Elon Musk
Tesla CEO Elon Musk reveals new details about Robotaxi rollout
The first Tesla Robotaxi unit was spotted in Austin earlier today, and CEO Elon Musk is revealing some cool new details.
Tesla CEO Elon Musk has revealed new details about the company’s relatively imminent rollout of the Robotaxi platform as the suspected launch date of June 12 continues to near.
Earlier today, the first video showing the first driverless Tesla Robotaxi in Austin was shared on X, just a day after the City officially listed the company as an autonomous vehicle operator on its website. Tesla is listed as a company in the “Testing” phase.
🚨 BREAKING: The first Tesla Robotaxi has been spotted in Austin!
It’s has the word “Robotaxi” inscribed on the side, and it’s very clear that there is nobody in the driver’s seat.
It does appear that someone is in the passenger’s seat. https://t.co/6BdTfd4B8p pic.twitter.com/dygWCeQ5kZ
— TESLARATI (@Teslarati) June 10, 2025
The initial details of the Robotaxi are being revealed by Musk, who is carefully releasing small tidbits that seem to show the capabilities of the entire Tesla fleet, and not necessarily just the vehicles that will be involved in the initial rollout in Austin.
First Tesla driverless robotaxi spotted in the wild in Austin, TX
His first tidbit is one that many Tesla owners and fans will already know: many Teslas are capable of this driveless performance, but Full Self-Driving is not yet refined to the point where the software is quite ready to handle it. Current versions are robust, but not prepared for driverless navigation. The hardware, however, will enable Teslas to be Robotaxis, even if they’re already purchased by owners:
These are unmodified Tesla cars coming straight from the factory, meaning that every Tesla coming out of our factories is capable of unsupervised self-driving! https://t.co/n94ln0Uas6
— Elon Musk (@elonmusk) June 10, 2025
This is one of the biggest advantages Tesla has over other vehicle makers. Simply put, the Over-the-Air software updates that will roll out to FSD users will eventually make their cars into Robotaxis as well.
However, Musk shed some details on the version of FSD that is being run in these new Robotaxis that were spotted. Musk said that the version these Robotaxis are running is a new version, but will soon “merge to main branch.”
There is also an even newer version that has four times the parameters as this newer version that the test-stage Robotaxis are using, but Musk admits that this needs significant refinement before it is released to the public.
It’s a new version of software, but will merge to main branch soon.
We have a more advanced model in alpha stage that has ~4X the params, but still requires a lot of polishing.
That’s probably ready for deploy in a few months.
— Elon Musk (@elonmusk) June 10, 2025
As of now, Tesla is simply teasing the actual launch date of the Robotaxi program, but Bloomberg reported earlier this month that it will occur on June 12.
Elon Musk
Tesla CEO Elon Musk teases insane capabilities of next major FSD update
Tesla CEO Elon Musk teased the insane capabilities of the next major Full Self-Driving update just hours after the company rolled out version 14.2 to owners.
Tesla Full Self-Driving v14.2 had some major improvements from the previous iteration of v14.1.x. We were on v14.1.7, the most advanced configuration of the v14.1 family, before Tesla transitioned us and others to v14.2.
However, Musk has said that the improvements coming in the next major update, which will be v14.3, will be where “the last big piece of the puzzle finally lands.”
14.3 is where the last big piece of the puzzle finally lands
— Elon Musk (@elonmusk) November 21, 2025
There were some major improvements with v14.2, most notably, Tesla seemed to narrow in on the triggers that caused issues with hesitation and brake stabbing in v14.1.x.
One of the most discussed issues with the past rollout was that of brake stabbing, where the vehicle would contemplate proceeding with a route as traffic was coming from other directions.
We experienced it most frequently at intersections, especially four-way stop signs.
Elon Musk hints at when Tesla can fix this FSD complaint with v14
In our review of it yesterday, it was evident that this issue had been resolved, at least to the extent that we had no issues with it in a 62-minute drive, which you can watch here.
Some owners also reported a more relaxed driver monitoring system, which is something Tesla said it was working on as it hopes to allow drivers to text during operation in the coming months. We did not test this, as laws in Pennsylvania prohibit the use of phones at any time due to the new Paul Miller’s Law, which took effect earlier this year.
However, the improvements indicate that Tesla is certainly headed toward a much more sentient FSD experience, so much so that Musk’s language seems to be more indicative of a more relaxed experience in terms of overall supervision from the driver, especially with v14.3.
Musk did not release or discuss a definitive timeline for the release of v14.3, especially as v14.2 just rolled out to Early Access Program (EAP) members yesterday. However, v14.1 rolled out to Tesla owners just a few weeks ago in late 2025. There is the potential that v14.3 could be part of the coming Holiday Update, or potentially in a release of its own before the New Year.
Elon Musk
SpaceX issues statement on Starship V3 Booster 18 anomaly
The incident unfolded during gas-system pressure testing at the company’s Massey facility in Starbase, Texas.
SpaceX has issued an initial statement about Starship Booster 18’s anomaly early Friday. The incident unfolded during gas-system pressure testing at the company’s Massey facility in Starbase, Texas.
SpaceX’s initial comment
As per SpaceX in a post on its official account on social media platform X, Booster 18 was undergoing gas system pressure tests when the anomaly happened. Despite the nature of the incident, the company emphasized that no propellant was loaded, no engines were installed, and personnel were kept at a safe distance from the booster, resulting in zero injuries.
“Booster 18 suffered an anomaly during gas system pressure testing that we were conducting in advance of structural proof testing. No propellant was on the vehicle, and engines were not yet installed. The teams need time to investigate before we are confident of the cause. No one was injured as we maintain a safe distance for personnel during this type of testing. The site remains clear and we are working plans to safely reenter the site,” SpaceX wrote in its post on X.
Incident and aftermath
Livestream footage from LabPadre showed Booster 18’s lower half crumpling around the liquid oxygen tank area at approximately 4:04 a.m. CT. Subsequent images posted by on-site observers revealed extensive deformation across the booster’s lower structure. Needless to say, spaceflight observers have noted that Booster 18 would likely be a complete loss due to its anomaly.
Booster 18 had rolled out only a day earlier and was one of the first vehicles in the Starship V3 program. The V3 series incorporates structural reinforcements and reliability upgrades intended to prepare Starship for rapid-reuse testing and eventual tower-catch operations. Elon Musk has been optimistic about Starship V3, previously noting on X that the spacecraft might be able to complete initial missions to Mars.
Elon Musk
SpaceX Starship Version 3 booster crumples in early testing
Photos of the incident’s aftermath suggest that Booster 18 will likely be retired.
SpaceX’s new Starship first-stage booster, Booster 18, suffered major damage early Friday during its first round of testing in Starbase, Texas, just one day after rolling out of the factory.
Based on videos of the incident, the lower section of the rocket booster appeared to crumple during a pressurization test. Photos of the incident’s aftermath suggest that Booster 18 will likely be retired.
Booster test failure
SpaceX began structural and propellant-system verification tests on Booster 18 Thursday night at the Massey’s Test Site, only a few miles from Starbase’s production facilities, as noted in an Ars Technica report. At 4:04 a.m. CT on Friday, a livestream from LabPadre Space captured the booster’s lower half experiencing a sudden destructive event around its liquid oxygen tank section. Post-incident images, shared on X by @StarshipGazer, showed notable deformation in the booster’s lower structure.
Neither SpaceX nor Elon Musk had commented as of Friday morning, but the vehicle’s condition suggests it is likely a complete loss. This is quite unfortunate, as Booster 18 is already part of the Starship V3 program, which includes design fixes and upgrades intended to improve reliability. While SpaceX maintains a rather rapid Starship production line in Starbase, Booster 18 was generally expected to validate the improvements implemented in the V3 program.
Tight deadlines
SpaceX needs Starship boosters and upper stages to begin demonstrating rapid reuse, tower catches, and early operational Starlink missions over the next two years. More critically, NASA’s Artemis program depends on an on-orbit refueling test in the second half of 2026, a requirement for the vehicle’s expected crewed lunar landing around 2028.
While SpaceX is known for diagnosing failures quickly and returning to testing at unmatched speed, losing the newest-generation booster at the very start of its campaign highlights the immense challenge involved in scaling Starship into a reliable, high-cadence launch system. SpaceX, however, is known for getting things done quickly, so it would not be a surprise if the company manages to figure out what happened to Booster 18 in the near future.