News
Relativity Space’s first 3D-printed rocket booster passes early tests
Relativity Space CEO Tim Ellis says that the startup’s first 3D-printed ‘Terran-1’ rocket booster has already completed a few significant tests after arriving at its Florida launch pad last month.
Terran-1 is an expendable two-stage launch vehicle that, when assembled for the first time, will measure around 33 meters (110 ft) tall, 2.3 meters (7.5 ft) wide, and weigh 9.3 tons (~20,500 lb) empty. Fueled by liquid oxygen and methane (methalox) and powered by nine small Aeon engines, the first Terran booster will produce around 90 tons (~200,000 lbf) of thrust at liftoff. Altogether, the rocket is designed to initially launch up to 1.25 tons (~2750 lb) to low Earth orbit, with plans to expand to 1.5 tons (~3300 lb) in the future. SpaceX’s Falcon 9, for context, measures 3.7 meters (12 ft) wide, 70 meters (~230 ft) tall, likely weighs around 30 tons (~65,000 lb) dry, and can launch 22.8 tons (~50,250 lb) to LEO in an expendable configuration. A single one of its nine Merlin 1D booster engines produces about as much thrust as the entire first stage of Terran-1.
While tiny in comparison, Terran-1’s booster is still a relatively large and powerful rocket, and testing it poses significant challenges. Instead of building a custom test stand elsewhere, Relativity has chosen to conduct almost all first-stage qualification testing at its Cape Canaveral Space Force Station (CCSFS) LC-16 pad.
That plan increases the risk of the rocket damaging Relativity’s only available launch pad, significantly delaying launch preparations, but it also has the potential to save time by doubling as a launch pad shakedown. Aside from basic concrete features and foundations, LC-16 was essentially a blank slate when Relativity arrived, so qualifying the pad – virtually all of which is new and recently installed – is no small feat on its own.
Relativity’s first Terran-1 flight hardware has performed shockingly well. The smaller single-engine upper stage sailed through a full program of proof tests – including a full-duration static fire – shortly before shipping to LC-16. Terran-1’s first booster, meanwhile, left Relativity’s California factory and arrived at LC-16 to begin its own qualification testing in early June.
On June 28th, CEO Tim Ellis revealed that the booster had already completed “pneumatic proof testing” and made it through its “first propellant loading” test less than a month after arriving at LC-16. That would be fast for the first prototype of any new orbital-class rocket, but Relativity’s Terran-1 has an extremely unique feature that makes that speed even more impressive: by mass, the vast majority (85%) of the rocket was manufactured with 3D printing. In effect, most of Terran’s airframe and tanks are just giant, continuous welds that were precisely manipulated into cylinders, domes, and more. While the rough surface finish leaves something to be desired and likely reduces the overall efficiency of the rocket’s airframe, Relativity says that the composition of the metal in its printed structures is almost identical to a more traditionally-manufactured component.
Relativity’s ultimate hope is that the technical groundwork it is laying will allow it to manufacture complex and high-performance rockets with minimal human intervention, drastically lowering production costs. One day, the descendants of those semi-autonomous factories might even be used to construct rockets and other complex machines and infrastructure on Mars or other extraterrestrial destinations.
First, though, the company needs to start successfully launching Terran-1 rockets and fully prove the concept. Up next, Relativity will likely perform a full wet dress rehearsal, a launch simulation in which the rocket is loaded with propellant and pressurized for flight. Once that step is complete, Relativity will attempt one or several static fire tests, culminating in a full-duration multi-minute static fire or “mission duty cycle.”
News
SpaceX’s triple-rocket that launched a Tesla into space is back on a mission
SpaceX Falcon Heavy returns after 18 months away to deliver a satellite that only it could carry.
After an 18-month absence, SpaceX’s Falcon Heavy is returning to mission on Monday morning when it’s scheduled to lift off from Launch Complex 39A at Kennedy Space Center at 10:21 a.m. EDT.
The mission is called ViaSat-3 F3, and the heavy satellite payload needs to reach geostationary orbit, sitting 22,236 miles above Earth where its speed matches the planet’s rotation. Getting a satellite that heavy to that altitude demands more thrust than a single-core Falcon 9 can deliver.
This marks the Falcon Heavy’s 12th flight overall since its debut in February 2018, and its first since NASA’s Europa Clipper mission in October 2024.
Arguably, the most exciting element for spectators will be watching the booster recoveries in action when the two side boosters, B1072 and B1075, will attempt simultaneous landings at Landing Zone 2 and the newer Landing Zone 40 at Cape Canaveral Space Force Station, while the center core will be expended over the ocean.
SpaceX wins its first MARS contract but it comes with a catch
Following satellite deployment, expected roughly five hours after launch, ViaSat-3 F3 will spend several months traveling to its final orbital slot before undergoing in-orbit testing, with service entry expected by late summer 2026
As Teslarati reported, NASA awarded SpaceX a $175.7 million contract on April 16, 2026 to launch the ESA Rosalind Franklin Mars rover aboard a Falcon Heavy no earlier than late 2028, which would mark the first time SpaceX has ever sent a payload to Mars. That contract came on top of an already deep pipeline that includes the Roman Space Telescope, the Dragonfly Saturn mission, and multiple national security payloads.
SpaceX executed 165 missions in 2025 and now accounts for approximately 85% of all global orbital launches. With Starlink surpassing 10 million subscribers and an IPO targeting a $1.75 trillion valuation still ahead, Monday’s launch is one more data point in a company that has quietly become the backbone of both commercial and government space access worldwide.
Tesla is launching its solution to end Supercharger fights once and for all, eliminating any confusion on who is to charge next at a congested location.
Last year, a notable incident at a Tesla Supercharger led to a fight, and it all stemmed from a disagreement over who arrived at the location first.
Congestion at Tesla Superchargers is a pretty infrequent occurrence for most of us, but there are more congested and popular areas where wait times can be extensive. An unfortunate growing pain of EV ownership is the plain fact that chargers are not as available as gas pumps, and there are, at times, lines to charge.
This can cause tensions to flare and people to get entitled when visiting Superchargers. Nobody wants to spend hours at a Supercharger, but now, there will be no more confusion when there is a queue, and that’s thanks to Tesla’s new Virtual Queue for Superchargers.
Tesla is finally starting to build out the Virtual Supercharger Queue, according to Not a Tesla App, but it still relies on drivers to make it work.
When a driver is near a Supercharger that is full, a message will pop up on the Tesla App, using the driver’s location to determine their eligibility to join the virtual queue.
The app states:
“While the app is closed, Tesla uses your location to notify you of accurate wait times at Superchargers when you arrive.”
Another message within the app states:
“There is a waitlist to charge. Are you sure you want to start a charging session now?”
This sounds as if it will require drivers to act appropriately and only plug in when the app prompts them to do so, by letting them know it is their turn.
The app will notify the driver of their position in the queue, as well as how many vehicles are ahead of them.
Tesla launches first ‘true’ East Coast V4 Supercharger: here’s what that means
The company announced a while back that it would be working on a solution for this issue. Personally, I’ve only had to wait at a Supercharger for a charge on one occasion, and there was a line of between 3 and 10 cars during this singular occurrence.
I’m out at the Lancaster, PA Supercharger and showed up with a queue of three vehicles.
It’s now up to five and there have been several issues with order of arrival and confusion about who is first.
Any update on Supercharger queue? @elonmusk @aelluswamy @r_jegaa
— TESLARATI (@Teslarati) January 31, 2026
There were no conflicts or arguments about who had arrived first, but there was some discussion between several drivers during my time there about who was to charge first. Throw a non-Tesla EV into the mix, one that can only charge at a pull-in spot, and that causes even more of a complication.
News
Tesla offers awesome Free Supercharging incentive on an unexpected vehicle
In the past, Tesla has used Free Supercharging to incentivize the purchase of its expensive vehicles, like the Model S and Model X. However, those vehicles are leaving the company lineup, and Tesla saw a benefit from applying the incentive to another car.
Tesla is offering an awesome new Free Supercharging incentive on a vehicle that is sort of unexpected.
In the past, Tesla has used Free Supercharging to incentivize the purchase of its expensive vehicles, like the Model S and Model X. However, those vehicles are leaving the company lineup, and Tesla saw a benefit from applying the incentive to another car.
Tesla North America has introduced a compelling new incentive aimed at boosting Model 3 sales. Starting with orders placed on or after April 24, buyers of the Model 3 Premium (Long Range) and Performance variants in the United States will receive one full year of complimentary Supercharging.
The offer applies exclusively to new vehicle orders and does not extend to existing owners or other trims like the base Rear-Wheel Drive model.
New orders of Model 3 Premium & Performance now come with 1 year of free Supercharging 🇺🇸
Also, all Teslas pay the lowest Supercharging rates – all others pay a ~40% premium or need a subscription
— Tesla North America (@tesla_na) April 24, 2026
The announcement underscores Tesla’s continued dominance in EV charging infrastructure.
While the incentive provides 12 months of zero-cost access to the Supercharger network, Tesla also reiterated its pricing structure: all Tesla vehicles receive the lowest Supercharging rates.
Non-Tesla EVs, by contrast, pay approximately 40 percent more per kWh or must purchase a subscription to access the network at standard rates. This tiered approach highlights the strategic value of owning a Tesla, where seamless integration with the world’s largest and most reliable fast-charging network remains a key differentiator.
For prospective buyers, the savings can be substantial. Depending on driving habits, a typical Model 3 owner might log 12,000–15,000 miles annually.
With average Supercharging costs around $0.40–$0.50 per kWh, one year of free sessions could translate to $800–$1,200 in avoided expenses.
That effectively lowers the total cost of ownership and makes long-distance travel more affordable from day one. Early delivery customers have already noted similar past incentives, with one Cybertruck owner reporting over $2,400 saved in just six months under similar offers that Tesla has deployed in the past.
The timing of the offer appears strategic. Tesla faces growing competition from other automakers expanding their own charging networks and offering aggressive EV incentives.
By bundling free Supercharging rather than discounting the vehicle’s MSRP, Tesla preserves perceived value while directly addressing one of the biggest barriers for new EV adopters: charging costs and convenience.
The move also encourages higher-mileage use of the network, generating valuable real-world data for Tesla’s autonomous driving development.
Why Tesla would apply this incentive to the Model 3 is pretty interesting. It usually is a pretty good incentive to move units out the door, so there’s some speculation whether Tesla is planning to launch new upgrades to the mass-market sedan in the coming months, and the company wants to move what will be outdated units from its inventory.
However, there is also just the idea that Tesla could be attempting to stimulate some early quarter demand for the Model 3, especially as the Model Y continues to sell very well. Tesla’s loss of the $7,500 EV tax credit last year had an impact on sales, and Tesla might be testing some formidable options to see if it can add some demand once again.
SpaceX’s triple-rocket that launched a Tesla into space is back on a mission
The FCC just said ‘No’ to SpaceX for now
