Connect with us

News

Tesla patent aims to make massive change to common automotive part

Detailed in US 2026/0110320 A1 and published on April 23, the patent re-engineers the humble trim clip—the small plastic fastener that secures interior panels to the vehicle’s body structure. Traditional clips are single-piece plastic parts designed for one-time installation.

Published

on

tesla roadster
Credit: Praveen Joseph/Twitter

A new Tesla patent aims to fix a common automotive item for a more peaceful ride, revolutionizing its design to remove vibrations and noise during normal operation.

Detailed in US 2026/0110320 A1 and published on April 23, the patent re-engineers the humble trim clip—the small plastic fastener that secures interior panels to the vehicle’s body structure. Traditional clips are single-piece plastic parts designed for one-time installation.

Over time, they loosen, rattle, and transmit road noise, suspension vibrations, and minor panel buzz directly into the passenger compartment. Tesla’s new design turns that ordinary item into a reusable, two-material vibration-damping system built for long-term silence.

The clip consists of four components drawn from just two material families. The pin and grommet are molded from rigid glass-fiber-reinforced nylon, giving them the strength needed to hold panels firmly in place.

Advertisement

Not a Tesla App reported on the patent.

A soft thermoplastic elastomer (TPE) is then overmolded onto the assembly in a distinctive mushroom shape that flares outward beyond the pin shaft. This soft layer does the heavy lifting for comfort: it spreads mechanical loads over a wider area and actively damps oscillations before they can reach the interior trim.

The result is a measurable reduction in noise, vibration, and harshness (NVH)—the very factors that separate a merely quiet electric vehicle from one that feels genuinely serene.

Engineers used finite-element analysis to dial in four precise forces that make the system both secure and serviceable. It takes 31 newtons to insert the grommet into the body panel and 243 newtons to pull it back out, ensuring it stays anchored during normal driving. The pin, however, slides in with only 7 newtons and releases at 152 newtons, the patent says.

Advertisement

Because the grommet grips the sheet metal far more tightly than the pin grips the grommet, technicians can pop the trim panel off, service wiring or components behind it, and snap everything back together without disturbing the grommet or degrading the soft overmold.

The clip survives repeated service cycles with no measurable loss of damping performance.

For drivers, the payoff is a noticeably more peaceful ride. Road rumble, panel flutter, and high-frequency buzz that often sneak into luxury cabins are absorbed at the source rather than conducted through rigid plastic. Over the life of the vehicle, the reusable design also prevents the gradual loosening that causes rattles in conventional clips. Fewer replacements mean less cabin noise from degraded parts and lower long-term maintenance costs.

Tesla’s patent shows how even the smallest hardware decisions affect the overall driving experience. By giving a mundane trim clip two distinct personalities—rigid where strength is needed, soft where silence matters—the company is quietly engineering away one more source of distraction.

Advertisement

If the design reaches production, future Tesla owners could enjoy an even calmer, more refined interior without ever noticing the clever little clips holding it all together.

Joey has been a journalist covering electric mobility at TESLARATI since August 2019. In his spare time, Joey is playing golf, watching MMA, or cheering on any of his favorite sports teams, including the Baltimore Ravens and Orioles, Miami Heat, Washington Capitals, and Penn State Nittany Lions. You can get in touch with joey at joey@teslarati.com. He is also on X @KlenderJoey. If you're looking for great Tesla accessories, check out shop.teslarati.com

Advertisement
Comments

News

Tesla looks keen to bring larger Model Y L to the U.S.

Published

on

Credit: Tesla

Tesla launched the slightly larger Model Y L in China last year, and it became a hit in no time. The longer wheelbase, larger interior, and slightly more forgiving legroom area in the Model Y L became a sought-after possibility for U.S. buyers, who have been begging the company for a larger SUV.

Now, Tesla needs it more than ever, especially considering the Model X was discontinued alongside its Model S sibling earlier this year. It looks to be more likely than ever, and based on recent reports, it will fall in line with CEO Elon Musk’s prediction that it would arrive in the United States in late 2026.

Recent reports from Forbes and Not a Tesla App both have indicated Tesla plans to bring the Model Y L to the U.S. this year. The reports cite “credible sources,” and an analyst from AutoForecast Solutions named Sam Fiorani stated that the car would enter production later this year.

Fiorani said:

Advertisement

“China, Australia, and India are supplied by the factory in China, which will not supply vehicles to the U.S. Production of the Model Y L is expected to begin in the U.S. in September, which will lead to sales beginning before the end of 2026.”

Production would take place at Gigafactory Texas.

Additionally, a few Model Y L units have been spotted under wraps in the United States, giving more indication that Tesla plans to bring the vehicle to the U.S. When Tesla is close to launching a vehicle in the U.S., it is not uncommon to see these models with the exact car covers that you see below:

It makes sense, especially considering Musk hinted the Model Y L would make it to the U.S. in late 2026, but it was up in the air. The CEO said the advent of self-driving might not warrant a larger SUV coming to the U.S. market specifically.

The problem is, consumers do not want to hear that. They love Tesla’s tech, FSD, and other features, but they need more space for growing families. The Model X is gone, and the most anyone can fit in a Tesla right now is seven people in the seven-seat Model Y. That back row is truly only large enough to fit small children comfortably.

Tesla fans have requested a full-size SUV, and the company has made some hints that it could be in the plans.

Advertisement

The Model Y and Model Y L differ noticeably in size, with the Model Y L being a stretched, six-seat variant designed for great interior room. The Standard Model Y measures approximately 4,790mm in length, 1,982 mm in width with the mirrors folded, 1,624mm in height, and 2,890mm in wheel base.

In contrast, the Model Y L extends to be about 4,969–4,976mm long (roughly 179mm or 7 inches longer), stands 1,668mm tall (+44mm), and features a significantly longer 3,040 mm wheelbase (+150mm), while maintaining the same width.

This elongation primarily benefits rear passenger space and enables a 2+2+2 seating layout with captain’s chairs, though it slightly reduces maximum cargo capacity behind the rearmost seats and adds a bit of overall mass and turning radius. The result is a more spacious family hauler that still shares the core footprint and agile character of the original Model Y.

Advertisement
Continue Reading

News

One of Tesla’s biggest threats just got banned in the U.S.

Published

on

In a major development that will inevitably strengthen Tesla’s dominant position in the American EV market, Polestar has been effectively banned from selling new vehicles in the United States, starting with the 2027 model year.

The U.S. Department of Commerce denied Polestar authorization under the Connected Vehicle Rule, which prohibits vehicles containing certain connected technologies (Cellular, Wi-Fi, Bluetooth, etc.) linked to China or Russia due to national security risks, including potential data collection on American drivers.

Polestar, which is majority-owned by China’s Geely Holding, could not obtain the required exemption despite producing some models domestically.

Polestar confirmed it will sell off any remaining inventory of the Polestar 3 and Polestar 4 models, while continuing service and warranty support for existing customers. No new models or major refreshes will reach U.S. buyers, and the company is pivoting its growth strategy to Europe, where it already generates the vast majority of its sales.

Advertisement

The outcome removes a direct premium EV competitor that had positioned itself as a stylish, performance-oriented alternative to Tesla’s lineup. The Polestar 2 challenged the Model 3, while the Polestar 3 and 4 targeted segments overlapping with the Model Y and upcoming Tesla offerings. Polestar’s U.S. sales had already been sluggish amid intense competition and slower demand, representing just 6 percent of its global volume in the first quarter of 2026.

While Polestar was not on Tesla’s level in the U.S., it still places a dent in the evergrowing field of Tesla competitors in the country, where it has long dominated EV sales.

Tesla faces none of these hurdles. As a U.S.-founded and U.S.-headquartered company with major manufacturing in Fremont, Austin, and Nevada, Tesla’s vehicles are built with compliant domestic and allied supply chains. Its Full Self-Driving technology, over-the-air software updates, and vertically integrated ecosystem were developed entirely in-house without foreign ownership entanglements that trigger national security reviews, at least in the U.S.

Of course, it did face a similar threat in China a few years back:

Advertisement

Elon Musk responds to reports of Tesla ban among China’s military over security concerns

The Connected Vehicle Rule, first advanced under the prior administration and upheld under the current one, is part of a broader U.S. effort to protect the domestic auto industry and critical technology from Chinese influence. High tariffs on Chinese-made EVs and related restrictions have already reshaped the market. Tesla benefits directly: it avoids these barriers while continuing to lead in U.S. EV sales volume, Supercharger network expansion, and energy storage integration.

By clearing Polestar from the new-vehicle playing field, the policy reduces competitive pressure in the premium and performance EV segments where Tesla has invested billions. American consumers seeking cutting-edge electric vehicles now have one fewer option tied to foreign adversaries — and one clearer path to the market leader that has driven the EV transition from the start.

For Tesla, this is more than regulatory relief. It is a strategic tailwind that reinforces its position as America’s premier EV innovator at a time when domestic manufacturing and technological independence matter most.

Advertisement
Continue Reading

News

Tesla Cybercab stands to gain from new Trump autonomy rules

Published

on

Credit: Teslarati

Tesla Cybercab stands to gain from new rules that the Trump Administration is aiming to enforce on autonomous vehicles. On Thursday, NHTSA, under the Trump Administration’s U.S. Department of Transportation, commenced rulemaking on the Federal Motor Vehicle Safety Standards (FMVSS).

This effort aims to eliminate the mandate for manual brake pedals in vehicles that are designed to be driven exclusively by automated driving systems. This would impact the Tesla Cybercab, which the company has stated would operate without a steering wheel or pedals.

Tesla Cybercab launch is imminent after latest sighting at Giga Texas

The Trump Administration is looking to revise FMVSS No. 135, which requires standard braking systems on light-duty vehicles.

Advertisement

Currently, the regulation requires light-duty cars to use traditional manual braking systems that allow operators to slow the vehicle. With the advent of self-driving in the U.S., these regulations need updating, and these are the changes that could come to FMVSS No. 135:

  • Removes requirements for hand- or foot-operated brake controls for vehicles designed never to be operated by a human. Existing rules still apply to AVs that retain manual controls.
  • All subject vehicles must still meet the same stopping distance performance criteria via alternative testing procedures.
  • While this update ensures AVs can physically stop when commanded, NHTSA is separately developing safety performance requirements for AVs in real-world driving scenarios.
  • NHTSA will continue to use its broad defect enforcement authority to investigate unsafe ADS behavior and oversee recalls.

As autonomy becomes a greater part of passenger travel, these types of rule adjustments will be more than reasonable. It will give manufacturers the ability to self-certify their vehicles and avoid any red tape that could ultimately delay the deployment of these vehicles.

Administrators are also incredibly excited about the opportunity to play a role in the advancement of self-driving vehicles.

“We are at the cusp of the greatest technological revolution in vehicle technology since the innovation of the Model T,” NHTSA Administrator Jonathan Morrison said. “If we want America to lead the way, we have to reimagine our regulatory framework. That’s why under Secretary Sean Duffy’s AV Framework, NHTSA is tearing down pointless barriers to innovative designs while strengthening the fundamental safety requirements that matter and holding AV developers accountable for safe performance.”

The Cybercab entered mass production at Gigafactory Texas in April. Tesla ultimately plans to push the vehicle into its Robotaxi fleet, potentially when frameworks like these are established.

Advertisement
Continue Reading