News
Tesla Model Y from Giga Berlin will utilize 4680 cells and structural battery pack
Elon Musk has confirmed some interesting details about the vehicles that Tesla will be producing at Giga Berlin. According to the Tesla CEO, the Model Y that will be produced at the facility will be using the company’s custom 4680 cells and structural battery pack. Gigafactory Berlin will also be using single-piece front and rear castings for its vehicles, on top of a new paint shop.
Needless to say, it appears that the Made-in-Germany Model Y will indeed be a completely different animal compared to its siblings that are being produced in the Fremont Factory, and likely later this year, in Gigafactory Shanghai.
Musk shared his recent Giga Berlin updates on Twitter during a conversation with Tesla owner-enthusiast @WholeMarsBlog, who asked the CEO if the new 4680 cells will be heading to the German plant. Musk explained that a lot of new technology will be happening in Berlin, which means that there will be a significant amount of production risk. Once the new tech is proven, however, the innovations in the site will be rolled out to Fremont and Shanghai.
The confirmation of 4680 cells and structural battery packs for the Made-in-Germany Model Y is big news for the electric car community. During Battery Day, after all, Tesla took a very conservative stance when announcing its battery production targets, a strategy that appears to have confounded and disappointed Wall Street. That said, the company did show subtle signs that it may be ready to produce vehicles with its 4680 cells and structural battery pack sooner than expected.
Among these hints was the Roadrunner line that’s operating close to the Fremont Factory, which would be ramped to an annual output of 10 GWh. A slide during the Battery Presentation also showed what appeared to be a Tesla Model Y frame equipped with 4680 cells and a structural battery pack. Together with the vehicle’s single-piece front and rear casts, the new cells and structural pack should allow Gigafactory Berlin to ramp its vehicle production and optimize its operational costs quickly. This should help Tesla avoid the serious challenges it faced during the initial ramp of the Model 3 in the United States.
Apart from his updates about the Giga Berlin-made Model Y, Musk also noted that Tesla expects to heavily utilize LFP batteries for medium-range cars and stationary storage. This should help the company drive down its costs more while improving its environmental impact even further. LFP batteries, after all, are more affordable. They also utilize zero cobalt, which happens to be a controversial material due to questionable practices in some mines located in the Republic of Congo.
Ultimately, Musk’s recent update about the Model Y in Gigafactory Berlin bodes well for the all-electric crossover. Sandy Munro, a veteran automotive teardown specialist, has remarked that structural batteries will likely make Teslas even safer. This should help the Model Y attract more buyers in Germany and the rest of Europe, as it could very well be one of the most cost-optimized and safest vehicles in the market when it gets released.
Elon Musk
SpaceX issues statement on Starship V3 Booster 18 anomaly
The incident unfolded during gas-system pressure testing at the company’s Massey facility in Starbase, Texas.
SpaceX has issued an initial statement about Starship Booster 18’s anomaly early Friday. The incident unfolded during gas-system pressure testing at the company’s Massey facility in Starbase, Texas.
SpaceX’s initial comment
As per SpaceX in a post on its official account on social media platform X, Booster 18 was undergoing gas system pressure tests when the anomaly happened. Despite the nature of the incident, the company emphasized that no propellant was loaded, no engines were installed, and personnel were kept at a safe distance from the booster, resulting in zero injuries.
“Booster 18 suffered an anomaly during gas system pressure testing that we were conducting in advance of structural proof testing. No propellant was on the vehicle, and engines were not yet installed. The teams need time to investigate before we are confident of the cause. No one was injured as we maintain a safe distance for personnel during this type of testing. The site remains clear and we are working plans to safely reenter the site,” SpaceX wrote in its post on X.
Incident and aftermath
Livestream footage from LabPadre showed Booster 18’s lower half crumpling around the liquid oxygen tank area at approximately 4:04 a.m. CT. Subsequent images posted by on-site observers revealed extensive deformation across the booster’s lower structure. Needless to say, spaceflight observers have noted that Booster 18 would likely be a complete loss due to its anomaly.
Booster 18 had rolled out only a day earlier and was one of the first vehicles in the Starship V3 program. The V3 series incorporates structural reinforcements and reliability upgrades intended to prepare Starship for rapid-reuse testing and eventual tower-catch operations. Elon Musk has been optimistic about Starship V3, previously noting on X that the spacecraft might be able to complete initial missions to Mars.
Investor's Corner
Tesla analyst maintains $500 PT, says FSD drives better than humans now
The team also met with Tesla leaders for more than an hour to discuss autonomy, chip development, and upcoming deployment plans.
Tesla (NASDAQ:TSLA) received fresh support from Piper Sandler this week after analysts toured the Fremont Factory and tested the company’s latest Full Self-Driving software. The firm reaffirmed its $500 price target, stating that FSD V14 delivered a notably smooth robotaxi demonstration and may already perform at levels comparable to, if not better than, average human drivers.
The team also met with Tesla leaders for more than an hour to discuss autonomy, chip development, and upcoming deployment plans.
Analysts highlight autonomy progress
During more than 75 minutes of focused discussions, analysts reportedly focused on FSD v14’s updates. Piper Sandler’s team pointed to meaningful strides in perception, object handling, and overall ride smoothness during the robotaxi demo.
The visit also included discussions on updates to Tesla’s in-house chip initiatives, its Optimus program, and the growth of the company’s battery storage business. Analysts noted that Tesla continues refining cost structures and capital expenditure expectations, which are key elements in future margin recovery, as noted in a Yahoo Finance report.
Analyst Alexander Potter noted that “we think FSD is a truly impressive product that is (probably) already better at driving than the average American.” This conclusion was strengthened by what he described as a “flawless robotaxi ride to the hotel.”
Street targets diverge on TSLA
While Piper Sandler stands by its $500 target, it is not the highest estimate on the Street. Wedbush, for one, has a $600 per share price target for TSLA stock.
Other institutions have also weighed in on TSLA stock as of late. HSBC reiterated a Reduce rating with a $131 target, citing a gap between earnings fundamentals and the company’s market value. By contrast, TD Cowen maintained a Buy rating and a $509 target, pointing to strong autonomous driving demonstrations in Austin and the pace of software-driven improvements.
Stifel analysts also lifted their price target for Tesla to $508 per share over the company’s ongoing robotaxi and FSD programs.
Elon Musk
SpaceX Starship Version 3 booster crumples in early testing
Photos of the incident’s aftermath suggest that Booster 18 will likely be retired.
SpaceX’s new Starship first-stage booster, Booster 18, suffered major damage early Friday during its first round of testing in Starbase, Texas, just one day after rolling out of the factory.
Based on videos of the incident, the lower section of the rocket booster appeared to crumple during a pressurization test. Photos of the incident’s aftermath suggest that Booster 18 will likely be retired.
Booster test failure
SpaceX began structural and propellant-system verification tests on Booster 18 Thursday night at the Massey’s Test Site, only a few miles from Starbase’s production facilities, as noted in an Ars Technica report. At 4:04 a.m. CT on Friday, a livestream from LabPadre Space captured the booster’s lower half experiencing a sudden destructive event around its liquid oxygen tank section. Post-incident images, shared on X by @StarshipGazer, showed notable deformation in the booster’s lower structure.
Neither SpaceX nor Elon Musk had commented as of Friday morning, but the vehicle’s condition suggests it is likely a complete loss. This is quite unfortunate, as Booster 18 is already part of the Starship V3 program, which includes design fixes and upgrades intended to improve reliability. While SpaceX maintains a rather rapid Starship production line in Starbase, Booster 18 was generally expected to validate the improvements implemented in the V3 program.
Tight deadlines
SpaceX needs Starship boosters and upper stages to begin demonstrating rapid reuse, tower catches, and early operational Starlink missions over the next two years. More critically, NASA’s Artemis program depends on an on-orbit refueling test in the second half of 2026, a requirement for the vehicle’s expected crewed lunar landing around 2028.
While SpaceX is known for diagnosing failures quickly and returning to testing at unmatched speed, losing the newest-generation booster at the very start of its campaign highlights the immense challenge involved in scaling Starship into a reliable, high-cadence launch system. SpaceX, however, is known for getting things done quickly, so it would not be a surprise if the company manages to figure out what happened to Booster 18 in the near future.