News
SpaceX’s Florida Starship hits growth spurt as Texas Starship begins bulkhead installation
In the last week alone, SpaceX’s twin orbital Starship prototypes have made some truly jaw-dropping progress. Onlookers have witnessed Florida’s Starship push through a rapid growth spurt, while the company’s Texas team has begun to install propellant tank bulkheads and work on a triple-Raptor thrust structure.
Meanwhile, SpaceX CEO Elon Musk has suggested that one or both of the orbital-class Starship prototypes could be “almost ready to fly” by August 24th, the date of the CEO’s next official update on Starship (formerly BFR and ITS). Although the actual challenge of building a massive, orbital-class launch vehicle is far subtler than the visible steelwork needed to build its primary structure and pressure vessels, the veritable leaps forward made in both Texas and Florida in the last 7-10 days are extremely encouraging signs.
Bulkheads galore
Starting off in Boca Chica, Texas, SpaceX’s team of engineers and technicians have been simultaneously handling Starhopper’s first untethered flight test (completed on July 25th) and building the facility’s orbital-class Starship prototype. Most significantly, after a few days of preparation, what is likely the Texas Starship’s first bulkhead was lowered inside its ~25m-tall (80 ft) barrel section, composed of the spacecraft’s propulsion section and propellant tanks.
Pictured below, technicians carefully craned the first 9m (30ft) diameter dome inside the Texas Starship on July 30th. Based on its orientation and the recent arrival of a similar dome, this particular bulkhead is almost certainly the bottom dome and first of three to be installed. It will thus serve as the bottom of the Texas Starship’s liquid methane propellant tank, as well as a significant structural member of the rocket’s thrust structure, needed to safely transfer the force of 3-6 Raptors to the rest of Starship.
SpaceX Texas also accepted delivery of the first multi-engine Starship thrust structure, featuring three obvious spots for three Raptors, meshing with Musk’s August 3rd statement that “Starship Mk1” would feature three of the engines.
11 meters, 5 days
Meanwhile, at SpaceX’s similar Florida Starship facility, the similar-but-not-quite-identical spacecraft has experienced even more rapid growth. Over the course of perhaps 4 or 5 days, technicians installed a full six new rings worth of steel segments on the vehicle’s tank section, separated from the curved nose section just like SpaceX’s Texas Starship. With an individual height of almost exactly six feet (~1.8m), the six new rings combined to add more than 10.5m to the Florida Starship’s relative height in just a few days. Combined, the nose and barrel sections would likely reach a height of 45-50m (145-165 ft), roughly 10-15% shy of full height (55m).
No fewer than 7 additional rings are visible in various stages of work (c. Aug. 4) across the Cocoa campus after the recent growth spurt.
Of note, a bulkhead visible between the Florida Starship’s barrel and nose sections in mid-July disappeared around the third week of the month, a strong indicator that SpaceX’s Florida campus actually beat Texas to their first Starship tank dome installation by as much as ~10 days. The fact that SpaceX is effectively racing itself to build the first flight-ready orbital-class Starship is deeply entertaining, but it also serves as an extremely unique example of the application of A/B testing (commonly used in software dev.) to spacecraft assembly.
Per Musk, the goal is not meant to be cutthroat (i.e. two groups enter, one group leaves) and both groups (Boca Chica and Cocoa) were said to be actively cooperating and sharing important lessons learned. Still, the geographically separated groups are visibly utilizing different methods, facilities, materials, and approaches. In effect, SpaceX has encouraged two of its own groups to duel (albeit in a semi-friendly manner) as a deeply unorthodox method of getting Starship to operational readiness as fast as physically possible.
Although Musk did partially contradict himself on August 3rd, implying that the first orbital Starship prototype(s) could be “almost ready for flight” by late August, the SpaceX CEO stated on July 19th that both Florida and Texas Starships could be ready for their first (suborbital) flights in “2 to 3 months”, or September/October. The first orbital Starship launch would follow as few as 2-3 months after that (or those) first flight milestones.
In short, Musk’s official August 24th Starship presentation is likely to be downright jaw-dropping. Stay tuned!
Check out Teslarati’s Marketplace! We offer Tesla accessories, including for the Tesla Cybertruck and Tesla Model 3.
News
Tesla gives HW3 owners another massive update
It was an “at last” moment for HW 3 owners, who have waited for an update on the capabilities of their vehicles for some time. After CEO Elon Musk finally admitted last week that the HW3 vehicles would not be capable of unsupervised FSD, it appears Tesla is bringing a new, more transparent tone to those owners.
Tesla is giving Hardware 3 vehicle owners another massive update, the second major communication the company has given to those drivers after what seemed like years of being left out to dry.
The company, which plans to launch a Full Self-Driving version 14 iteration that is compatible with these cars, which have older chips, is now planning to expand the rollout of the v14 Lite offering to other markets, it said on X.
Tesla said:
“Following future rollout of FSD V14 Lite for HW3 vehicles in the US, we plan on expanding V14 Lite to additional international markets. This update ensures that HW3 vehicle owners will continue to benefit from ongoing software updates. Since international rollout is subject to several factors (completion of technical verification, regional adaptation & relevant regulatory approvals), we can’t provide definitive dates at the moment, but will provide updates on a rolling basis.”
This announcement comes at a critical time for HW3 owners, many of whom purchased Full Self-Driving (FSD) capability years ago with promises of ongoing support and future-proofing.
Following future rollout of FSD V14 Lite for HW3 vehicles in the US, we plan on expanding V14 Lite to additional international markets.
This update ensures that HW3 vehicle owners will continue to benefit from ongoing software updates.
Since international rollout is subject to…
— Tesla (@Tesla) April 29, 2026
HW3, introduced in 2019, powers vehicles from roughly 2019 to early 2023 models. While newer AI4 hardware has advanced rapidly, HW3 owners have felt increasingly left behind, with their last major update stuck around version 12.6 since early 2025.
It was an “at last” moment for HW 3 owners, who have waited for an update on the capabilities of their vehicles for some time. After CEO Elon Musk finally admitted last week that the HW3 vehicles would not be capable of unsupervised FSD, it appears Tesla is bringing a new, more transparent tone to those owners.
V14 Lite represents a significant optimization effort. Tesla has confirmed it will bring many core features of the full V14 release, currently running on more powerful hardware, to the more constrained HW3 platform.
Expected capabilities include improved handling of complex urban scenarios, better reverse driving, enhanced parking features, and smoother overall autonomy, albeit in a “lite” form tailored to HW3’s compute limits. Tesla’s head of Autopilot, Ashok Elluswamy, noted during the Q1 2026 earnings call that the update is targeted for late June in the U.S.
Tesla is releasing a modified version of FSD v14 for Hardware 3 owners: here’s when
The international expansion is particularly meaningful for owners in Europe, Asia, Australia, and other regions where FSD rollout has lagged due to regulatory hurdles.
Tesla emphasized that timing remains fluid, dependent on “technical verification, regional adaptation & relevant regulatory approvals.” No firm dates were provided, but the company pledged rolling updates as milestones are achieved.
This move addresses growing concerns that Tesla might abandon legacy hardware. With the recent admission that its capabilities are limited and not capable of Tesla’s grand autonomy ambitions, owners are finally in the light of truth, with more honesty being put forth as the company navigates this chapter.
For Tesla, keeping HW3 relevant strengthens customer loyalty and protects the value of older vehicles. It also buys time as the company pushes toward broader regulatory approvals and unsupervised autonomy on newer platforms.
While V14 Lite isn’t the full unsupervised experience once promised, it delivers tangible improvements and signals that HW3 owners are not being forgotten.
As Tesla continues its rapid AI and autonomy evolution, this update underscores a key principle: software can breathe new life into existing hardware. For tens of thousands of HW3 drivers worldwide, V14 Lite could mark the beginning of a renewed era of confidence in their vehicles.
Elon Musk
SpaceX Board has set a Mars bonus for Elon Musk
SpaceX has given Elon Musk the goal to put one million people on Mars.
SpaceX’s board approved a compensation plan for Elon Musk that ties his pay directly to colonizing Mars and building data centers in outer space. The details surfaced this week after Reuters reviewed SpaceX’s confidential registration statement filed with the Securities and Exchange Commission, making it one of the first concrete looks inside the company’s financials ahead of a public offering.
The pay package will reportedly award Musk 200 million super-voting restricted shares if the company hits a market valuation milestone, with the most ambitious targets going further. To unlock the full award, SpaceX would need to reach a $7.5 trillion valuation and help establish a permanent human settlement on Mars with at least one million residents. Additional incentives are tied to developing space-based computing infrastructure capable of delivering at least 100 terawatts of processing power.
SpaceX wins its first MARS contract but it comes with a catch
Long before SpaceX filed anything with the SEC, Elon Musk had already spent years framing Mars colonization as an insurance policy against human extinction. The philosophy traces back to at least 2001, when Musk first began researching Mars missions independently, before SpaceX even existed. By 2002 he had founded the company with Mars as the stated long-term goal.
In a 2017 presentation at the International Astronautical Congress, Musk outlined the specific vision that still underpins SpaceX’s architecture today. He described a self-sustaining city on Mars requiring roughly one million people to become viable, the same number now written into his compensation package.
SpaceX’s Starship, still in active development, was designed from the ground up to support the eventual colonization of Mars. Musk has stated publicly that getting the cost per ton to Mars below $100,000 is necessary to make mass migration economically feasible. Everything from Starship’s payload capacity to its full reusability targets flows from that single constraint. One can say that Musk’s latest compensation package has put a formal valuation on Mars for the first time.
SpaceX is targeting an IPO around June 28, Musk’s birthday, at a valuation of approximately $1.75 trillion. Between the Mars rover contract, the Golden Dome software group, Space Force satellite launches, and now a pay structure built around interplanetary colonization, SpaceX has become the single most consequential contractor in American space and defense. The IPO will put a public price tag on all of it for the first time.
Earlier this week, we wrote a story on how Tesla is launching a new Supercharging Queue system to mitigate problems between drivers when there is a wait to charge.
Rather than potentially having people end up in a physical conflict, Tesla’s approach is to determine who is next to charge based on geographic data.
Tesla launches solution to end Supercharger fights once and for all
But some companies, notably Tesla’s biggest rival in China, BYD, are taking a different approach, focusing on charging speeds rather than how they will manage delays.
BYD’s approach, especially with its tests of ultra-fast “Flash Charging” technology, is to eliminate the length of a charging session. At the heart of this strategy is BYD’s second-generation Blade Battery paired with 1,500-kW Flash Chargers.
Real-world FLASH Charging in action.
⚡ 10% → 70% in 5 minutes
⚡ 10% → 97% in 9 minutesIntroducing BYD’s 2nd Generation Blade Battery + FLASH Charging Technology.
20,000 stations will bring faster, safer, and smarter EV charging across China by the end of 2026. pic.twitter.com/uzQC8q1xGf
— BYD (@BYDCompany) March 9, 2026
Unveiled earlier this year, the system charges compatible vehicles from 10 percent to 70 percent state of charge in just five minutes and from 10 percent to 97 percent in nine minutes.
Real-world demonstrations on models like the Yangwang U7 and Denza Z9 GT have shown the tech delivering roughly 250 miles (400 kilometers) of range in just five minutes. This would essentially match or beat the time it takes to fill a gas tank.
Sometimes, gas pumps get congested, and there are lines. You rarely see conflicts at pumps because filling up a tank rarely takes more than five minutes.
Tesla’s fastest Supercharger build currently is the v4, which can deliver up to 325 kW for Cybertruck and 250 kW for other models, but there are “true” sites that are capable of up to 500 kW. This enables speeds of up to 1,000 miles per hour, or 1,400 miles for 350 kW-capable vehicles.
The breakthrough stems from BYD’s vertically integrated ecosystem: a new 1,000-volt architecture, 10C charging rates, and proprietary silicon-carbide chips that minimize internal resistance while protecting battery health.
The company plans to install 20,000 Flash Charging stations across China by the end of 2026, with thousands already operational and global expansion eyed for Europe and beyond later this year.
Early rollout targets popular models, including upgrades to high-volume sellers like the Seal and Sealion series, bringing five-minute charging to mainstream prices around 100,000 yuan (about $14,000).
This approach contrasts sharply with Tesla’s software solution. Tesla’s Virtual Queue uses geofencing and the app to assign turns at crowded sites, addressing driver disputes and idle time. It’s a clever fix for today’s network realities.
Yet, BYD’s philosophy is simpler: make charging so fast that waits barely exist. A five-minute stop becomes as convenient as a gas-station visit, reducing station dwell time, easing grid strain, and lowering range anxiety for long trips.
For consumers, the difference is potentially tangible. They’ll spend more time driving and less time parked. It is just another way Tesla and BYD are pushing one another to improve the overall experience of EV ownership.
Tesla gives HW3 owners another massive update
SpaceX Board has set a Mars bonus for Elon Musk
