News
Scrubtober strikes again: faulty SpaceX rocket camera aborts Starlink-14 launch
Update: SpaceX’s next Starlink-14 launch attempt appears to be scheduled no earlier than (NET) 11:31 am EDT (15:31 UTC), Saturday, October 24th, ending the possibility of Falcon 9 booster B1060 setting a new turnaround record. If successful, the mission will still mark the first time SpaceX has complete three Starlink launches in one month.
CEO Elon Musk says that a faulty camera on a SpaceX Falcon 9 rocket’s new upper stage lead the company to abort its October 22nd Starlink-14 launch attempt around 15 minutes before liftoff.
The abort continues what has been less than affectionately termed “Scrubtober” after a relentless string of delays that actually began closer to mid September or even late August. Multiple delays for ULA’s Delta IV Heavy NROL-44 launch quickly snowballed into several SpaceX Falcon 9 launch delays, follower by additional weather-related SpaceX launch delays in September. Then, once again, additional ULA NROL-44 delays caused additional Falcon 9 delays, followed by two rare technical delays for the same SpaceX missions.
The Starlink mission in question finally launched on October 5th, while SpaceX’s third US military GPS III satellite launch was indefinitely scrubbed when an issue with several booster engines triggered a last-second abort. Thankfully, SpaceX was able to launch another Starlink mission – Starlink V1 L13 or Starlink-13 on October 18th – albeit only after more than a week of delays. Now, already delayed by 24 hours for unknown reasons, SpaceX’s Starlink-14 mission suffered its own launch abort just ~15 minutes before liftoff, continuing the plague that is Scrubtober.
Set to deliver another ~16 metric ton (~35,000 lb) batch of 60 Starlink v1.0 satellites to low Earth orbit (LEO), Starlink-14 will be SpaceX’s 14th operational Starlink launch and 15th overall, as well as the 13th Starlink launch in 2020 alone.
As usual, the mission will use SpaceX’s Falcon 9 rocket, a two-stage, 70m (~230 ft) tall launch vehicle powered by liquid oxygen and refined kerosene (RP-1) propellant. Weighing more than 550 metric tons (1.2 million lb) fully fueled, the first stage (booster) produces more than 7600 kilonewtons of thrust (1.7 million lbf) at liftoff with nine Merlin 1D engines. On the global stage, Falcon 9 is the most reliable operational launch vehicle in the world, having consecutively completed 67 successful missions since January 2017.

Continuing to demonstrate the ironic fact that SpaceX’s flight-proven rockets have begun to be more reliable than new hardware, Falcon 9 booster B1060 – onto its third launch and landing – apparently remains ready for launch despite issues with a camera on Starlink-14’s new expendable upper stage. As previously discussed on Teslarati, B1060 was on track to set a new world record for orbital-class rocket turnaround, launching twice in 49 days if Starlink-14 had avoided today’s abort. Set by another Falcon 9 booster just three months ago, SpaceX could still break its own 51-day turnaround record if it can inspect and recycle the rocket for another Starlink-14 launch attempt on October 23rd.
Cybertruck
Tesla drops latest hint that new Cybertruck trim is selling like hotcakes
According to Tesla’s Online Design Studio, the new All-Wheel-Drive Cybertruck will now be delivered in April 2027. Earlier orders are still slated for early this Summer, but orders from here on forward are now officially pushed into next year:
Tesla’s new Cybertruck offering has had its delivery date pushed back once again. This is now the second time, and deliveries for the newest orders are now pushed well into 2027.
According to Tesla’s Online Design Studio, the new All-Wheel-Drive Cybertruck will now be delivered in April 2027. Earlier orders are still slated for early this Summer, but orders from here on forward are now officially pushed into next year:
🚨 Tesla has updated the $59,990 Cybertruck Dual Motor AWD’s estimated delivery date to April 2027.
First deliveries are still slated for June, but if you order it now, you’ll be waiting over a year.
Demand appears to be off the charts for the new Cybertruck and consumers are… pic.twitter.com/raDCCeC0zP
— TESLARATI (@Teslarati) February 26, 2026
Just three days ago, the initial delivery date of June 2026 was pushed back to early Fall, and now, that date has officially moved to April 2027.
The fact that Tesla has had to push back deliveries once again proves one of two things: either Tesla has slow production plans for the new Cybertruck trim, or demand is off the charts.
Judging by how Tesla is already planning to raise the price based on demand in just a few days, it seems like the company knows it is giving a tremendous deal on this spec of Cybertruck, and units are moving quickly.
That points more toward demand and not necessarily to slower production plans, but it is not confirmed.
Tesla Cybertruck’s newest trim will undergo massive change in ten days, Musk says
Tesla is set to hike the price on March 1, so tomorrow will be the final day to grab the new Cybertruck trim for just $59,990.
It features:
- Dual Motor AWD w/ est. 325 mi of range
- Powered tonneau cover
- Bed outlets (2x 120V + 1x 240V) & Powershare capability
- Coil springs w/ adaptive damping
- Heated first-row seats w/ textile material that is easy to clean
- Steer-by-wire & Four Wheel Steering
- 6’ x 4’ composite bed
- Towing capacity of up to 7,500 lbs
- Powered frunk
Interestingly, the price offering is fairly close to what Tesla unveiled back in late 2019.
Elon Musk
Elon Musk outlines plan for first Starship tower catch attempt
Musk confirmed that Starship V3 Ship 1 (SN1) is headed for ground tests and expressed strong confidence in the updated vehicle design.
Elon Musk has clarified when SpaceX will first attempt to catch Starship’s upper stage with its launch tower. The CEO’s update provides the clearest teaser yet for the spacecraft’s recovery roadmap.
Musk shared the details in recent posts on X. In his initial post, Musk confirmed that Starship V3 Ship 1 (SN1) is headed for ground tests and expressed strong confidence in the updated vehicle design.
“Starship V3 SN1 headed for ground tests. I am highly confident that the V3 design will achieve full reusability,” Musk wrote.
In a follow-up post, Musk addressed when SpaceX would attempt to catch the upper stage using the launch tower’s robotic arms.
“Should note that SpaceX will only try to catch the ship with the tower after two perfect soft landings in the ocean. The risk of the ship breaking up over land needs to be very low,” Musk clarified.
His remarks suggest that SpaceX is deliberately reducing risk before attempting a tower catch of Starship’s upper stage. Such a milestone would mark a major step towards the full reuse of the Starship system.
SpaceX is currently targeting the first Starship V3 flight of 2026 this coming March. The spacecraft’s V3 iteration is widely viewed as a key milestone in SpaceX’s long-term strategy to make Starship fully reusable.Â
Starship V3 features a number of key upgrades over its previous iterations. The vehicle is equipped with SpaceX’s Raptor V3 engines, which are designed to deliver significantly higher thrust than earlier versions while reducing cost and weight.
The V3 design is also expected to be optimized for manufacturability, a critical step if SpaceX intends to scale the spacecraft’s production toward frequent launches for Starlink, lunar missions, and eventually Mars.
News
Tesla FSD (Supervised) could be approved in the Netherlands next month: Musk
Musk shared the update during a recent interview at Giga Berlin.
Tesla CEO Elon Musk shared that Full Self-Driving (FSD) could receive regulatory approval in the Netherlands as soon as March 20, potentially marking a major step forward for Tesla’s advanced driver-assistance rollout in Europe.
Musk shared the update during a recent interview at Giga Berlin, noting that the date was provided by local authorities.
“Tesla has the most advanced real-world AI, and hopefully, it will be approved soon in Europe. We’re told by the authorities that March 20th, it’ll be approved in the Netherlands,’ what I was told,” Musk stated.Â
“Hopefully, that date remains the same. But I think people in Europe are going to be pretty blown away by how good the Tesla car AI is in being able to drive.”
Tesla’s FSD system relies on vision-based neural networks trained on real-world driving data, allowing vehicles to navigate using cameras and AI rather than traditional sensor-heavy solutions.
The performance of FSD Supervised has so far been impressive. As per Tesla’s safety report, Full Self-Driving Supervised has already traveled 8.3 billion miles. So far, vehicles operating with FSD Supervised engaged recorded one major collision every 5,300,676 miles.
In comparison, Teslas driven manually with Active Safety systems recorded one major collision every 2,175,763 miles, while Teslas driven manually without Active Safety recorded one major collision every 855,132 miles. The U.S. average during the same period was one major collision every 660,164 miles.
If approval is granted on March 20, the Netherlands could become the first European market to greenlight Tesla’s latest supervised FSD (Supervised) software under updated regulatory frameworks. Tesla has been working to secure expanded FSD access across Europe, where regulatory standards differ significantly from those in the United States. Approval in the Netherlands would likely serve as a foundation for broader EU adoption, though additional country-level clearances may still be required.