Connect with us

News

SpaceX installs first parts of tower meant to catch Starship boosters

Published

4 years ago

on

SpaceX’s Starship ‘launch tower’ appears to have been outfitted with the first major component of a mechanism that’s meant to allow the structure to catch Starship boosters – and maybe the ships themselves – in mid-air.

Already speeding towards completion just a few months after assembly began, the tower’s primary purpose is to provide a stable platform capable of steadying Starships and Super Heavy boosters during final integration, when the two stages combine to become one launch vehicle. Situated a stone’s throw from the Gulf of Mexico on the windy South Texas coast, the process of carefully mating two halves of what amounts to a several hundred ton skyscraper will be far harder than it might seem.

Though early operations could likely trade refinement for patience and some level of added risk, regular Starship operations will necessitate rapid, reliable, and repeatable mating in almost all weather and wind conditions. In other words, Starship’s integration tower will likely be outfitted with arm-like structures capable of temporarily fixing Starships and Super Heavy boosters in place. Teased several times by CEO Elon Musk over the last six or so months, SpaceX or its stubborn leader seem to have decided somewhere along the way that the same tower could potentially catch those building-sized rocket stages, too.

Recently described as “basically Mechazilla” by Musk, the launch tower’s supposed catching mechanism is almost a complete mystery. Based on the CEO’s comments, the implication is that some kind of giant, mobile pair of robotic arms will be affixed to the tower’s exterior. When catching Super Heavy boosters, Musk says those arms will ‘grab’ the rocket just below its Falcon booster-style grid fins. In fact, a prototype of a Super Heavy booster’s grid fin section was recently completed at SpaceX’s Boca Chica factory and sports what looks like two anchor-like structures that could be used to secure and grapple the rocket.

Falcon 9 booster B1048 bares three of its four hold-down anchors. (Richard Angle)

A bit like the four anchors used to secure Falcon boosters to the launch pad before liftoff and withstand hundreds of tons of thrust, the structures installed between Super Heavy grid fin mounts appear similar but are instead installed near the top of the rocket. Perfect, in other words, to serve as anchor points for cranes or clamps. It’s possible that Super Heavy boosters could also ‘land’ by resting the flat rear end of those hardpoints on the tower’s arms.

At the same time, catching boosters with the flat end of those hardpoints with give Super Heavy an extraordinarily narrow window for successful recovery unless its grid fins are also capable of serving as the passive part of the catch mechanism.

Advertisement
The tower’s guide rail-like structures are visible here running up and down the left beams. (NASASpaceflight.com)

Known as a drawworks and potentially scavenged from Phobos, an oil rig turned SpaceX sea launch platform, the powerful hoist may be the first part of the mechanism that could allow the tower’s arms to roll up and down its exterior, ‘cushion’ landing boosters, and function a bit like a crane. Using rail-like structures visible on three of the tower’s four ‘legs,’ the hoist could lift that mechanism like a sort of complex rocket elevator.

Ultimately, though, SpaceX’s unprecedented Starship launch/catch tower will remain a mystery until it’s fully assembled and in active use. Thankfully, based on the rate of progress being made over the last few months, those milestones might be just a few months away.

Related Topics:

Eric Ralph is Teslarati's senior spaceflight reporter and has been covering the industry in some capacity for almost half a decade, largely spurred in 2016 by a trip to Mexico to watch Elon Musk reveal SpaceX's plans for Mars in person. Aside from spreading interest and excitement about spaceflight far and wide, his primary goal is to cover humanity's ongoing efforts to expand beyond Earth to the Moon, Mars, and elsewhere.

Advertisement
Comments

News

Tesla takes first step in sunsetting Model S and X with drastic move

Tesla won’t be taking custom orders of the Model S or Model X in Europe any longer.

Published

9 hours ago

on

July 30, 2025

By

Credit: @supergeek18 | X

Tesla has seemingly taken the first step in sunsetting two of its older vehicles, the Model S and Model X, by ending international orders.

The flagship sedan and SUV from Tesla are the two oldest cars in the company’s lineup. They account for a very small portion of overall sales, and several years ago, CEO Elon Musk admitted that Tesla only continues to build and sell them due to “sentimental reasons.”

Earlier this year, there were calls for Tesla to end the production of the two cars, but Lars Moravy said that the Model S and Model X were due to get some love later in 2025. That happened, but the changes were extremely minor.

Tesla launches new Model S and Model X, and the changes are slim

Some took this as an indication that Tesla has kind of moved on from the Model S and Model X. A handful of people seemed to think Tesla would overhaul the vehicles substantially, but the changes were extremely minor and included only a few real adjustments.

In Europe, customers are unable to even put a new order in on a Model S or Model X.

We noticed earlier today that Tesla pressing the ‘Order’ button on either of the flagship vehicles takes you to local inventory, and not the Design Studio where you’d configure your custom build:

Tesla simply does not make enough Model S or Model X units to justify the expensive logistics process of shipping custom orders overseas. It almost seems as if they’re that they will essentially build a bunch of random configurations, send them overseas every few months, and let them sell before replenishing inventory.

Inversely, it could also mean Tesla is truly gearing up to sunset the vehicle altogether. It seems unlikely that the company will fade them out altogether in the next couple of years, but it could absolutely think about ending international orders because volume is so low.

Continue Reading

Energy

Tesla inks multi-billion-dollar deal with LG Energy Solution to avoid tariff pressure

Tesla has reportedly secured a sizable partnership with LGES for LFP cells, and there’s an extra positive out of it.

Published

14 hours ago

on

July 30, 2025

By

Credit: Tesla

Tesla has reportedly inked a multi-billion-dollar deal with LG Energy Solution in an effort to avoid tariff pressure and domesticate more of its supply chain.

Reuters is reporting that Tesla and LGES, a South Korean battery supplier of the automaker, signed a $4.3 billion deal for energy storage system batteries. The cells are going to be manufactured by LGES at its U.S. factory located in Michigan, the report indicates. The batteries will be the lithium iron phosphate, or LFP, chemistry.

Tesla delivers 384,000 vehicles in Q2 2025, deploys 9.6 GWh in energy storage

It is a move Tesla is making to avoid buying cells and parts from overseas as the Trump White House continues to use tariffs to prioritize domestic manufacturing.

LGES announced earlier today that it had signed a $4.3 billion contract to supply LFP cells over three years to a company, but it did not identify the customer, nor did the company state whether the batteries would be used in automotive or energy storage applications.

The deal is advantageous for both companies. Tesla is going to alleviate its reliance on battery cells that are built out of the country, so it’s going to be able to take some financial pressure off itself.

For LGES, the company has reported that it has experienced slowed demand for its cells in terms of automotive applications. It planned to offset this demand lag with more projects involving the cells in energy storage projects. This has been helped by the need for these systems at data centers used for AI.

During the Q1 Earnings Call, Tesla CFO Vaibhav Taneja confirmed that the company’s energy division had been impacted by the need to source cells from China-based suppliers. He went on to say that the company would work on “securing additional supply chain from non-China-based suppliers.”

It seems as if Tesla has managed to secure some of this needed domestic supply chain.

Continue Reading

Lifestyle

Tesla brings perhaps the coolest interior feature to cars in latest update

Tesla adds on to the “fun” aspect of its vehicles.

Published

15 hours ago

on

July 30, 2025

By

Credit: Tesla

Tesla has brought perhaps the coolest interior feature to its cars in a new update that is rolling out to vehicles now.

The feature will require a newer vehicle that has interior ambient lighting, which is present on the new Model S, Model X, Model 3 “Highland,” and Model Y “Juniper.” The Cybertruck also has ambient lighting strips throughout.

Tesla Model Y’s ambient lighting design changes revealed in leaked video

With the Version 2025.26+ Software Update, Tesla is rolling out a new “Sync Accent Lights w/ Music” feature, which is available on the Tesla Toybox:

To enable the feature, you’ll access the Toybox, choose “Light Sync,” and then choose “Sync Accent Lights w/ Music.”

Although it does not improve the performance of the vehicle, it is yet another example of Tesla making one of the coolest cars out there. This is truly a cool add-on that can be used to impress your friends and family.

Continue Reading

Trending