) four times, an excellent – if increasingly unsurprising – step forward for Falcon 9’s Block 5 upgrade. Falcon 9 B1048 will attempt its fourth landing – this time on drone ship Of Course I Still Love You (OCISLY) – shortly after launch.

Advertisement

Designed to enable up to 10 reuses of each Falcon booster, the successful completion of Starlink-1 will place Block 5 just one reuse away from the halfway point to proving its 10-reuse design. While Block 5 has yet to materialize any tangible improvements in booster turnaround time, an imminent ramp in Starlink launch cadence will hopefully give SpaceX plenty of opportunities to start making progress on that front.

Starlink-1 is also set to mark the inaugural launch of a flight-proven Falcon 9 fairing, essentially putting a bow on the bulk of SpaceX’s challenging fairing recovery and reusability development. Unintuitively, Starlink-1’s fairing previously supported Falcon Heavy Block 5’s April 209 launch debut, meaning that both halves traveled both faster and higher than any halves that previously attempted recovery.

Simultaneously, both halves splashed down in the Atlantic Ocean with no attempt to catch them, meaning that SpaceX has apparently successfully refurbished the fairings despite the fact that their recovery was more or less the worst-case scenario.

SpaceX’s first-ever flight-proven Falcon fairing sits a thrice-flown Falcon 9 booster on November 10th. (SpaceX)

Last but not least, Starlink-1 will also mark the first time SpaceX’s just-finished fairing recovery ship GO Ms. Chief attempts to catch a Falcon 9 fairing, as well as the first time two fairing recovery ships – Ms. Tree & Ms. Chief – attempt to catch both halves of a Falcon fairing after launch. The twin recovery vessels departed Port Canaveral, Florida a few days ago and arrived at their recovery point ~750 km (460 mi) downrange on November 10th.

Finally, thanks to the fact that Falcon 9’s fairing is flight-proven, Starlink-1 will additionally feature the first attempted recovery (catch or splashdown) of a flight-proven Falcon fairing. SpaceX could scarcely fit in another milestone if it wanted to go out of its way to do so.

GO Ms. Chief departs Port Canaveral on October 23rd for some of her first sea trials after net installation. (Richard Angle)
Greg Scott captured the first-ever view of both SpaceX fairing recovery ships – Ms. Tree and Ms. Chief – departing Port Canaveral for sea trials. (Greg Scott)

Falcon 9 is scheduled to lift off no earlier than 9:56 am ET (14:56 UTC), November 11th. Weather is 80% GO and SpaceX has a backup launch window around the same time on November 12th with a 70%-favorable weather forecast.

Check out Teslarati’s Marketplace! We offer Tesla accessories, including for the Tesla Cybertruck and Tesla Model 3.

Advertisement

Eric Ralph is Teslarati's senior spaceflight reporter and has been covering the industry in some capacity for almost half a decade, largely spurred in 2016 by a trip to Mexico to watch Elon Musk reveal SpaceX's plans for Mars in person. Aside from spreading interest and excitement about spaceflight far and wide, his primary goal is to cover humanity's ongoing efforts to expand beyond Earth to the Moon, Mars, and elsewhere.

Advertisement
Comments

News

Tesla Model Y L has two distinct features for luxurious comfort

This is not to say the other interior additions are not factors in the Model Y becoming a more luxurious and premium vehicle, but the two mentioned in this article are particularly pertinent in that conversation.

Published

on

Credit: Tesla

Tesla’s new Model Y L has two distinct features that are geared toward giving occupants a taste of luxury with guaranteed comfort.

These two features should definitely be part of the company’s future lineup, and they could prove to be massive upgrades to the Model Y’s interior, which is certainly premium but is missing some things that truly tailor to a “luxury” feel of an automobile.

This is not to say the other interior additions are not factors in the Model Y becoming a more luxurious and premium vehicle, but the two mentioned in this article are particularly pertinent in that conversation.

Tesla Model Y L might not come to the U.S., and it’s a missed opportunity

Power-Adjustable Thigh Supports

In the front seats of the Model Y L, there are power-adjustable thigh supports that will enable some additional comfort on the legs:

Most might think that these thigh supports are simply a feature that makes the ride more comfortable, which is true. However, they have benefits for the ride and after you exit the car.

Providing proper lift on the legs and thighs can be beneficial for people with back problems or posture issues. The lower back takes an increased amount of stress during long car rides, especially as the legs are fixed in the chosen seating position.

Tesla Model Y L officially launched: price, features, and more

Adding some support to the thighs can help reduce pressure on the lower back and hips, and distribute weight more evenly, taking stress off pressure points.

It can also contribute to better spinal alignment. They also have safety benefits, as some riders could have an improved seatbelt position thanks to the thighs being in this position.

Second-Row Mechanical Armrest

Tesla also added mechanical, one-touch armrests to the Model Y L’s second row, a nice and premium touch for the riders in the middle of the vehicle:

Add the additional space the Model Y L provides to riders, and it already gets more comfortable. However, the addition of the mechanical armrests gives a good option of comfort for those who are seated in the second row.

They can also be retracted with the touch of a button, allowing for those in the third row to exit the vehicle easily.

One con to the mechanical portion of these armrests is that it is another moving part, and, of course, that puts it at risk of having issues.

However, it is certainly more premium than a manual armrest, and the flashy carbuyers will appreciate this small but mighty addition.

Continue Reading

News

Tesla’s NHTSA probe is already on its way to being resolved

The problem the NHTSA had with Tesla’s reporting is already on its way to being resolved, as the agency and the company have been in communication.

Published

on

tesla showroom
Credit: Tesla

Tesla is being probed by the National Highway Traffic Safety Administration (NHTSA) for not reporting accidents in a timely manner, the agency said on Thursday.

It is already well on its way to being resolved, the agency said.

The agency’s Office of Defects Investigation (ODI) identified numerous instances in which Tesla reported crashes that “occurred several months or more before the dates of the reports.”

The Standing General Order in place by the agency requires crash reports to be submitted within five days of Tesla receiving the notice of an accident.

The investigation states Tesla submitted crashes in one of two ways:

“Many of the reports were submitted as part of a single batch, while others were submitted on a rolling basis.”

The problem the NHTSA had with Tesla’s reporting is already on its way to being resolved, as the agency and the company have been in communication.

Tesla has already been in contact with the agency’s ODI and stated that the timing of the reports was an issue with its data collection. The issue has been resolved, Tesla told them.

The NHTSA said the initiation of the probe against Tesla is a “standard process for reviewing compliance with legal requirements, to evaluate the cause of potential delays in reporting, the scope of any such delays, and the mitigations that Tesla has developed to address them.”

It is the latest NHTSA probe into Tesla, as it has also been investigating the company for accidents during Full Self-Driving operation in reduced visibility conditions.

The agency also sought information on the rollout of Robotaxi a few months ago, and how Tesla planned to handle low-visibility conditions in its driverless ride-hailing service.

The NHTSA was interested in knowing how Tesla planned to assess the ability of FSD’s engineering controls, whether any other similar FSD crashes had occurred in low visibility, and if modifications to FSD software would impact its performance in these conditions.

Continue Reading

News

Tesla rolls out minor but significant improvement to Robotaxi service

As per Tesla, Robotaxis will now arrive at their pickup locations with their doors locked.

Published

on

Credit: @AdanGuajardo/X

Tesla has rolled out a minor but significant improvement to its Robotaxi service. The update was shared by the Tesla community on social media platforms such as X. 

New Robotaxi App update

As observed by the electric vehicle community on social media, Tesla has started rolling out the Robotaxi App’s Version 25.8.5 (6074) to users. The update seems to be quite minor, though Tesla mentioned something quite notable the update’s “What to Test” section.

As per Tesla, Robotaxis will now arrive at their pickup locations with their doors locked. Customers would not need to unlock the Robotaxis manually, however, as the vehicles would automatically unlock as they approach the car. “You ride now arrives locked and will automatically unlock as you walk up. Just ensure your app has Bluetooth access enabled,” Tesla wrote.

While this update is minor, it does improve the safety of the vehicles themselves. It also provides another layer of convenience for users of the driverless ride-hailing service. The fact that Tesla is already refining the Robotaxi App’s features this early bodes well for the program. It suggests, if any, that the service will already be fairly refined when it starts being opened to more users.

Robotaxi praised for its safety

Tesla is following a deliberate and cautious rollout strategy for its Robotaxi rollout, though early reviews of the system have been quite positive. Some reviewers have also dubbed Tesla’s Robotaxi service as a safer alternative to more conventional ride-hailing services such as Uber.

Advertisement

This was highlighted by auto reviewer Scotty Reiss in a post on A Girl’s Guide to Cars.

“I like the personal safety factor. No driver to threaten or harass you. You control the locking and unlocking of the car. You can change the pickup location at any time. The car will wait for you. You can call the support desk if you need help. You can change your destination if the drop-off area seems sketchy. All of it together makes me feel safer getting a car home from the airport at midnight or into the city after dark, and I definitely feel safer having my daughters take a self-driving rideshare when they go out to meet friends for dinner,” Reiss wrote in her post.

Continue Reading

Trending