Connect with us

News

SpaceX Starship prototype days away from first Raptor static fire test

Published

on

SpaceX’s latest Starship appears to be just a few days away from becoming the first full-scale prototype to attempt a static fire test with a functional Raptor engine, potentially setting the rocket up for a hop test in the near future.

On April 26th, SpaceX teams successfully filled the fourth full-scale Starship prototype with ~1000 metric tons (~2.2 million lb) of liquid nitrogen, pressurized it to roughly 5 bar (70 psi), and exerted hundreds of tons of force on its “thrust puck” engine section with hydraulic rams. Every part of the test appears to have been completed without issue, making Starship SN4 the first to pass cryogenic proof testing and graduate to riskier tests.

Since then, SpaceX technicians and engineers have been carefully inspecting Starship and likely cleaning its cavernous propellant tanks, while also preparing a lone Raptor engine for installation. By all appearances, that engine installation milestone could occur anytime within the next 24 hours and based on public road closure schedules, the first static fire attempt could occur just a day (or less) later.

SpaceX’s latest Starship prototype could be just a few days away from its first Raptor static fire test. (LabPadre)

Capable of producing at least 200 metric tons (~450,000 lbf) of thrust, SpaceX CEO Elon Musk recently revealed that Starship SN4 will only have one Raptor engine installed. Instead, the first multi-engine static fire and flight tests are planned for its successor, Starship SN5, with SN4 apparently set to feature an asymmetric engine layout.

Starship SN4’s thrust structure and engine section are pictured here on April 12th, confirming that it’s nominally designed to host three engines. (NASASpaceflight – bocachicagal)

Designed for three engines in a triangle formation, Starship’s existing engine section and thrust structure (thrust puck) would need an inefficient one-off redesign or heavy modifications to allow a single Raptor engine to be installed directly in the center of the rocket. Unsurprisingly, SpaceX chose not to waste resources on a one-off addition to a serial prototype. Instead, if Starship survives static fire testing and the asymmetric stress that will create, the rocket may apparently attempt to launch and land with the same setup.

This would very likely result in Starship SN4 both lifting off and landing at an angle, effectively drifting its way off the launch mount and onto an adjacent landing pad.

Advertisement
Raptor performs a static fire test in McGregor, Texas. (SpaceX)
Starship SN4 could soon attempt to replicate Starhopper’s spectacular 150m hop. (SpaceX)

Before that potentially bizarre flight test and the static fire that must precede it, however, SN4 must also complete the first full-scale Starship wet dress rehearsal (WDR), referring to the process of fully fueling a rocket and performing a launch countdown without actually launching. It’s likely that SpaceX plans to roll Starship SN4’s WDR directly into a static fire test, meaning that the massive rocket could ignite a Raptor engine as early as Friday, May 1st.

Stay tuned for visual confirmation of Raptor engine installation on Starship SN4!

Eric Ralph is Teslarati's senior spaceflight reporter and has been covering the industry in some capacity for almost half a decade, largely spurred in 2016 by a trip to Mexico to watch Elon Musk reveal SpaceX's plans for Mars in person. Aside from spreading interest and excitement about spaceflight far and wide, his primary goal is to cover humanity's ongoing efforts to expand beyond Earth to the Moon, Mars, and elsewhere.

Advertisement
Comments

Elon Musk

Tesla ramps Cybercab test manufacturing ahead of mass production

Tesla still has plans for volume production, which remains between four and eight weeks away, aligning with Musk’s statements that early ramps would be deliberately measured given the Cybercab’s novel architecture and full reliance on Tesla’s vision-based Full Self-Driving technology.

Published

on

Credit: Joe Tegtmeyer | X

Tesla is seemingly ramping Cybercab test manufacturing ahead of mass production, which is scheduled to begin next month, the company said.

At Tesla’s Gigafactory Texas, production of the Cybercab, the company’s groundbreaking purpose-built Robotaxi vehicle, is accelerating markedly. Drone footage from Joe Tegtmeyer captured striking aerial footage today, revealing what appears to be the largest public sighting of Cyebrcabs to date.

A total of 25 units were observed by Tegtmeyer across the Gigafactory Texas property, marking a clear step-up in testing and validation activities as Tesla prepares for a broader output.

Tesla Cybercab production begins: The end of car ownership as we know it?

In the footage, 14 metallic gold Cybercabs were parked in a tight formation outside the factory exit, showcasing their sleek, autonomous-only design with no steering wheels, pedals, or traditional controls. Another 9 units sat at the crash testing facility, likely undergoing structural and safety validations, while two more appeared at the west end-of-line area for final checks.

Tegtmeyer noted additional Cybercabs driving around the complex, hinting at active movement and real-world testing beyond static parking.

This surge follows the first production Cybercab rolling off the line in mid-February 2026, several weeks ahead of the originally anticipated April start.

That milestone, celebrated by Tesla employees and confirmed by CEO Elon Musk, kicked off low-volume builds on the dedicated “unboxed” manufacturing line, a modular process designed to slash costs, reduce factory footprint, and enable faster assembly compared to conventional methods.

Industry observers interpret the jump to dozens of visible units in early March as evidence that Tesla has transitioned into higher-volume test manufacturing.

Tesla still has plans for volume production, which remains between four and eight weeks away, aligning with Musk’s statements that early ramps would be deliberately measured given the Cybercab’s novel architecture and full reliance on Tesla’s vision-based Full Self-Driving technology.

The Cybercab, envisioned as a sub-$30,000 autonomous two-seater for robotaxi fleets, represents Tesla’s bold pivot toward scalable autonomy and robotics.

Tesla fans and enthusiasts on X praised the imagery, with many expressing excitement over the visible progress toward deployment. While challenges remain, including software maturity, regulatory hurdles, and supply chain scaling, the increased factory activity underscores Tesla’s momentum in turning the Cybercab vision into reality.

As Giga Texas continues expanding and refining the manufacturing process of the Cybercab, the coming months will prove to be a pivotal time in determining how quickly this revolutionary vehicle reaches roads in the U.S. and internationally.

Continue Reading

Elon Musk

SpaceX to launch Starlink V2 satellites on Starship starting 2027

The update was shared by SpaceX President Gwynne Shotwell and Starlink Vice President Mike Nicolls.

Published

on

Credit: SpaceX

SpaceX is looking to start launching its next-generation Starlink V2 satellites in mid-2027 using Starship.

The update was shared by SpaceX President Gwynne Shotwell and Starlink Vice President Mike Nicolls during remarks at Mobile World Congress (MWC) in Barcelona, Spain.

“With Starship, we’ll be able to deploy the constellation very quickly,” Nicolls stated. “Our goal is to deploy a constellation capable of providing global and contiguous coverage within six months, and that’s roughly 1,200 satellites.”

Nicolls added that once Starship is operational, it will be capable of launching approximately 50 of the larger, more powerful Starlink satellites at a time, as noted in a Bloomberg News report.

Advertisement

The initial deployment of roughly 1,200 next-generation satellites is intended to establish global and contiguous coverage. After that phase, SpaceX plans to continue expanding the system to reach “truly global coverage, including the polar regions,” Nicolls said.

Currently, all Starlink satellites are launched on SpaceX’s Falcon 9 rocket. The next-generation fleet will rely on Starship, which remains in development following a series of test flights in 2025. SpaceX is targeting its next Starship test flight, featuring an upgraded version of the rocket, as soon as this month.

Starlink is currently the largest satellite network in orbit, with nearly 10,000 satellites deployed. Bloomberg Intelligence estimates the business could generate approximately $9 billion in revenue for SpaceX in 2026.

Nicolls also confirmed that SpaceX is rebranding its direct-to-cell service as Starlink Mobile.

Advertisement

The service currently operates with 650 satellites capable of connecting directly to smartphones and has approximately 10 million monthly active users. SpaceX expects that figure to exceed 25 million monthly active users by the end of 2026.

Continue Reading

Elon Musk

Elon Musk’s xAI and X to pay off $17.5B debt in full: report

The update was shared initially in a report from Bloomberg News, which cited people reportedly familiar with the matter.

Published

on

Credit: xAI

Elon Musk’s social platform X and artificial intelligence startup xAI are reportedly preparing to repay approximately $17.5 billion in outstanding debt in full. 

The update was shared initially in a report from Bloomberg News, which cited people reportedly familiar with the matter.

Morgan Stanley, which arranged the debt financing for both companies, has reportedly informed existing lenders that X and xAI plan to pay back the full amount of the $17.5 billion debt. Bloomberg’s sources did not disclose where the capital for the repayment would be coming from.

X, formerly known as Twitter, assumed roughly $12.5 billion in debt during Musk’s acquisition of the company. xAI separately borrowed about $5 billion through bonds and loans last June. The two firms merged last year under xAI Holdings.

Advertisement

Bloomberg noted that portions of the debt are relatively recent and may carry early repayment penalties. xAI’s $3 billion in high-yield bonds are expected to be redeemed at 117 cents on the dollar, reflecting a premium since the debt was expected to stay outstanding for at least two years.

X has been servicing tens of millions of dollars in monthly debt payments, while xAI has reportedly been burning approximately $1 billion in cash per month as it invests heavily in data centers, chips, and AI talent. That being said, xAI also concluded a funding round in January, where it raised $20 billion of new equity.

The repayment plans come as Musk consolidates several of his businesses. SpaceX recently acquired xAI, making it a subsidiary as the company explores plans for space-based data centers. The combined entity has been valued at approximately $1.25 trillion.

Bloomberg previously reported that SpaceX is targeting a confidential IPO filing as soon as this month, potentially positioning the private space firm for a public listing later this year. Representatives for Morgan Stanley declined to comment, and X and xAI did not immediately respond to requests for comment.

Advertisement
Continue Reading