Connect with us

News

Tesla Cybercab production ignites with 60 units spotted at Giga Texas

Designed exclusively for unsupervised Full Self-Driving, the Cybercab promises to deliver safe, affordable, on-demand mobility without human drivers. Early units with temporary controls allow engineers to refine hardware and software in controlled settings before full autonomous fleets hit the roads.

Published

on

Credit: Joe Tegtmeyer

Tesla Cybercab production at Giga Texas seems to have ignited, as 60 units were spotted outside of the production facility on Wednesday, with speculation hinting the all-electric ride-hailing vehicle could be headed to the lineup sooner rather than later.

Interestingly, they were also spotted with steering wheels, which Tesla said the car would be void of.

Giga Texas observer and drone operator Joe Tegtmeyer shared on X a new post that revealed approximately 60 Cybercabs parked in two organized groups in the factory’s outbound lot—the largest concentration observed to date.

Advertisement
-

Tegtmeyer noted white seats inside several vehicles and clearly visible steering wheels on most. These are not yet the final steering-wheel-free production versions unveiled in 2024, but early units are likely undergoing validation testing for new features and real-world robotaxi operations across the country.

The timing could not be more symbolic. Tesla has consistently affirmed that mass manufacturing of the Cybercab would begin this month.

CEO Elon Musk has reiterated the April 2026 target multiple times, emphasizing that while initial output will be slow, following the classic S-curve of new-vehicle ramps, the Giga Texas line is being prepared to produce hundreds of units per week.

Tesla CEO Elon Musk outlines expectations for Cybercab production

The first Cybercab already rolled off the line in February, but April marks the official shift to volume production of this purpose-built, pedal- and steering-wheel-free autonomous vehicle.

These 60 Cybercabs signal far more than parked prototypes. They represent tangible proof that Tesla is executing on its ambitious robotaxi roadmap.

Advertisement
-

Designed exclusively for unsupervised Full Self-Driving, the Cybercab promises to deliver safe, affordable, on-demand mobility without human drivers. Early units with temporary controls allow engineers to refine hardware and software in controlled settings before full autonomous fleets hit the roads.

As production scales, Giga Texas, already home to Cybertruck production, will become the epicenter of Tesla’s autonomous revolution, targeting millions of vehicles annually in the years ahead.

For Tesla and its investors, this sighting underscores manufacturing excellence and timeline discipline. It counters skepticism about the company’s ability to deliver on next-generation vehicles amid a competitive autonomous landscape.

Broader implications are profound: lower transportation costs, reduced emissions, and safer roads as robotaxis proliferate. Musk’s vision of a future where Cybercabs operate 24/7, generating revenue for owners and riders alike, is now visibly underway.

With mass production officially ramping in April, today’s images are not just a snapshot of parked vehicles; they are the first frames of a mobility transformation. Tesla is not only meeting its commitments; it is accelerating toward an era where autonomy reshapes daily life. The Cybercab era has begun.

Advertisement
-

Joey has been a journalist covering electric mobility at TESLARATI since August 2019. In his spare time, Joey is playing golf, watching MMA, or cheering on any of his favorite sports teams, including the Baltimore Ravens and Orioles, Miami Heat, Washington Capitals, and Penn State Nittany Lions. You can get in touch with joey at joey@teslarati.com. He is also on X @KlenderJoey. If you're looking for great Tesla accessories, check out shop.teslarati.com

Advertisement
Comments

Elon Musk

Tesla gears up Cybercab with Starlink for public debut, but with notable changes

Published

on

Credit: Joe Tegtmeyer | X

Tesla is gearing up Cybercab, its all-electric and fully autonomous ride-hailing vehicle, for a very public debut as it plans to start customer deliveries in December. However, the units that rolled out of Gigafactory Texas this morning seem to differ from what we have seen previously.

Aerial images captured by drone photographer Joe Tegtmeyer at Giga Texas on November 18 reveal a noticeable update to the appearance of Tesla’s Cybercabs equipped with Starlink. Rows of gold production vehicles sit in the outbound lot, each carrying a flush-mounted Starlink V5 terminal on the rear hatch that looks more refined than the version first shown months earlier.

When Tesla first unveiled the integration in July and displayed a physical example in August, the Starlink hardware appeared as a relatively distinct rectangular panel on the hatch. Later September footage of large numbers of Cybercabs leaving the factory still showed a lighter, more obvious rectangular cover that roughly matched the vehicle’s gold paint:

Images via Joe Tegtmeyer

The newest batch stands out for how cleanly the cover blends into the roof’s character lines. Observers and replies to Tegtmeyer’s post describe the result as tighter and more intentional, sitting flush and following the body contours rather than reading as an added panel.

All of the Cybercabs in the latest images also wear prominent “Cybercab” logos on the doors and rear hatch, confirming these are finished production units rather than early prototypes. They are staged near the factory building, end-of-line areas, and covered transport trailers, with some already lined up for shipment.

The scale and consistency of the installation point to factory tooling rather than retrofit work.

A secondary detail noted in related sightings is a darker tone to the Starlink cover compared with earlier lighter panels. Tegtmeyer himself left open whether the darker finish is deliberate. There are a variety of explanations for it: perhaps for thermal performance, signal characteristics, or simple visual identification—or simply a batch variation still being refined.

Advertisement
-

Either way, the overall effect is a more integrated, production-ready appearance. For a Robotaxi that relies on Starlink for fleet connectivity, passenger services, and backup data links in areas with weak cellular coverage, the cleaner hatch design is more than cosmetic.

It signals that Tesla is polishing the final visual and hardware details as Cybercab volumes continue to climb at Giga Texas ahead of broader Robotaxi deployment. The vehicles now look to be built with Starlink instead of it being added afterward.

Continue Reading

Elon Musk

Tesla’s Powercore could change how data centers get power

Tesla unveiled Powercore, a solid-state transformer that could ease one of the grid’s worst bottlenecks.

Published

on

By

Tesla has unveiled Powercore, a solid-state medium voltage transformer that also handles the jobs of an inverter and a circuit breaker in a single unit. “Solid state medium voltage transformer, inverter and breaker – reliable, safe and secure,” the company’s Tesla Megapack account posted on X Tuesday, adding that the product is “Made in America” and will be “Operating 2027.” Elon Musk followed with his own post: “Advanced solid state transformers at scale from Tesla.”

Tesla rates Powercore at 7.4 MW, or 9 MVA, of continuous output at 34.5 kV AC, with grid-forming support for 10 MVA of peak power. Specs shared by Sawyer Merritt list a peak efficiency of 98.86 percent, a DC range of 800 to 2,000 volts and a built-in solid-state breaker that clears faults in about 100 microseconds. Tesla has not announced pricing, a factory location or a first customer.

The product fills a gap Tesla left open last year. When it introduced Megapack 3 and Megablock in September 2025, Tesla said it would build its own transformers, but shared almost nothing about them. Megablock groups four Megapack 3 units with a transformer and switchgear into a single medium voltage block, as Teslarati reported. Powercore appears to be that missing piece.

A typical battery or solar project today uses low voltage inverters to turn DC into AC, then a large oil-filled transformer to step that power up to grid voltage. A solid-state unit handles both steps with power electronics, which means less equipment, a smaller footprint and no flammable oil. Grid-forming capability lets it actively help hold voltage and frequency steady rather than simply following the grid.

Advertisement
-

Timing is a big part of the pitch. Lead times for conventional transformers have stretched into years as AI data centers and renewable projects crowd utility interconnection queues. Tesla energy executive Max de Zegher pointed to the problem in a post Musk shared, noting that “transformers have barely changed since the 1890s: copper coils in a tank of oil,” while batteries, solar and compute all run on DC. Powercore, he wrote, delivers “one conversion and about half the losses.” Tesla has also said its Megapack supply for 2027 is nearly sold out.

Tesla deployed 13.7 GWh of energy storage in the third quarter, its second best quarter on record. On Tuesday, the company also said customer solar systems deployed by Tesla Energy now generate more than twice the electricity its global operations consume each year.

Continue Reading

News

Tesla changes vehicle computers from ‘AI’ to ‘SI,’ reflecting President Trump change

Published

on

Tesla has officially changed the reference to its vehicles’ internal computers to “Super Intelligence,” or “SI,” reflecting a change that President Donald Trump made when he noted it would no longer be referred to as “Artificial Intelligence,” or “AI.”

Tesla hacker Green posted that a breakdown of Software Version 2026.44.1, noting that the in-car computer is now labeled as “SI Computer,” in system properties:

In September as he spoke at the UN’s General Assembly, President Trump said (via The Verge):

“The United States also totally rejects any attempt to construct a globalist scheme to control for the artificial intelligence being spoken of so much now. Here and after officially called “super intelligence,” changing the name, and that the use of the word artificial makes intelligence fake. It makes it sound fake, and it is not fake. It’s actually amazing. But we have to be careful. In fact, it is exactly the opposite of what it purports. From this point forward, all of the United States documents, and hopefully the world’s, will be changed to use the much more accurate term, super as opposed to artificial. So it’s super intelligence. In other words, welcome to the new world of super intelligence — SI. That’s, uh, let’s see if that does. It sounds much better. It is much better, and it’s much more accurate.”

Tesla and Musk have evidently chosen to adopt the change, as it now appears as an official reference to the company’s in-car computer.

Tesla has long used iterative software updates to refine Autopilot/FSD behavior, vehicle controls, and user interfaces. Renaming an internal identifier fits that pattern of quiet housekeeping far more closely than a sudden capability jump.

Owners on HW3 and later hardware continue to receive the same incremental FSD improvements seen in prior releases, as the property string does not alter compute allocation or model architecture.

Nevertheless, this won’t have any impact on the vehicles themselves, but it is more of an adoption of terms.

Continue Reading