Connect with us

News

SpaceX rocket nosecone catch years in the making caught on camera

One of SpaceX's two fairing catcher ships is pictured after returning to Port Canaveral with its sister ship on July 22nd. (Richard Angle)

Published

on

In a milestone more than three years in the making, SpaceX has successfully caught both halves of a Falcon 9 rocket’s payload fairing (i.e. nosecone) and shared videos of the historic feat.

Meanwhile, twin ships GO Ms. Tree and GO Ms. Chief returned to Port Canaveral before dawn on July 22nd with their trophies safely in hand. After years of development, at least a dozen failed catch attempts, numerous soft ocean landings, and the introduction of a second identical recovery ship, SpaceX has finally proven that a full rocket fairing can be recovered for (relatively) easy reuse.

Ironically, just eight months ago, SpaceX reused an orbital-class payload fairing for the first time, proving that fairings can be recovered and reused even if they fail to land in a recovery ship’s net. As such, the milestone is slightly less monumental than it otherwise could have been – but that’s not a bad thing, in this case. Most importantly, the successful catch of both halves of a Falcon fairing serves as a reminder of SpaceX’s extraordinary tenacity in the face of repeated failures and the reality that – given enough time and resources – the company almost invariably achieves its goals.

Ms. Tree and Ms. Chief returned to port on July 22nd after an unprecedented double fairing catch. (Richard Angle)

In the scope of orbital-class rocket recovery and reusability, payload fairings – nosecones that protect payloads from the atmosphere and environment and deploy several minutes after launch – rarely register. Relative to launch vehicle stages, the fairing typically represents a small fraction of the overall rocket’s cost. However, when built almost entirely out of carbon fiber composites to save as much weight as possible, they can require an outsized amount of labor and production time. At the same time, for a company like SpaceX that has already effectively solved the problem of routine booster recovery and reuse, a part that may have once represented a small fraction of launch costs can quickly become a major portion.

For Falcon 9, with the booster representing something like 65% of the rocket’s material cost, the payload fairing’s share of overall launch cost with a reused booster can quickly balloon from 10% to ~30%. Of course, those savings really only register from an internal perspective, which is precisely way SpaceX has continued to invest in fairing reuse after years with minimal success. Cutting ~30% off the material cost of the dozens to hundreds of Starlink launches planned over the next several years could easily save SpaceX hundreds of millions of dollars.

Advertisement
The lucky Falcon 9 fairing in question. (Richard Angle)
(Richard Angle)
(Richard Angle)

As such, SpaceX continues to reap the benefits of a healthy, industry-leading commercial launch business, more or less allowing it to pay for the production of rockets and facilities by launching a few commercial missions before moving on to many, many more Starlink launches. Up to now, only Falcon boosters have been able to take advantage of that unique opportunity, but SpaceX has very recently begun to reuse payload fairings – also frequently debuting on commercial missions. As of July 23rd, SpaceX has reused Falcon 9 and Falcon Heavy fairings three times, all on Starlink satellite launches.

On July 20th, Falcon 9 booster B1058 lifted off for the second time after a record-breaking turnaround, carrying South Korea’s ANASIS II military communications satellite and a fresh payload fairing atop a new upper stage. Simultaneously breaking a drought of fairing catches, GO Ms. Tree and GO Ms. Chief successfully caught both halves of said payload fairing in their respective nets for the first time ever. Protected from saltwater immersion that can easily corrode the aluminum both inside and outside the fairings, the successful catch all but guarantees that SpaceX will be able to quickly and easily reuse this fairing on a future Starlink mission.

Two simultaneously successful catches after 12 attempts – three successful – in ~30 months is either an extraordinary fluke or a sign that SpaceX may have solved fairing recovery after years of hard work and iterative improvement. SpaceX’s next firm launch is scheduled no earlier than July 30th and another Starlink mission could potentially happen between now and then, so the company should have several attempts to test its fairing recovery luck in the near future.

Ms. Tree (formerly Mr. Steven) snagged one half of ANASIS II fairing 38 minutes after liftoff. (SpaceX)
Ms. Chief followed suit with her own catch almost exactly three minutes later. (SpaceX)

Check out Teslarati’s Marketplace! We offer Tesla accessories, including for the Tesla Cybertruck and Tesla Model 3.

Eric Ralph is Teslarati's senior spaceflight reporter and has been covering the industry in some capacity for almost half a decade, largely spurred in 2016 by a trip to Mexico to watch Elon Musk reveal SpaceX's plans for Mars in person. Aside from spreading interest and excitement about spaceflight far and wide, his primary goal is to cover humanity's ongoing efforts to expand beyond Earth to the Moon, Mars, and elsewhere.

Advertisement
Comments

News

Tesla is using a redesigned Cybertruck battery cell to mitigate Semi challenges

It is perhaps the most recent example of Tesla using unique engineering prowess and cross-pollinating vehicle elements to solve common problems, something it does better than most companies out there.

Published

on

Credit: Tesla

Tesla revealed that it is utilizing redesigned Cybertruck battery cells in its Long Range Semi to mitigate some pertinent challenges that come with long-haul logistics.

It is perhaps the most recent example of Tesla using unique engineering prowess and cross-pollinating vehicle elements to solve common problems, something it does better than most companies out there.

Tesla’s long-awaited Semi truck is entering production at its Nevada Gigafactory, and fresh factory footage reveals a clever evolution in its battery technology.

The Long Range variant, designed for up to 500 miles of real-world range, relies on a structural battery pack that uses the same 4680-form-factor cells found in the Cybertruck.

However, Tesla engineers have completely redesigned the pack’s architecture—shifting from the flat, pancake-style modules typical in passenger vehicles to a compact, vertical cubic layout. This change isn’t just about cramming more energy into the chassis; it’s a targeted solution to one of electric trucking’s biggest headaches: range loss in cold climates.

Dan Priestley, Head of the Tesla Semi program, said:

“We’re using essentially the same cell out of Cybertruck, but our cars packs are more like a pancake. Whereas these are more like a cube. You get a lot of energy stored in a small space. You can only do this if you design the vehicle to be electric from the ground up.”

In conventional EVs, battery packs are laid out horizontally in wide, flat arrays to fit under the floor. While this works for cars and even the Cybertruck’s structural pack, it exposes a large surface area to the elements.

Heat escapes quickly, especially overnight when the truck is parked. Cold temperatures slow chemical reactions inside lithium-ion cells, reducing available energy and forcing the vehicle to expend extra power warming the battery and cabin.

Real-world tests on vehicles like the Cybertruck show winter range losses of 20-40 percent, depending on conditions. For long-haul truck drivers operating in Canada, Scandinavia, or the northern U.S., this “silent killer” means unplanned stops, reduced payloads, and higher operating costs.

From personal experience, cold weather still impacts EV batteries even with various inventions and strategies that companies have come up with. In the cold Pennsylvania winter, charging was much more frequent for me due to range loss due to temperatures.

Tesla’s cubic battery pack flips the script. By arranging the 4680 cells in tall, dense vertical stacks, the pack minimizes external surface area relative to its volume—essentially turning the battery into its own thermal blanket.

Factory video from the Semi assembly line shows these large, yellow-green structural modules mounted directly onto the chassis, forming a near-cube shape.

The reduced exposure helps the pack retain heat generated during operation, keeping cells closer to their optimal temperature even after hours in sub-zero conditions.

The design doesn’t stop there. Tesla pairs the cubic pack with an advanced heat pump system that actively recycles thermal energy from the motors, brakes, and even ambient air.

Tesla reveals various improvements to the Semi in new piece with Jay Leno

Unlike passive systems in earlier EVs, this architecture transfers waste heat back into the battery, maintaining readiness for morning departures without draining the pack.

Executives have noted that the combination, cubic geometry plus intelligent thermal management, dramatically cuts overnight cooldown and range degradation, making the Semi viable for 24/7 fleet operations in harsh winters.

Beyond cold-weather performance, the redesigned pack integrates structurally with the truck’s frame, enhancing rigidity while simplifying assembly. Production footage shows workers installing the massive modules early in the line, signaling that the Semi’s battery is now a core chassis component rather than an add-on.

Using proven 4680 cells keeps costs down and leverages Tesla’s scaled manufacturing know-how from Cybertruck and Model Y lines.

Tesla’s focus on ramping up Semi output will lean on small innovative steps like this one. Truckers are not immune to traveling in cold weather conditions, and changes like this one will help make them more effective while also increasing output by logistics operators who choose to go all-electric with the Tesla Semi.

Continue Reading

Elon Musk

SpaceX is keeping the Space Station alive again this weekend

SpaceX’s Falcon 9 launches Northrop Grumman’s Cygnus NG-24 to the ISS with 11,000 pounds of cargo Saturday.

Published

on

By

spacex-investment-alphabet-profit

SpaceX is targeting April 11 for the launch of Northrop Grumman’s Cygnus XL cargo spacecraft to the International Space Station, carrying over 11,000 pounds of supplies, science hardware, and equipment for the Expedition 73 crew aboard. Liftoff is set for 7:41 a.m. ET from Space Launch Complex 40 at Cape Canaveral Space Force Station, with a backup window available April 12 at 7:18 a.m. ET.

The mission, officially designated NG-24 under NASA’s Commercial Resupply Services program, names its spacecraft the S.S. Steven R. Nagel in honor of the NASA astronaut who flew four Space Shuttle missions and logged over 723 hours in space before his death in 2014. Unlike SpaceX’s own Dragon capsule, which docks autonomously, Cygnus relies on NASA astronauts to capture it using a robotic arm before it is berthed to the space station’s module for unloading. When the mission wraps up around October, the Cygnus will depart loaded with station trash and burn up on reentry.

Countdown: America is going back to the Moon and SpaceX holds the key to what comes after

This is the second flight of the Cygnus XL configuration, which debuted on NG-23 in September 2025 and offers a roughly 20% increase in cargo capacity over the previous design. Northrop Grumman switched to Falcon 9 launches after its own Antares 230+ rocket was retired in 2023 following supply chain disruptions from the war in Ukraine.

The upcoming cargo includes a new module to advance quantum research, and an investigation studying blood stem cell production in microgravity with potential therapeutic applications on Earth.

The NG-24 mission is one piece of a much larger picture for SpaceX and the U.S. government. As Teslarati reported, SpaceX has become an indispensable launch provider for U.S. national security missions, picking up a $178.5 million Space Force contract in April 2026 to launch missile tracking satellites, while also holding roughly $4 billion in NASA contracts tied to the Artemis lunar program.

At a time when no other American rocket can match the Falcon 9’s combination of reliability, cost, and launch cadence, Saturday’s mission is a straightforward reminder of how much the U.S. government now depends on a single commercial provider to keep its astronauts supplied and its satellites flying.

Continue Reading

News

Tesla hits FSD hackers with surprise move

In recent weeks, the company has begun remotely disabling FSD capabilities on affected vehicles, and in some instances, permanently revoking access even for owners who paid thousands of dollars for the feature.

Published

on

Tesla is cracking down on hackers who have figured out a way to utilize third-party programs to activate Full Self-Driving (FSD) in their vehicles — despite the suite not being approved for use in their country.

Tesla has launched a sweeping enforcement campaign against owners using third-party hardware hacks to activate FSD software in countries where the advanced driver-assistance system remains unregulated or unapproved.

In recent weeks, the company has begun remotely disabling FSD capabilities on affected vehicles, and in some instances, permanently revoking access even for owners who paid thousands of dollars for the feature.

Reports of the crackdown have surfaced across Europe, China, Japan, South Korea, and the UK, marking a significant escalation in Tesla’s efforts to enforce regional software restrictions.

FSD is Tesla’s flagship supervised autonomy package, which is available in several countries across the world. Currently limited by regulatory hurdles, it has not received full approval in most markets outside of the United States due to various things, such as safety standards, data privacy, and local traffic laws.

However, the company is working to expand its availability globally. Nevertheless, Tesla has installed the necessary hardware on vehicles globally, but locks the features based on geographic location.

Some owners have taken accessing FSD into their own hands, using jailbreak or bypass devices.

These “jailbreak” tools, typically €500 USB-style modules that plug into the vehicle’s Controller Area Network (CAN) bus, intercept signals to spoof approvals and unlock FSD, including advanced navigation, Autopark, and Summon features.

Hackers in Poland, Ukraine, and elsewhere have distributed the devices, with some claiming they work on HW3 and HW4 vehicles and can be unplugged to restore stock settings. In China alone, over 100,000 owners reportedly installed such modifications.

Tesla’s response has been swift and uncompromising. Recently, the company began sending in-car notifications and emails warning owners that unauthorized modifications violate terms of service, compromise vehicle safety systems, and expose cars to cybersecurity risks.

The email communication read:

“Your vehicle has detected an unauthorized third-party device. As a precaution, some driver assistance functions have been disabled for safety reasons. A software update will be available soon. Once you install the update, some features may be enabled again.”

Vehicles detected using the hacks have had FSD capabilities remotely disabled without refund. In some cases, owners report permanent bans, even if they had legitimately purchased the software package.

Tesla’s hardline stance underscores its commitment to regulatory compliance and safety.

Tesla has long argued that unsupervised FSD requires rigorous validation, and premature activation could endanger drivers and bystanders.

The crackdown sends a clear-cut message to those who are bypassing the FSD safeguards, but there are greater implications for Tesla if something were to go wrong. This is an understandable way to protect the company’s reputation for its FSD suite.

Continue Reading