Connect with us

News

SpaceX Starship launch tower grows to more than half its full height

SpaceX installed another prefabricated section of a Starship 'launch tower,' raising the structure to more than half its final height. (NASASpaceflight.com)

Published

on

SpaceX has installed another prefabricated segment of a new Starship ‘launch tower,’ raising the skyscraper-sized framework to more than half its full height.

Measuring some 86 meters (~280 ft) tall after the latest segment was craned on top, the growing launch tower is now the tallest structure SpaceX has ever built (or had built) – outclassing the 81m (265 ft) ‘high bay’ constructed nearby to shield Starship and Super Heavy booster assembly from the worst of the coastal Texas weather. However, that tower is far from complete and should nearly double in height over the next month or two.

Five tower ‘sections’ have been installed or constructed over the last three months, beginning with a concrete base and a steel section assembled in-situ and followed by the installation of three more steel sections prefabricated around two miles west of the launch site. The concrete base and first steelwork appear to be approximately 32m (~105 ft) tall, while each prefabricated segment has – so far – been ~18m (~60 ft) tall.

A fourth prefabricated section has already been finished and delivered to the launch site and will likely be installed on the tower within a few days, raising it above the 100-meter mark. Back at the build site, a fifth section is almost complete. Once all five prefab segments have been joined, the tower will stand an imposing 122m (400 ft) tall.

That imminent milestone – likely just a week or two away – does raise the question of whether SpaceX is one or two more prefabricated segments away from completing the tower’s structural skeleton. SpaceX currently has permission from the FAA to build a tower 143m (469 ft) tall – technically 146m (479 ft) after the installation of a small lightning rod. With six identical prefabricated sections installed, the existing tower will likely stand around 140m (~460 ft) tall. A seventh identical section would raise the tower’s height to some 158m (~520 ft) – substantially taller than anything SpaceX currently has permission to build.

Advertisement

That would seem to imply that Starship’s launch tower is just two prefabricated sections away from reaching its final height, meaning that it could easily be completed before the end of the month. SpaceX will still have to outfit the tower with an unproven, custom-built mechanism meant to catch Super Heavy boosters (and eventually ships) but Starship’s inaugural orbital flight test campaign does not appear to be contingent on that mechanism.

In the meantime, the tower’s main purpose will be to support a crane capable of stacking Starships on Super Heavy boosters, as well as some kind of stabilization mechanism to make that delicate process slightly more viable on the windy South Texas coast. At the current rate of tower construction, it won’t be long before SpaceX’s solution for those problems becomes apparent.

Eric Ralph is Teslarati's senior spaceflight reporter and has been covering the industry in some capacity for almost half a decade, largely spurred in 2016 by a trip to Mexico to watch Elon Musk reveal SpaceX's plans for Mars in person. Aside from spreading interest and excitement about spaceflight far and wide, his primary goal is to cover humanity's ongoing efforts to expand beyond Earth to the Moon, Mars, and elsewhere.

Elon Musk

Tesla CEO Elon Musk’s $1 trillion pay package hits first adversity from proxy firm

ISS said the size of the pay package will enable Musk to have access to “extraordinarily high pay opportunities over the next ten years,” and it will have an impact on future packages because it will “reduce the board’s ability to meaningfully adjust future pay levels.”

Published

on

tesla elon musk

Tesla CEO Elon Musk’s $1 trillion pay package, which was proposed by the company last month, has hit its first bit of adversity from proxy advisory firm Institutional Shareholder Services (ISS).

Musk has called the firm “ISIS,” a play on its name relating it to the terrorist organization, in the past.

The pay package aims to lock in Musk to the CEO role at Tesla for the next decade, as it will only be paid in full if he is able to unlock each tranche based on company growth, which will reward shareholders.

However, the sum is incredibly large and would give Musk the ability to become the first trillionaire in history, based on his holdings. This is precisely why ISS is advising shareholders to vote against the pay plan.

The group said that Musk’s pay package will lock him in, which is the goal of the Board, and it is especially important to do this because of his “track record and vision.”

However, it also said the size of the pay package will enable Musk to have access to “extraordinarily high pay opportunities over the next ten years,” and it will have an impact on future packages because it will “reduce the board’s ability to meaningfully adjust future pay levels.”

The release from ISS called the size of Musk’s pay package “astronomical” and said its design could continue to pay the CEO massive amounts of money for even partially achieving the goals. This could end up in potential dilution for existing investors.

If Musk were to reach all of the tranches, Tesla’s market cap could reach up to $8.5 trillion, which would make it the most valuable company in the world.

Tesla has made its own attempts to woo shareholders into voting for the pay package, which it feels is crucial not only for retaining Musk but also for continuing to create value for shareholders.

Tesla launched an ad for Elon Musk’s pay package on Paramount+

Musk has also said he would like to have more ownership control of Tesla, so he would not have as much of an issue with who he calls “activist shareholders.”

Continue Reading

News

Tesla is adding an interesting feature to its centerscreen in a coming update

In a recent dissection of coding, Tesla hacker green noticed that the company is bringing in screenshare with Software Update 2025.38

Published

on

Credit: Tesla

Tesla is adding an interesting feature to its center touchscreen in a coming update, according to a noted hacker.

In a recent dissection of coding, Tesla hacker green noticed that the company is bringing in screenshare with Software Update 2025.38. Details on the use case are slim, but he said the feature would export the car screen so it could be viewed remotely.

It would bring up a notification on the screen, along with a four-digit pin that would link the two together:

As previously mentioned, the use case is unclear, but there are some ideas. One of which is for remote support, which is something Apple has used to help resolve issues with its products.

Support staff and employees routinely tap into customers’ screens to help resolve issues, so this could be a way Tesla could also use it.

This seems especially relevant with Robotaxi, as the screen might be a crucial part of resolving customer complaints when there is no employee in the car.

Additionally, it seems as if it will not be exclusive to those owners who have newer vehicles that utilize the AMD chip. Intel will get support with the new feature as well, according to what green has noticed in the coding.

Finally, it could also be used with all sorts of content creation, especially as Full Self-Driving videos and what the vehicle sees in Driver Visualization.

As it is released, Tesla will likely release more information regarding what the screensharing mode will be used for.

For right now, many owners are wondering where it could actually work and what advantages it will offer for owners as well as the company itself.

Continue Reading

Elon Musk

SpaceX posts Starship booster feat that’s so nutty, it doesn’t even look real

The Super Heavy booster’s feat was so impressive that the whole maneuver almost looked like it was AI-generated.

Published

on

Credit: SpaceX/X

SpaceX has shared a video of a remarkable feat achieved by Starship’s Super Heavy booster during its 11th flight test.

The Super Heavy booster’s feat was so impressive that the whole maneuver, which was captured on video, almost looked like it was AI-generated.

Super Heavy’s picture perfect hover

As could be seen in the video shared by SpaceX, Starship’s Super Heavy booster, which is nearly 400 feet tall, smoothly returned to Earth and hovered above the Gulf of America for a few seconds before it went for its soft water landing. The booster’s picture-perfect maneuver before splashing down all but capped a near-flawless mission for Starship, which is about to enter its V3 era with Flight 12.

The booster’s balance and stability were so perfect that some users on X joked that the whole thing looked AI-generated. Considering the size of Super Heavy, as well as the fact that the booster was returning from space, the hovering display all but showed that SpaceX is dead serious about keeping its dominant lead in the spaceflight sector.

Starship V2’s curtain call

As noted in a Space.com report, Flight Test 11 achieved every major goal SpaceX had set for the mission, including deploying Starlink mass simulators, relighting Raptor engines in space, and executing a stable reentry for both the Starship Upper Stage and the Super Heavy booster. The feat also marked the second time a Super Heavy booster has been reflown, a milestone in SpaceX’s quest to make the entire Starship system fully reusable.

Advertisement

Starship’s V2 vehicle will now give way to the upgraded Starship V3, which is designed for faster turnaround and higher payload capacity. The Starship program is expected to pursue even more aggressive targets in the coming months as well, with Elon Musk stating on social media platform X that SpaceX will attempt a tower catch for Starship Upper Stage as early as spring 2026.

Continue Reading

Trending