Connect with us

News

Tesla has to fix a big problem with its old headlights, NHTSA says

Published

on

tesla model 3 first generation headlight
Credit: Tesla Asia/Twitter

Tesla had a petition protesting a recall to fix a potential issue with 2017-2023 Model Y and Model 3 vehicles’ headlights was denied, as the National Highway Traffic Safety Administration (NHTSA) disagreed with the company’s opinion of things.

The recall covers approximately 19,917 Model Y and Model 3 vehicles built from 2017 to 2023. Tesla initially submitted a noncompliance report for the headlights on these vehicles on March 15, 2024. Tesla then petitioned for an exemption from the fix, which violated FMVSS No. 108 (40 CFR 571.108), arguing that the “noncompliance is inconsequential as it relates to motor vehicle safety.

The NHTSA disagreed, stating that Tesla’s conclusion that the headlights do not increase any risk was not an opinion it shared. The agency said it disagreed with Tesla’s assumption that glare is not increased to surrounding traffic. This issue could be highlighted even more in certain weather conditions.

Advertisement
-

Tesla will be required to remedy the issue, the NHTSA ruled:

“In consideration of the foregoing, NHTSA has decided that Tesla has not met its burden of persuasion that the subject FMVSS No. 108 noncompliance is inconsequential to motor vehicle safety. Accordingly, Tesla’s petition is hereby denied, and Tesla is consequently obligated to provide notification of and free remedy for that noncompliance under 49 U.S.C. 30118 and 30120.”

The issue here appears to be the angle of the headlights and the brightness they emit during operation. The NHTSA report states that:

“Tesla’s headlamp supplier, Marelli Automotive Lighting, tested 25 right-hand and 25 left-hand lamps, and for this sample, found the maximum photometric intensity measured in the 10°U to 90°U and 90°L to 90°R zone was between 136.2 cd and 230.1 cd for the right-hand lamps and between 117.5 cd and 160.3 cd for the left-hand lamps. According to Tesla, these tests revealed that the photometric intensity of the right-hand and left-hand headlamp lower beam on the subject vehicles may measure as much as 230.1 cd in the 10°U to 90°U and 90°L to 90°R zone, exceeding the maximum photometric intensity by 105.1 cd. Additionally, Tesla states that a left-hand lamp tested by a Transport Canada recognized laboratory measured a maximum of 171.27 cd in the 10°U to 90°U and 90°L to 90°R zone. Despite these measurements exceeding the allowed photometric maximum of 125 cd, Tesla believes that the subject noncompliance is inconsequential to motor vehicle safety.”

Tesla also argued at some points that the headlights had not been deemed responsible for any complaints, accidents, or injuries related to the noncompliance.

Advertisement
-

Joey has been a journalist covering electric mobility at TESLARATI since August 2019. In his spare time, Joey is playing golf, watching MMA, or cheering on any of his favorite sports teams, including the Baltimore Ravens and Orioles, Miami Heat, Washington Capitals, and Penn State Nittany Lions. You can get in touch with joey at joey@teslarati.com. He is also on X @KlenderJoey. If you're looking for great Tesla accessories, check out shop.teslarati.com

Advertisement
Comments

Elon Musk

How SpaceX Is raising Raptor’s sea-level thrust while holding engine mass steady

Published

on

Credit: SpaceX

SpaceX’s Raptor engine family has steadily increased sea-level thrust while simultaneously reducing mass, turning iterative engineering gains into substantially higher performance for the Super Heavy booster. CEO Elon Musk shed more light on how powerful Raptor 4 will be, and it’s pretty crazy.

Raptor 1 delivered 185 metric tons of thrust at roughly 2,080 kilograms, while Raptor 2 raised that to 230 tons while cutting mass to about 1,630 kilograms. SpaceX data for Raptor 3 lists a target of 280 tons at 1,525 kilograms (with further reductions in associated vehicle hardware), while operational flight ratings have been cited near 250 tons.

This morning, Elon Musk stated that Raptor 4 is expected to reach 300 tons of sea-level thrust at roughly the same mass as Raptor 3. Across these versions, thrust has risen by more than 60 percent from the first engines while engine mass has fallen, producing a sharp improvement in thrust-to-weight ratio. This is a true testament to how great SpaceX engineering has been:

With 33 engines on SuperHeavy, the jump from earlier versions to a 300-ton Raptor 4 would produce roughly 9,900 metric tons of total liftoff thrust, nearly three times the Saturn V’s approximately 3,400 metric tons from its five F-1 engines.

This is not just a larger number on a data sheet, either, as sea-level thrust is the force available the moment the vehicle leaves the pad. This is when it is heaviest and still deep in Earth’s gravity well and dense atmosphere.

Higher levels of sea-level thrust directly improves the initial thrust-to-weight ratio of the full stack. A higher ratio produces faster acceleration off the pad, which shortens the time the rocket has to spend fighting gravity, and gravity losses during the first minute or two of the flight are a major drain on total available delta-v. Every second shaved off of that early climb preserves more propellant energy for reaching orbital velocity or for carrying extra payload.

Because Super Heavy’s engine count is constrained by vehicle diameter and packing density, increasing thrust per engine is the most straightforward way to raise total liftoff performance without redesigning the booster structure or design.

The same-mass target for Raptor 4 is equally important. Holding engine mass roughly constant while raising thrust improves the engine’s own thrust-to-weight ratio and reduces the structural and propellant mass fraction that must be carried solely to support the engines.

Advertisement
-

Earlier Raptor iterations also simplified or eliminated extensive vehicle-side hardware such as heat shields. These gains compound: more force for less installed mass leaves additional capacity for propellant, payload, or operational margins such as engine-out capability.

For Starship’s architecture, the practical effects are large. Greater liftoff thrust supports heavier vehicles, larger propellant loads, and higher payloads to low Earth orbit, figures SpaceX has targeted in the 100-plus-ton reusable range. That capacity underpins orbital refueling, lunar missions, and eventual Mars cargo and crew flights.

Continued growth in sea-level thrust therefore tightens the gap between theoretical rocket performance and the high flight rates and reusability needed to make large-scale space transport practical.

Continue Reading

News

Tesla Assisted Driving expands to tenth EU country

Published

on

Tesla has expanded its Tesla Assisted Driving (TAD) suite to its tenth European country, as Latvia joined a growing list of European Union member states authorizing the company’s advanced driver assistance technology.

Tesla Europe announced this morning that the system is now approved in Latvia, with a software rollout to begin soon.

The approval and rollout follow recognition of a provisional European type approval originally granted by the Netherlands’ RDW authority on April 10.

Latvia’s Road Traffic Safety Directorate (CSDD) evaluated the Dutch documentation, coordinated with the other national authorities, and reviewed updates from Tesla. These included tightened limits on speed offsets, automatic resets of any manual speed adjustments after each trip, and stronger driver monitoring.

In Europe, the feature is marketed as Tesla Assisted Driving after a recent rule change that labeled the name “Full Self-Driving” as misleading.

Tesla starts showing how FSD will change lives in Europe

The system remains an SAE Level 2 driver assistance tool, not unsupervised autonomy. It can control speed, steering, braking, lane changes, and intersections while following a navigation route. Drivers need not keep their hands on the wheel at all times, yet they must continuously monitor the road and be prepared to intervene immediately.

The sequence of EU recognitions began with the Netherlands in April and continued through Lithuania, Estonia, Denmark, Belgium, Slovenia, Czechia, Croatia, and Slovakia. Most have relied on mutual recognition of the single Dutch provisional approval rather than independent national testing.

Advertisement
-

These national clearances do not yet constitute bloc-wide authorization. An EU-wide decision requires a qualified majority in the Technical Committee on Motor Vehicles: at least 15 of 27 member states representing 65 percent of the EU population. Larger markets, like Germany, France, and Italy, remain under review, and a vote is expected this December.

However, for Latvian Tesla owners with compatible vehicles and software, the imminent rollout expands access to the supervised system while underscoring that attentive human oversight remains essential.

Continue Reading

News

Tesla expands Robotaxi geofence in Houston with an ode to SpaceX merger

Published

on

Tesla expanded its Robotaxi geofence in Houston, Texas, today, enlarging the service area and drawing a new rocket-shaped boundary across the city’s northwestern and central parts.

Although CEO Elon Musk said it was just a coincidence, the expansion seems to be an ode to SpaceX and its potential merger with Tesla.

The official Tesla Robotaxi account announced the change with the lines “Houston, we have liftoff” and “Bigger service area now live,” pairing them with a map overlay.

Advertisement
-

The prior white geofence, roughly 25 square miles covering Jersey Village, Harvest Bend, and the Willowbrook corridor along U.S. 290 and State Highway 249, now sits inside a larger blue zone that stretches southeast toward Bellair and closer to central Houston.

Houston’s Robotaxi service launched on April 18, 2026, the same day as Dallas, as Tesla’s first unsupervised public expansion beyond Austin. From the start, the vehicles were Model Ys running without anyone in the front seats, booked through the dedicated Tesla Robotaxi app and open to the public inside the geofence.

Trackers measured the initial zone at about 25 square miles; by late September it had not grown substantially. Community and registry data indicated a modest local fleet of unsupervised Model Ys, while dozens to nearly 200 Cybercabs, the purpose-built, steering-wheel-free two-seaters, have been spotted staging and testing in Houston lots, though public Cybercab rides remain limited to Austin for now.

Across the broader Robotaxi program, Tesla began public Robotaxi rides in Austin in June 2025, as a small geofence and vehicles with safety monitors became available for a ride-hailing service. Later on, Tesla removed the monitors and steadily expanded the service area until it covered most of the Austin metro area.

Unsupervised Robotaxi services now run in six cities: Austin, Dallas, Houston, Miami, Orlando, and Tampa. Cumulative driverless miles reported by the company have reached several million. The Cybercab entered public service in Austin in early September 2026 and has scaled rapidly there. The company has also said that Dallas is next for Cybercab rides in November, with further cities and 24/7 hours targeted by year-end, plus fleet-operator sales of the vehicle.

Waymo also operates a fully driverless service in Houston, which has been open to the public since August of this year.

Advertisement
-

The Houston expansion continues Tesla’s pattern of starting with tightly controlled validation zones before widening coverage as real-world data accumulates, while the rocket motif on the map underscores the company’s habit of injecting visual flair into its autonomy rollout.

Riders inside the new boundary can request unsupervised Model Y trips in the Robotaxi app; exact operating hours and further Cybercab availability remain subject to app updates and company statements.

Continue Reading