Connect with us

News

SpaceX ready for back to back astronaut, Starlink launches

Published

on

Two SpaceX Falcon 9 rockets remain on track to attempt back-to-back astronaut and Starlink satellite launches later this week.

Both SpaceX East Coast drone ships Just Read The Instructions (JRTI) and A Shortfall of Gravitas (ASOG) and two new support and fairing recovery ships (Bob and Doug) are all headed northeast into the Atlantic Ocean, where they’ll soon reach landing zones stationed just ~50 km (~30 mi) apart. As early as 9:03pm EST Wednesday, November 10th (02:03 UTC 11 Nov), the first of those Falcon 9s is scheduled to lift off on its second mission for NASA, sending a new Crew Dragon and four international astronauts on their way to the International Space Station (ISS).

If all goes to plan, less than a day and a half later, a second Falcon 9 rocket will lift off from SpaceX’s other East Coast launch site as part of “Starlink 4-1” – the company’s first dedicated Florida Starlink launch in almost six months.

Starlink 4-1 is scheduled to launch NET 7:40am EST (12:40 UTC) on Friday, November 12th with Falcon 9 booster B1062, a new expendable upper stage, a (likely) reused fairing, and 53 Starlink V1.5 satellites – likely the first of their kind to launch from the East Coast. While the mission profile will be almost identical to all 29 of SpaceX’s dedicated East Coast Starlink launches, it will be targeting a slightly lower and different orbit to kick off the second of five constellation ‘shells’.

Unlike the ~1700 Starlink V1.0 satellites SpaceX launched over the last two years, the Starlink V1.5 satellites the company recently began launching feature a partially upgraded design but are mainly distinguished by the addition of several ‘space lasers’. More officially known as optical interlinks, those lasers will allow Starlink satellites to connect to each other and route communications entirely in orbit, exploiting the vacuum of space to create what amount to wireless fiber-optic links with bandwidth on the order of tens or hundreds of gigabits per second (Gbps). As a result, there’s a good chance that SpaceX will eventually replace the first-generation Starlink V1.0 constellation as soon as possible, leaving an upgraded and laser-linked copycat in their place.

Advertisement

If SpaceX interlinks most or all of its constellation with lasers, it could drastically simplify Starlink ground station operations and cut down on the bureaucratic work required to license and build those stations in virtually every country Starlink wants to operate in. It would also make it far easier for SpaceX to serve unprecedentedly high-quality internet to aircraft and ships – a captive market practically begging for disruption.

Each Starlink V1.5 satellite appears to have three laser link terminals. (SpaceX)

In a prelaunch briefing late on November 9th, SpaceX vice president Bill Gerstenmaier revealed that drone ship Just Read The Instructions (JRTI) – originally meant to support Crew-3’s booster landing – had gotten “beat up” by the Atlantic, forcing it to swap places with A Shortfall of Gravitas (ASOG). It’s unclear if the damage JRTI may or may not have received is enough to require a return to port, which could trigger a week or more of Starlink 4-1 launch delays. For now, though, there are no signs of a delay.

Crew-3

Prior to Starlink 4-1, SpaceX is set for its fifth astronaut launch since May 2020 and third operational NASA ‘crew rotation’ mission on Wednesday, November 10th. Crew-3 will also host the 15th through 18th astronauts launched by SpaceX, nominally sending Raja Chari, Thomas Marshburn, Kayla Barron (NASA), and Matthias Maurer (ESA) on their way to an ISS docking on November 11th.

Crew Dragon C210 and Falcon 9 B1067: Crew-3’s rides to space. (Richard Angle)
Crew-3 astronauts Matthias Maurer, Thomas Marshburn, Raja Chari, and Kayla Barron have been (mostly) ready for flight since late October. (SpaceX)

Eric Ralph is Teslarati's senior spaceflight reporter and has been covering the industry in some capacity for almost half a decade, largely spurred in 2016 by a trip to Mexico to watch Elon Musk reveal SpaceX's plans for Mars in person. Aside from spreading interest and excitement about spaceflight far and wide, his primary goal is to cover humanity's ongoing efforts to expand beyond Earth to the Moon, Mars, and elsewhere.

Advertisement
Comments

Elon Musk

Elon Musk is now a remote DOGE worker: White House Chief of Staff

The Tesla and SpaceX CEO Elon Musk is no longer working from the West Wing.

Published

on

Credit: Elon Musk/X

In a conversation with the New York Post, White House Chief of Staff Susie Wiles stated that Tesla and SpaceX CEO Elon Musk is no longer working from the West Wing.

As per the Chief of Staff, Musk is still working for DOGE—as a remote worker, at least.

Remote Musk

In her conversation with the publication, Wiles stated that she still talks with Musk. And while the CEO is now working remotely, his contributions still have the same net effect. 

“Instead of meeting with him in person, I’m talking to him on the phone, but it’s the same net effect,” Wiles stated, adding that “it really doesn’t matter much” that the CEO “hasn’t been here physically.” She also noted that Musk’s team will not be leaving.

“He’s not out of it altogether. He’s just not physically present as much as he was. The people that are doing this work are here doing good things and paying attention to the details. He’ll be stepping back a little, but he’s certainly not abandoning it. And his people are definitely not,” Wiles stated.

Advertisement

Back to Tesla

Musk has been a frequent presence in the White House during the Trump administration’s first 100 days in office. But during the Q1 2025 Tesla earnings call, Musk stated that he would be spending substantially less time with DOGE and substantially more time with Tesla. Musk did emphasize, however, that DOGE’s work is extremely valuable and critical.

“I think I’ll continue to spend a day or two per week on government matters for as long as the President would like me to do so and as long as it is useful. But starting next month, I’ll be allocating probably more of my time to Tesla and now that the major work of establishing the Department of Government Efficiency is done,” Musk stated.

Continue Reading

Elon Musk

Tariff reprieve might be ‘Tesla-friendly,’ but it’s also an encouragement to others

Tesla stands to benefit from the tariff reprieve, but it has some work cut out for it as well.

Published

on

tesla employee
(Photo: Tesla)

After Secretary of Commerce Howard Lutnick made adjustments to the automotive tariff program that was initially announced, many quickly pointed to the reprieve as “Tesla-friendly.”

While that may be the case right now, it was also a nudge of encouragement to other companies, Tesla included, to source parts from the U.S. in an effort to strengthen domestic manufacturing. Many companies are close, and it will only take a handful of improvements to save themselves from tariffs on their cars as well.

Yesterday, Sec. Lutnick confirmed that cars manufactured with at least 85 percent of domestic content will face zero tariffs. Additionally, U.S. automakers would receive credit up to 15 percent of the value of vehicles to offset the cost of imported parts.

Big Tesla win? Sec Lutnick says cars with 85% domestic content will face zero tariffs

“This is ‘finish your cars in America and you win’,” Lutnick said.

Many were quick to point out that only three vehicles currently qualify for this zero-tariff threshold: all three are Teslas.

However, according to Kelley Blue Book’s most recent study that revealed who makes the most American cars, there are a lot of vehicles that are extremely close to also qualifying for these tariff reductions.

Tesla has three vehicles that are within five percent, while Ford, Honda, Jeep, Chevrolet, GMC, and Volkswagen have many within just ten percent of the threshold.

Tesla completely dominates Kogod School’s 2024 Made in America Auto Index

It is within reach for many.

Right now, it is easy to see why some people might think this is a benefit for Tesla and Tesla only.

But it’s not, because Tesla has its Cybertruck, Model S, and Model X just a few percentage points outside of that 85 percent cutoff. They, too, will feel the effects of the broader strategy that the Trump administration is using to prioritize domestic manufacturing and employment. More building in America means more jobs for Americans.

Credit: Tesla

However, other companies that are very close to the 85 percent cutoff are only a few components away from also saving themselves the hassle of the tariffs.

Ford has the following vehicles within just five percent of the 85 percent threshold:

  • Ford Mustang GT automatic (80%)
  • Ford Mustang GT 5.0 (80%)
  • Ford Mustang GT Coupe Premium (80%)

Honda has several within ten percent:

  • Honda Passport All-Wheel-Drive (76.5%)
  • Honda Passport Trailsport (76.5)

Jeep has two cars:

  • Jeep Wrangler Rubicon (76%)
  • Jeep Wrangler Sahara (76%)

Volkswagen has one with the ID.4 AWD 82-kWh (75.5%). GMC has two at 75.5% with the Canyon AT4 Crew Cab 4WD and the Canyon Denali Crew Cab 4WD.

Chevrolet has several:

  • Chevrolet Colorado 2.7-liter (75.5%)
  • Chevrolet Colorado LT Crew Cab 2WD 2.7-liter (75.5%)
  • Chevrolet Colorado Z71 Crew Cab 4WD 2.7-liter (75.5%)

These companies are close to reaching the 85% threshold, but adjustments need to be made to work toward that number.

Anything from seats to fabric to glass can be swapped out for American-made products, making these cars more domestically sourced and thus qualifying them for the zero-tariff boundary.

Frank DuBois of American University said that manufacturers like to see stability in their relationships with suppliers and major trade partners. He said that Trump’s tariff plan could cause “a period of real instability,” but it will only be temporary.

Now is the time to push American manufacturing forward, solidifying a future with more U.S.-made vehicles and creating more domestic jobs. Tesla will also need to scramble to make adjustments to its vehicles that are below 85%.

Continue Reading

News

Tesla Cybertruck RWD production in full swing at Giga Texas

Videos of several freshly produced Cybertruck LR RWD units were shared on social media platform X.

Published

on

Credit: Joe Tegtmeyer/X

It appears that Tesla is indeed ramping the production of the Cybertruck Long Range Rear Wheel Drive (LR RWD), the most affordable variant of the brutalist all-electric pickup truck.

Videos of several freshly produced Cybertruck LR RWD units were shared on social media platform X.

Giga Texas Footage

As per longtime Tesla watcher Joe Tegtmeyer, Giga, Texas, was a hotbed of activity when he conducted his recent drone flyover. Apart from what seemed to be Cybercab castings being gathered in the complex, a good number of Cybertruck LR RWD units could also be seen in the facility’s staging area. The Cybertruck LR RWD units are quite easy to spot since they are not equipped with the motorized tonneau cover that is standard on the Cybertruck AWD and Cyberbeast.

The presence of the Cybertruck LR RWD units in Giga Texas’ staging area suggests that Tesla is ramping the production of the base all-electric pickup truck. This bodes well for the vehicle, which is still premium priced despite missing a good number of features that are standard in the Cybertruck AWD and Cyberbeast.

Cybertruck Long Range RWD Specs

The Cybertruck LR RWD is priced at $69,990 before incentives, making it $10,000 more affordable than the Cybertruck AWD. For its price, the Cybertruck Long Range RWD offers a range of 350 miles per charge if equipped with its 18” standard Wheels. It can also add up to 147 miles of range in 15 minutes using a Tesla Supercharger.

Advertisement

Much of the cost-cutting measures taken by Tesla are evident in the cabin of the Cybertruck LR RWD. This could be seen in its textile seats, standard console, seven-speaker audio system with no active noise cancellation, and lack of a 9.4” second-row display. It is also missing the motorized tonneau cover, the 2x 120V and 1x 240V power outlets on the bed, and the 2x 120V power outlets in the cabin. It is also equipped with an adaptive coil spring suspension instead of the adaptive air suspension in the Cybertruck AWD and Cyberbeast.

Continue Reading

Trending