Connect with us
a starlink dish a starlink dish

News

Starlink to be used in 2025 elections in the Philippines

(Credit: Starlink/X)

Published

on

The Philippines’ Commission on Elections (COMELEC) will use SpaceX’s Starlink internet services during the upcoming 2025 midterm elections. 

“Our instructions from the Information Technology Department (ITD) and Project Management Office (PMO) [are] we have to adopt the highest quality standard because we deserve no less,” commented COMELEC Chairman George Erwin. 

According to COMELEC spokesperson John Rex Laudiangco, Starlink services will be used to report results in “far-flung” areas of the Philippines, where internet signal is an issue. 

On Wednesday, September 11, 2024, COMELEC started conducting hardware accepted tests (HAT) on Starlink terminals and automated counting machines (ACMs) for the election. 

“The conduct of the HAT is for quality assurance purposes, as the COMELEC will not formally accept a machine if any of its parts fail the test, and MIRU is under obligation to repair, replace the defective parts or machines,” stated Laudiangco.

The COMELEC spokesperson shared that 80 Starlink terminals have successfully completed HAT tests. The Philippines will test 2,000 Starlink terminals out of 7,000 units expected to be delivered by iONE. 

The 2025 midterm elections in the Philippines is expected to have at least 500,000 candidates running for over 18,000 national and local posts. 

Advertisement
-

The Philippines’ trust in Elon Musk’s Starlink services starkly contrasts Brazil, where the internet provider has received sanctions. In Brazil, Starlink has been caught in a disagreement over X.

If you have any tips, contact me at maria@teslarati.com or via X @Writer_01001101.

Maria--aka "M"-- is an experienced writer and book editor. She's written about several topics including health, tech, and politics. As a book editor, she's worked with authors who write Sci-Fi, Romance, and Dark Fantasy. M loves hearing from TESLARATI readers. If you have any tips or article ideas, contact her at maria@teslarati.com or via X, @Writer_01001101.

Advertisement
Comments

Cybertruck

Tesla Cybertruck engineer reveals new changes in ‘constantly evolving’ pickup

Published

on

Credit: Joe Tegtmeyer | YouTube

Tesla Cybertruck Lead Engineer Wes Morrill revealed the company has made several changes to the all-electric pickup, which he calls a “living thing, constantly evolving and improving.”

Cybertruck is manufactured at Tesla’s Gigafactory Texas just outside of Austin, and over the past few years, Tesla has continued to make small changes to the pickup to improve everything from cost, reliability, serviceablility, and manufacturability.

“The finish line isn’t getting to production. A product is a living thing, constantly evolving and improving,” Morrill added.

RELATED:

Tesla Cybertruck AWD is a steal at $60k, is it still at $75k? Full Review

Some of those changes are yet to be revealed, but perhaps the most notable one was the change Tesla made to the aero shield that sits underneath the truck. In the past, it was aluminum, but now the Cybertruck is using a self-reinforcing polypropylene.

Morrill said that the polypropylene is “stretched into fibers and then laminated into the form,” and is much more durable, much lighter, and significantly cheaper than aluminum when it is manufactured this way.

It also enabled some improvements in the geometry of the Cybertruck, improving the manufacturing around the bolts and edges, in addition to minor form changes. These all benefitted the Cybertruck in more ways than one: specifically with durability and improved drag.

Typically, Teslas are not necessarily identified by model year because these changes are fluid and occur when the company sees fit to implement them. It is not like other automotive companies, which usually make sweeping manufacturing changes when building a new model year.

Instead, Teslas are recognized by their “generation” or “era.” For example, those with a newer Model Y might refer to their car as a “Juniper.” This is the same with Model 3, as many refer to the new body style as the “Highland.”

Tesla’s manufacturing changes are proof of the company’s constant need to improve its products and move things forward with its vehicles. There is no need to drag one’s feet and wait until next year if the product can be made better right now, and that’s precisely what Tesla did with the Cybertruck.

Continue Reading

Elon Musk

Tesla Cybercabs narrowly miss deadly Amazon cargo plane crash

An Amazon cargo plane crash near Miami’s airport stopped feet from dozens of Tesla Cybercabs.

Published

on

By

Photorealistic depiction of the Amazon Prime plane crash in Miami on Sep 3, 2026 near a fleet of Tesla Cybercab
Photorealistic depiction of the Amazon Prime plane crash in Miami on Sep 3, 2026 near a fleet of Tesla Cybercab

An Amazon Prime Air Boeing 767 cargo jet overran the runway at Miami International Airport on Sunday afternoon, killing five people and injuring five more. The jet, operated by North Carolina based carrier 21 Air as Flight 7598, touched down around 2 p.m. after arriving from San Juan, Puerto Rico, then crossed the airport perimeter, plowed across NW 67th Avenue and struck multiple vehicles before catching fire, according to the Associated Press.

Photos and video from the scene show the aircraft’s nose stopped within meters of a fenced staging lot holding dozens of gold painted Tesla Cybercabs, the steering wheel free robotaxi Tesla began putting on public roads in Austin last week. Miami-Dade Fire Rescue has confirmed the plane struck “multiple vehicles” but has not said whether any Cybercabs were among them, and neither Tesla nor airport officials have addressed the fleet directly.

The Cybercabs had not yet entered commercial service in Miami. Tesla’s existing Robotaxi operation there runs on modified Model Y vehicles and has been unsupervised since Ashok Elluswamy confirmed the detail on X in July.


Elon Musk offered the briefest of reactions. Replying to a Zero Hedge post about the Cybercabs sitting so close to the wreckage, he wrote a single word: “Weird.” He has not commented further, and Tesla has not issued a statement.

The timing puts Tesla’s newest vehicle near an unrelated but highly visible tragedy just days after its Austin debut, a launch that had already drawn scrutiny from federal regulators. The National Highway Traffic Safety Administration opened an audit how Tesla certified the Cybercab as compliant with federal vehicle safety standards, a process Teslarati covered after the vehicle’s September 3 launch event. That inquiry concerns the car’s lack of a steering wheel and pedals, not the Miami crash.

Investigators from the FAA and NTSB are focused on the plane, not the parking lot beside it. Flight data reviewed by outlets including Simple Flying show the 767 touched down around 170 knots, well above the 135 to 140 knot range typical for the aircraft, though investigators have not determined a cause. Amazon said it is working with authorities and that its priority is the safety of everyone affected.

Whether any Cybercabs were damaged, and what Tesla plans for the fleet parked near one of the country’s busiest airports, remain open questions.

Continue Reading

News

Tesla crosses major Unsupervised Self-Driving milestone

Published

on

Credit: Tesla

Tesla has reached a notable benchmark in its autonomous driving program after its Robotaxi fleet surpassed one million miles of unsupervised operation. The company made the announcement during its Cybercab event in Austin on September 3.

Tesla Vice President of AI Ashok Elluswamy told attendees he was happy to report the fleet had achieved one million miles of unsupervised Robotaxi operation as a testament to safety.

The new total marked a sharp increase from the 380,000 unsupervised miles Tesla disclosed during its second-quarter 2026 earnings update in late July.

In roughly six weeks, the company added about 620,000 miles. That acceleration followed Tesla’s decision to remove in-vehicle safety monitors from most of its operations outside the San Francisco Bay Area.

Credit: Tesla

Tesla first launched Robotaxi service in Austin in June 2025 with safety drivers present. It later began fully unsupervised rides and expanded into Dallas, Houston, Miami, Orlando, and Tampa. The San Francisco Bay Area remains the exception, where a safety monitor still rides in the vehicle under California permitting rules.

The company has not released a city-by-city breakdown of the one million unsupervised miles.

The milestone arrived as Tesla began offering public Cybercab rides in Austin. The purpose-built vehicle has no steering wheel or pedals and is designed only for autonomous ride-hailing. Production versions joined the existing fleet of modified Tesla vehicles already operating in the service.

Tesla’s unsupervised mileage is growing at a double-digit weekly rate according to earlier company comments, yet its fleet size remains modest compared with established competitors. Waymo has accumulated more than 200 million fully autonomous rider-only miles. Tesla has described its own unsupervised operations as having recorded zero notable incidents in the period leading up to the July update.

The one-million-mile figure reflects Tesla’s shift from supervised testing to broader driverless service in multiple states. It also highlights the company’s strategy of using both existing Model Y vehicles and the new Cybercab to scale its network.

Credit: Tesla

Whether the rapid recent growth continues will depend on further city expansions, regulatory approvals, and the performance of the purpose-built Cybercab in everyday paid rides. Tesla has not specified how many of the latest miles involved the new vehicle versus the rest of the fleet.

The announcement underscores Tesla’s progress toward a larger robotaxi network while illustrating the remaining gap in total autonomous experience relative to longer-operating rivals.

Continue Reading