Connect with us

News

Elon Musk says SpaceX’s second Starship booster prototype is almost finished

Starship SN16 and Booster 3, May 28th. (Elon Musk)

Published

on

SpaceX CEO Elon Musk says that the second Starship booster prototype is “almost done” and has revealed that work on the first flightworthy booster has yet to begin.

For unknown reasons, SpaceX has recently changed the naming scheme for Starship and Super Heavy boosters. The booster SpaceX is currently assembling in Boca Chica has been referred to as “Booster 2” by Musk himself but, according to NASASpaceflight, is internally known as Booster 3 or B3, replacing its former Booster Number 3 (BN3) designation.

Regardless, SpaceX began stacking the Super Heavy booster prototype now known as B3 in mid-May. Around six weeks later, 23 or 24 rings have been stacked to create a partially finished prototype 9m (~30 ft) wide and approximately 42m (~140 ft) tall.

Just like Super Heavy ‘pathfinder’ BN1, which was scrapped almost the instant it reached its full height last March, Booster 3 appears to destined to stand 36 rings – 65m (~215 ft) – tall once complete. While drastically oversimplifying the process of vertically assembling the largest rocket booster ever built, that means that Super Heavy B3 is just shy of two-thirds (~65%) complete.

By simply averaging the time it’s taken for SpaceX to stack B3 to a height of 42 meters, the booster could reach its full height around three weeks from now (July 15th, give or take a week). For the most part, the most challenging and unfamiliar parts of Super Heavy B3 manufacturing and assembly have already been completed. Relative to Starship, which SpaceX has now built more than half a dozen prototypes of, Super Heavy is just a stretched Starship with no flaps, no nosecone, a far more complex engine section, and a forward dome section that needs to support car-sized grid fins.

Advertisement

Super Heavy’s larger propellant tanks also require a methane transfer tube – used to carry methane through the booster’s lower liquid oxygen tank – more than twice as tall as anything built for Starship. By all appearances, that ~35m (~115 ft) tall transfer tube has already been safely installed inside B3’s incomplete tanks. Around June 14th, B3’s lower two-thirds were effectively completed when its LOx tank stack was mated to the booster’s 29-Raptor engine section.

Super Heavy Booster 1 reached its full height in March 2021 and was summarily scrapped a few weeks later. (NASASpaceflight – bocachicagal)

Outfitted with complex structural modifications to support massive grid fins and the first advanced ‘hot gas’ maneuvering thrusters ever spotted in public, Booster 3’s forward dome is already in the process of being welded to a stack of three steel rings. Once complete, the rest of Super Heavy B3 integration is fairly simple as far as rocket assembly goes and will require four more welding operations. Like BN1, there’s a good chance that SpaceX will mate Booster 3’s upper (methane) tank separately and then install the ~24m (~80 ft) tall, 13-ring section on top of the LOx stack to effectively complete the booster’s main structure

Of course, after the structure is complete, SpaceX will still need to finish plumbing, wiring, and generally outfitting a Super Heavy booster for the first time ever. Finally, while it remains to be seen just how finished B3 will actually find itself before heading to the launch pad, that process could also involve installing and testing four massive steel grid fins and, most importantly, up to 29 Raptor engines – a figure only beaten by the Soviet Union’s ill-fated N1 rocket.

Perhaps most significantly, Musk also revealed that B3 is not the Super Heavy booster assigned to Starship’s first orbital launch attempt, meaning that SpaceX will have to complete Booster 3 testing and build Booster 4 before that orbital test flight can occur. Given that Booster 3 assembly is on track to take more than nine weeks, Starship’s first orbital launch attempt is thus unlikely to happen before late August or September.

Eric Ralph is Teslarati's senior spaceflight reporter and has been covering the industry in some capacity for almost half a decade, largely spurred in 2016 by a trip to Mexico to watch Elon Musk reveal SpaceX's plans for Mars in person. Aside from spreading interest and excitement about spaceflight far and wide, his primary goal is to cover humanity's ongoing efforts to expand beyond Earth to the Moon, Mars, and elsewhere.

Advertisement
Comments

Elon Musk

Elon Musk shares unbelievable Starship Flight 10 landing feat

Flight 10’s Starship upper stage demonstrated impressive accuracy when it came to its target landing zone.

Published

on

Credit: SpaceX/X

SpaceX CEO Elon Musk recently shared an insane feat accomplished by Starship’s upper stage during its tenth test flight.

Despite the challenges it faced during its return trip to Earth, Flight 10’s Starship upper stage demonstrated impressive accuracy when it came to its target landing zone.

Against the odds

Musk’s update was shared on social media platform X. In a conversation about Starship upper stage’s return to Earth, Musk revealed that the upper stage splashed down just 3 meters (under 10 feet) from its intended target. Considering the size of the Starship upper stage and the ocean itself, achieving this accuracy was nothing short of insane.

Starship Flight 10 was a success as both the Super Heavy booster and Ship upper stage completed all their mission objectives. However, videos and images released by SpaceX showed the upper stage’s heat shield scorched golden-brown and parts of its aft skirt visibly missing. The flaps and other surfaces also bore signs of heavy stress from reentry.

SpaceX highlighted this in a post on X: “Starship made it through reentry with intentionally missing tiles, completed maneuvers to intentionally stress its flaps, had visible damage to its aft skirt and flaps, and still executed a flip and landing burn that placed it approximately 3 meters from its targeted splashdown point,” SpaceX noted.

Advertisement

A key milestone

The result stands in stark contrast to Starship’s earlier test flights this year, when all three prior upper-stage flights in 2025 ended in premature breakup before splashdown. Flight 10 not only marked the first successful splashdown of the year for the Starship upper stage, but it also delivered near-perfect precision despite its battered state, according to a Space.com report.

For SpaceX, this success is a critical proof point in developing a fully reusable launch system. A spacecraft capable of surviving severe reentry conditions and still landing within meters of its target underscores the robustness needed for future missions, including orbital payload deliveries and, eventually, landings on the Moon and Mars.

Continue Reading

News

New Tesla Model Y Performance launches from Giga Berlin

The vehicle is produced at Gigafactory Berlin and is available to order now in Europe and the Middle East.

Published

on

Credit: Tesla

It took some time, but the new Tesla Model Y Performance is finally here. The new Model Y Performance features a blend of aerodynamic improvements, upgraded interior comforts, and high range enabled by new battery cells. 

The updated Model Y Performance is produced at Gigafactory Berlin and is available to order now in Europe and the Middle East. First deliveries are expected in 1-2 months.

Key Model Y Improvements

The new Model Y Performance sharpens the vehicle’s design and driving dynamics while adding subtle interior refinements. The revised variant now delivers 0–60 mph in 3.3 seconds, slightly quicker than its predecessor’s 3.5 seconds, while offering an EPA-estimated 308 miles of range, just about 1% less than the non-performance Dual Motor All Wheel Drive variant. Top speed is listed at 155 mph.

The exterior of the new Model Y Performance features new front and rear fascias, along with a carbon fiber spoiler designed for greater downforce and reduced drag. Staggered wheels and tires provide improved steering precision and grip, while high-performance brakes offer enhanced pedal feel and better heat management. The ride is supported by adaptive suspension that adjusts damping based on road conditions, paired with unique drive modes tailored for high-speed performance. Ground clearance is listed at 6.1 inches, and weight is listed at 2,033 kilograms (4,482 pounds).

Tech and Interior

Inside, Tesla has added carbon fiber decor, expanded ambient lighting in the footwells and door pockets, and upgraded seating. The first-row sport seats now include power recline, power tilt, heating, ventilation, and powered thigh extensions for added support during cornering. Rear passengers receive perforated heated seats with power recline. A new 16-inch QHD center touchscreen anchors the cabin’s technology suite.

Advertisement

Additional upgrades include eight exterior cameras, with the refreshed design introducing a new forward-facing unit. The high-density battery pack also boosts charge capacity but also helps maintain range despite the Performance model’s added power output.

Continue Reading

Elon Musk

Elon Musk reveals when SpaceX will perform first-ever Starship catch

“Starship catch is probably flight 13 to 15, depending on how well V3 flights go,” Musk said.

Published

on

Credit: SpaceX

Elon Musk revealed when SpaceX would perform the first-ever catch attempt of Starship, its massive rocket that will one day take life to other planets.

On Tuesday, Starship aced its tenth test flight as SpaceX was able to complete each of its mission objectives, including a splashdown of the Super Heavy Booster in the Gulf, the deployment of eight Starlink simulators, and another splashdown of the ship in the Indian Ocean.

It was the first launch that featured a payload deployment:

SpaceX Starship Flight 10 was so successful, it’s breaking the anti-Musk narrative

SpaceX was transparent that it would not attempt to catch the Super Heavy Booster, something it has done on three previous occasions: Flight 5 on October 13, 2024, Flight 7 on January 16, and Flight 8 on March 6.

This time, it was not attempting to do so. However, there are bigger plans for the future, and Musk detailed them in a recent post on X, where he discussed SpaceX’s plans to catch Starship, which would be a monumental accomplishment.

Musk said the most likely opportunities for SpaceX to catch Starship itself would be Flight 13, Flight 14, and Flight 15, but it depends on “how well the V3 flights go.”

The Starship launched with Flight 10 was a V2, which is the same size as the subsequent V3 rocket but has a smaller payload-to-orbit rating and is less powerful in terms of initial thrust and booster thrust. Musk said there is only one more V2 rocket left to launch.

V3 will be the version flown through 2026, as V4, which will be the most capable Starship build SpaceX manufactures, is likely to be the first company ship to carry humans to space.

Musk said that SpaceX planned to “hopefully” attempt a catch of Starship in 2025. However, it appears that this will likely be pushed back to 2026 due to timing.

SpaceX will take Starship catch one step further very soon, Elon Musk confirms

SpaceX would need to launch the 11th and 12th test flights by the end of the year in order to get to Musk’s expected first catch attempt of Flight 13. It’s not unheard of, but the company will need to accelerate its launch rate as it has only had three test flights this year.

Continue Reading

Trending