Connect with us

News

Tesla’s new battery expert will do “whatever it takes” to improve battery performance

World renowned battery research Jeff Dahn will join forces with Tesla Motors on June 8. His mission is to do “whatever it takes” to improve the science behind the batteries Tesla relies on for its cars and energy storage devices.

Published

on

Battery expert Jeff Dahn inside the frunk of a red Model S

Jeff Dahn is a world renowned battery researcher who teaches at Dalhousie University in Nova Scotia. According to the university’s website, he “is recognized as one of the pioneering developers of the lithium-ion battery that is now used worldwide in laptop computers and cell-phones. Dahn’s recent work has concentrated on the application of Combinatorial Materials Science methods to battery and fuel cell materials problems. He is the author of over 500 refereed journal papers and co-inventor of 58 inventions with patents issued or filed.”

Up until know, Dahn has been working exclusively doing research for 3M and the Natural Sciences and Engineering Research Council of Canada to develop longer-lasting, lower cost lithium-ion battery cells, but his agreement ends on June 7. On June 8, he will join forces with Tesla Motors and work exclusively for it. He says his mandate is to do “whatever it takes” to improve the company’s battery performance.

Dahn is a proponent of a different form of battery chemistry than Tesla currently uses. Called lithium nickel manganese cobalt oxide, or NMC, it has lower capacity than lithium cobalt batteries but higher specific power and longer life, according to Battery University. Elon Musk has publicly ridiculed NMC chemistry. Tesla is firmly committed to lithium nickel cobalt aluminum oxide chemistry, or NCA.

Does hiring Dahn indicate that Tesla may be considering a shift in its core battery technology? Dahn told Quartz recently that his mission at Tesla is the same as every other battery researcher in the world — low cost, high energy density, and long battery life. But “whatever it takes,” an operational mantra he said he picked up in conversation with Kurt Kelty, Telsa’s battery director, will be his rule. “Those are the goals, and that’s how we’re going to do it,” Dahn said. “We’re open to anything that makes sense.”

A willingness to consider all possible options is a characteristic that defines Elon Musk. It’s astonishing that Musk and Tesla would consider options that challenge the battery technology they have been committed to for years, but if that’s what it takes to keep Tesla ahead of the competition, that’s what they are prepared to do.

Advertisement
-->
Source: Quartz, Feature image via Jeff Dahn Research Group

"I write about technology and the coming zero emissions revolution."

Advertisement
Comments

News

Tesla Cybercab tests are going on overdrive with production-ready units

Tesla is ramping its real-world tests of the Cybercab, with multiple sightings of the vehicle being reported across social media this week.

Published

on

Credit: @JT59052914/X

Tesla is ramping its real-world tests of the Cybercab, with multiple sightings of the autonomous two-seater being reported across social media this week. Based on videos of the vehicle that have been shared online, it appears that Cybercab tests are underway across multiple states.

Recent Cybercab sightings

Reports of Cybercab tests have ramped this week, with a vehicle that looked like a production-ready prototype being spotted at Apple’s Visitor Center in California. The vehicle in this sighting was interesting as it was equipped with a steering wheel. The vehicle also featured some changes to the design of its brake lights.

The Cybercab was also filmed testing at the Fremont factory’s test track, which also seemed to involve a vehicle that looked production-ready. This also seemed to be the case for a Cybercab that was spotted in Austin, Texas, which happened to be undergoing real-world tests. Overall, these sightings suggest that Cybercab testing is fully underway, and the vehicle is really moving towards production.

Production design all but finalized?

Recently, a near-production-ready Cybercab was showcased at Tesla’s Santana Row showroom in San Jose. The vehicle was equipped with frameless windows, dual windshield wipers, powered butterfly door struts, an extended front splitter, an updated lightbar, new wheel covers, and a license plate bracket. Interior updates include redesigned dash/door panels, refined seats with center cupholders, updated carpet, and what appeared to be improved legroom.

There seems to be a pretty good chance that the Cybercab’s design has been all but finalized, at least considering Elon Musk’s comments at the 2025 Annual Shareholder Meeting. During the event, Musk confirmed that the vehicle will enter production around April 2026, and its production targets will be quite ambitious. 

Advertisement
-->
Continue Reading

News

Tesla gets a win in Sweden as union withdraws potentially “illegal” blockade

As per recent reports, the Vision union’s planned anti-Tesla action might have been illegal. 

Published

on

Andrzej Otrębski, CC BY-SA 4.0 , via Wikimedia Commons

Swedish union Vision has withdrawn its sympathy blockade against Tesla’s planned service center and showroom in Kalmar. As per recent reports, the Vision union’s planned anti-Tesla action might have been illegal. 

Vision’s decision to pull the blockade

Vision announced the blockade in early December, stating that it was targeting the administrative handling of Tesla’s facility permits in Kalmar municipality. The sympathy measure was expected to start Monday, but was formally withdrawn via documents sent to the Mediation Institute and Kalmar Municipality last week. 

As noted in a Daggers Arbete report, plans for the strike were ultimately pulled after employer group SKR highlighted potential illegality under the Public Employment Act. Vision stressed its continued backing for the Swedish labor model, though Deputy negotiation manager Oskar Pettersson explained that the Vision union and IF Metall made the decision to cancel the planned strike together.

“We will not continue to challenge the regulations,” Petterson said. “The objection was of a technical nature. We made the assessment together with IF Metall that we were not in a position to challenge the legal assessment of whether we could take this particular action against Tesla. Therefore, we chose to revoke the notice itself.”

The SKR’s warning

Petterson also stated that SKR’s technical objection to the Vision union’s planned anti-Tesla strike framed the protest as an unauthorized act. “It was a legal assessment of the situation. Both for us and for IF Metall, it is important to be clear that we stand for the Swedish model. But we should not continue to challenge the regulations and risk getting judgments that lead nowhere in the application of the regulations,” he said. 

Advertisement
-->

Vision ultimately canceled its planned blockade against Tesla on December 9. With Vision’s withdrawal, few obstacles remain for Tesla’s long-planned Kalmar site. A foreign electrical firm completed work this fall, and Tesla’s Careers page currently lists a full-time service manager position based there, signaling an imminent opening.

Continue Reading

News

Tesla Semi program Director teases major improvements

Published

on

Credit: Tesla

Tesla Semi Program Director Dan Priestly teased the major improvements to the all-electric Class 8 truck on Thursday night, following the company’s decision to overhaul the design earlier this year.

Priestley said he drove the Semi on Thursday, and the improvements appear to be welcomed by one of the minds behind the project. “Our customers are going to love it,” he concluded.

The small detail does not seem like much, but it is coming from someone who has been involved in the development of the truck from A to Z. Priestley has been involved in the Semi program since November 2015 and has slowly worked his way through the ranks, and currently stands as the Director of the program.

Tesla Semi undergoes major redesign as dedicated factory preps for deliveries

Tesla made some major changes to the Semi design as it announced at the 2025 Annual Shareholder Meeting that it changed the look and design to welcome improvements in efficiency.

Initially, Tesla adopted the blade-like light bar for the Semi, similar to the one that is present on the Model Y Premium and the Cybertruck.

Additionally, there are some slight aesthetic changes to help with efficiency, including a redesigned bumper with improved aero channels, a smaller wraparound windshield, and a smoother roofline for better aero performance.

All of these changes came as the company’s Semi Factory, which is located on Gigafactory Nevada’s property, was finishing up construction in preparation for initial production phases, as Tesla is planning to ramp up manufacturing next year. CEO Elon Musk has said the Semi has attracted “ridiculous demand.”

The Semi has already gathered many large companies that have signed up to buy units, including Frito-Lay and PepsiCo., which have been helping Tesla test the vehicle in a pilot program to test range, efficiency, and other important metrics that will be a major selling point.

Tesla will be the Semi’s first user, though, and the truck will help solve some of the company’s logistics needs in the coming years.

Continue Reading