News
SpaceX’s upgraded Starship passes first ‘cryoproof’ test after repairs
SpaceX CEO Elon Musk says an upgraded Starship prototype has passed its first cryogenic proof or ‘cryoproof’ test after undergoing a week of repairs.
Around noon, local sheriffs closed the road to Starbase’s orbital launch site (OLS) and SpaceX cleared the pad of all personnel, freeing up Starship S24 for the next stage of testing. A week prior, on May 27th, Ship 24 suffered some degree of internal damage during a simpler pneumatic proof test with ambient-temperature nitrogen gas. It’s now clear that most of that pneumatic proof test was successful, demonstrating that the Starship’s main propellant tanks and associated plumbing and valves were structurally sound and working as expected.
Still, for about a week after that first test, teams of SpaceX workers swarmed the Starship prototype 24/7 and were seen extracting damaged plumbing and carefully transporting replacement parts inside. Only on the morning of June 2nd was Ship 24 sealed up again.
Cryogenic fluid loading – liquid nitrogen or a combo of LN2 and liquid oxygen (LOx) – began shortly before 3pm CDT (UTC-5) and the Starship’s main tanks were fully filled about 70 minutes later. SpaceX then let those fluids naturally warm, causing a small portion to boil into gas and gradually raise the pressure inside Ship 24’s main tanks. As the pressure grew, sections of the layers of frost and ice that formed on the outside of its thin steel tanks occasionally sloughed off in sheets or broke off in fragments – the only evidence of stress aside from venting.
After about an hour fully filled, SpaceX began detanking and depressurizing Ship 24. The road and pad were reopened around 8:40 pm. All told, aside from an apparent leak on its liquid oxygen tank access hatch, a very common occurrence, Ship 24 exhibited no unusual behavior and made it through its first cryoproof without any obvious issue. More importantly, SpaceX did not appear to reattempt the pneumatic proof test the ship partially failed before the harder cryoproof test, implying that its first test was mostly successful. CEO Elon Musk later confirmed that the Starship had passed its first cryoproof test a few hours after.
Despite Musk’s positive comment, there was no evidence of activity in Ship 24’s nose section, where a number of crucial vents and secondary header tanks – meant to serve as attitude control thrusters and store landing propellant – are located. Ship 24 is the first Starship prototype with a new design that moved both header tanks into the tip of the nosecone. The nose itself is also the first with a number of other manufacturing and design upgrades to reach a test stand, so verifying that it works as expected is doubly important.
Given that the plumbing that failed in the first test may have been connected to Ship 24’s nose section and header tanks and that neither was obviously involved in the subsequent June 2nd cryoproof, it’s likely that the Starship prototype is not done with cryoproof testing just yet. Nonetheless, the ship’s survival and passage of its first cryoproof bodes well for the next steps.
-
In the near future, SpaceX is expected to move Ship 24 to a nearby ‘suborbital pad’ and test stand that has been significantly modified to simulate the thrust and mechanical stress of six Raptor 2 engines. If or when Ship 24 passes that test or tests, SpaceX will likely remove the stand’s hydraulic rams and begin installing Raptor engines and associated heat shielding. Then, Starship S24 can enter the final stages of qualification: wet dress rehearsal and static fire testing.
SpaceX has requested additional road closures for potential testing on June 6th, 7th, and 8th.
Tesla has started to deploy the 2026 Summer Update to owners across its fleet, and among the biggest changes are improvements to Navigation, a new startup animation for the Model 3 and Model Y, Caraoke scoring, and new capabilities for Grok.
As the update has started making its way to some cars, we can now see a few of the features operating in real-time. We will show you what some of the new features look like in this article, along with some additional details on what changed.
Not all of the new features in the 2026 Summer Update have quite made an appearance, but some of them have, so we’ll show those here:
New Animation Screen for 3/Y
Tesla is rolling out a new startup animation for Tesla Model 3 and Model Y owners. This is present in Launch Edition and Performance Model 3 and Model Y, but other trim levels do not have anything like this.
The new animation screen on Model 3/Y with the 2026 Summer Update
Apparently color will also be customizable: pic.twitter.com/wSdwggtG3S
— TESLARATI (@Teslarati) July 27, 2026
Owners can adjust the color associated with the startup animation to suit their preferences. It is a surprise that more automakers do not focus on this animation for their vehicles; it can be a great first impression piece and make the car immediately feel more luxurious.
Tesla has included this on more premium trims, but it is nice to see it on the Model 3 and Model Y.
Grok Improvements
Grok can now adjust more things in the car outside of the Navigation system. Now, drivers can adjust anything from climate to driving settings by simply speaking to the AI assistant in the car:
@Tesla‘s AI assistant (Grok) with its new vehicle commands in action.
Set the climate, your destination and vehicle settings all in one go! pic.twitter.com/0bBTqaAk6G
— Not a Tesla App (@NotATeslaApp) July 28, 2026
You don’t even have to push a button, either. Instead, you can just say “Hey, Grok,” if you have it enabled. That feature rolled out with the 2026 Spring Update just a few months back.
This is a great feature, especially pertinent for the Robotaxi platform, as there will be no buttons inside the Cybercab when it eventually starts giving rides to the public. It also broadens Grok’s capabilities, which were relatively limited in terms of vehicle setting adjustments beforehand.
Tesla briefly offered one Robotaxi part in its Parts Catalog for your personal car, only to remove it just a short time after it was first noticed.
Tesla’s Robotaxi camera washer apparatus was briefly available for purchase on the company’s Online Parts Catalog. The camera washer was first noticed on Model Y Robotaxi vehicles about six months ago in Austin.
🚨 Tesla looks to have installed Camera Washers on the side repeater cameras on Robotaxis in Austin
pic.twitter.com/xemRtDtlRR— TESLARATI (@Teslarati) January 23, 2026
First noticed by Not a Tesla App, the Camera Washer entries appeared for the new “Juniper” Model Y under a category called “Halo,” which has also now disappeared. Interestingly, Halo probably is related to Tesla’s internal “Project Halo,” which was a project that aimed to retrofit customer-owned Model Ys into functional Robotaxis.
This hardware addition would likely be required for the vehicle to operate as a Robotaxi, as the Camera Washer seems to be a non-negotiable part of the vision-based system Tesla utilizes for self-driving efforts.
However, this part has since been removed and is no longer visible on the EPC.
Now the true question lingers: Why would Tesla add this Camera Washer to the Model Y parts catalog? Is it planning to make it available for owners to utilize on their own cars for personal use, or will it become a prerequisite for Robotaxi operation in customer-owned cars?
While discussing the upgrade options for Hardware 3 vehicles during the Q1 Earnings Call, Tesla CEO Elon Musk had said that the company could establish small, satellite shops that would upgrade cameras and self-driving computers. Perhaps this same strategy could be utilized for vehicles that want to be included in Robotaxi but do not have the correct hardware.
AI4 is currently represented as capable of unsupervised self-driving, and the same was said about HW3 at one point, only for Tesla to admit last quarter that it would, unfortunately, not be possible. Perhaps AI4 vehicles might need this camera washer as a prerequisite, just as HW3 cars will need that camera and computer upgrade.
This could be the first hint of that’s where we are headed.
Tesla has started rolling out a broader change to the ride experience for its Robotaxi fleet by silencing turn signals, but the change is certainly polarizing.
Tesla has generally made it clear that its purpose-built ride-hailing platform, Robotaxi, will cater to the rider in nearly every way possible. This includes having climate preferences, music, and other personal settings loaded up in the car as the rider enters.
But Tesla is taking it a step further by muting turn signal chimes altogether, a change that appears to be a way to make the ride more peaceful:
Tesla has finally turned off the blinker/turn signal noises in their Model Y Robotaxis.
This is a small update, but will definitely be noticeable for riders. It didn’t really make much sense to leave the turn signal sound on when it’s Unsupervised. pic.twitter.com/ITwx60PAMO
— Sawyer Merritt (@SawyerMerritt) July 27, 2026
However, there are a handful of people who are not thrilled about this change. Turn signals are a conditioned part of the human mind for those who ride in a car regularly.
Taking a turn without one feels strange and odd, and not hearing it click while activated could set off some alarms for riders, who might use the noise as confirmation that other drivers know of their intention to turn.
I kind of like it being on, threw me off when riding with Zoox who has had it disabled
— Dan Burkland (@DBurkland) July 27, 2026
Turn signal noises are still audible in customer cars, so if you use FSD in your personal vehicle, you will still hear the turn signal.
The move is certainly one that is unique, but not one that separates it from other ride-sharing services. In a normal car, the clicking sound confirms to the driver that the blinker is active. In a fully driverless Robotaxi, that feedback serves no purpose for passengers, other than peace of mind.
Tesla unlocks in-car web conferencing to extend Google Meet, Teams and beyond
Tesla Summer Update begins rolling out: a look at the new features
