News
Tesla’s 3rd location for next-gen EV production to be named end of 2024-early 2025
Tesla’s Q4 and FY 2023 earnings call provided a number of key details about the next-generation platform. The vehicle is expected to be built in volumes that far exceed the Model 3 and Model Y, and it is also expected to be priced at a level that would make it competitive even against vehicles like the Toyota Corolla and the Honda Civic.
During Tesla’s 2022 Investor Day event, the company stated that the next-generation vehicle would utilize an “Unboxed Process” that should make it significantly more efficient to build. Tesla has an aspirational target of hitting 20 million vehicles per year in 2030. The next-generation platform would likely comprise a notable portion of this target.
During Tesla’s Q4 and FY 2023 earnings call, CEO Eon Musk stated that the company is “very far along” on its next-generation low-cost vehicle program. And while he noted that the company would not be discussing details of the new vehicle during the call, he did state that Tesla’s next-generation platform would be profound, both in terms of vehicle design and its manufacturing system.
“This is a revolutionary manufacturing system… far more advanced than any other automotive manufacturing system in the world, like, by a significant margin. Several years ago, I said that perhaps the most important competitive characteristic of Tesla in the future will be manufacturing technology, and you will really see that come to bear with our next-gen vehicle,” Musk said.
As for the production locations of Tesla’s next-generation vehicle, Musk noted that Giga Texas will be first, followed by Giga Mexico. A third location would also be named, though it would be announced around the end of the year to early 2025. Musk also teased that the third location for the upcoming vehicle’s production would be outside North America.
“The first manufacturing location for this will be at our Gigafactory and headquarters in Austin, Texas. And then, we’ll follow that up with other locations around the world. Probably the factory that will be built in Mexico will be second, and then we’ll be looking to identify a third location, perhaps, by the end of this year or early next outside of North America,” Musk said.
The next-generation vehicle would be Tesla’s most ambitious yet, and the company seems to be preparing for the challenges that would be coming with its development. Musk stated as much during the earnings call when he noted that Giga Texas is the vehicle’s first manufacturing location because engineers have to quite literally live in the production line to develop and refine it.
“There’s a lot of new technology, like, a tremendous amount of new, revolutionary manufacturing technology here. The reason I want to put this new, revolutionary manufacturing line at Giga Texas was because we really need the engineers to be living on the line. This is not sort of an off-the-shelf, you know, “just works” type of thing. And it’s just a lot easier for Tesla engineering to live on the line if it’s in Austin versus elsewhere.
“But we are currently expecting to start production (in the) second half (of) next year. That will be a challenging production ramp. Like, I will be sleeping on the line practically. In fact, not practically — we will be. But I am confident that once it is going, it will be head and shoulders above any other manufacturing technology that exists anywhere in the world. It’s next level,” Musk said.
Don’t hesitate to contact us with news tips. Just send a message to simon@teslarati.com to give us a heads up.
News
Tesla Cybercab display highlights interior wizardry in the small two-seater
Photos and videos of the production Cybercab were shared in posts on social media platform X.
The Tesla Cybercab is currently on display at the U.S. Department of Transportation in Washington, D.C., and observations of the production vehicle are highlighting some of its notable design details.
Photos and videos of the production Cybercab were shared in posts on social media platform X.
Observers of the Cybercab display unit noted that the two-seat Robotaxi provides unusually generous legroom for a vehicle of its size. Based on the vehicle’s video, the compact two-seater appears to offer more legroom than Tesla’s larger vehicles such as the Model Y, Model X, and Cybertruck.
The Cybercab’s layout allows Tesla to dedicate nearly the entire cabin to passengers. The vehicle is designed without a steering wheel or pedals, which helps maximize interior space.
Footage from the display also highlights the Cybercab’s large center screen, which is positioned prominently in front of the passenger bench. The display appears intended to provide entertainment and ride information while the vehicle operates autonomously.
Images of the vehicle also show an additional camera integrated into the Cybercab’s C-pillar. The extra camera appears to expand the vehicle’s field of view, which would be useful as Tesla works toward fully unsupervised Full Self-Driving.
Tesla engineers have previously explained that the Cybercab was designed to be highly efficient both in manufacturing and in operation. Cybercab Lead Engineer Eric E. stated in 2024 that the Robotaxi would be built with roughly half the number of parts used in a Model 3 sedan.
“Two seats unlocks a lot of opportunity aerodynamically. It also means we cut the part count of Cybercab down by a substantial margin. We’re gonna be delivering a car that has roughly half the parts of Model 3 today,” the Tesla engineer said.
The Tesla engineer also noted that the Cybercab’s cargo area can accommodate multiple golf bags, two carry-on suitcases, and two full-size checked bags. The trunk can also fit certain bicycles and a foldable wheelchair depending on size, which is quite impressive for a small car like the Cybercab.
Elon Musk
Elon Musk’s xAI wins permit for power plant supporting AI data centers
The development was reported by CNBC, citing confirmation from the Mississippi Department of Environmental Quality (MDEQ).
Mississippi regulators have approved a permit allowing Elon Musk’s artificial intelligence company xAI to construct a natural gas power plant in Southaven. The facility is expected to support the company’s expanding AI infrastructure tied to its Colossus data center operations near Memphis.
The development was reported by CNBC, citing confirmation from the Mississippi Department of Environmental Quality (MDEQ).
According to the report, regulators “voted to approve the permit” of xAI subsidiary MZX Tech LLC to construct a power plant featuring 41 natural gas-burning turbines “after careful consideration of all public comments and community concerns.”
The Mississippi Department of Environmental Quality stated that the permit followed a regulatory review process that included public comments and community input. Jaricus Whitlock, air division chief for the MDEQ, stated that the project met all applicable environmental standards.
“The proposed PSD permit in front of the board today not only meets all state and federal permitting regulations, but goes above and beyond what is required by law. MDEQ and the EPA agree that not a single person around our facilities will be exposed to unhealthy levels of air pollution,” Whitlock stated.
The planned facility will help provide electricity for xAI’s AI computing infrastructure in the Memphis region.
The Southaven project forms part of xAI’s efforts to scale computing capacity for its artificial intelligence systems.
The company currently operates two major data centers in Memphis, known as Colossus 1 and Colossus 2, which provide computing power for xAI’s Grok AI models. xAI is also planning to build another large data center in Southaven called Macrohardrr, which would be located in a warehouse previously used by GXO Logistics.
Large-scale AI training requires substantial computing power and electricity, prompting technology companies to develop dedicated energy infrastructure for their data centers.
SpaceX President Gwynne Shotwell previously stated that xAI plans to develop 1.2 gigawatts of power capacity for its Memphis-area AI supercomputer site as part of the federal government’s Ratepayer Protection Pledge. The commitment was announced during an event with United States President Donald Trump.
“As part of today’s commitment, we will take extensive additional steps to continue to reduce the costs of electricity for our neighbors. xAI will therefore commit to develop 1.2 GW of power as our supercomputer’s primary power source. That will be for every additional data center as well. We will expand what is already the largest global Megapack power installation in the world,” Shotwell said.
“The installation will provide enough backup power to power the city of Memphis, and more than sufficient energy to power the town of Southaven, Mississippi where the data center resides. We will build new substations and invest in electrical infrastructure to provide stability to the area’s grid.”
Elon Musk
Tesla China teases Optimus robot’s human-looking next-gen hands
The image was shared by Tesla AI’s account on Weibo and later reposted by Tesla community members on X.
A new teaser shared by Tesla’s China team appears to show a pair of unusually human-like hands for Optimus.
The image was shared by Tesla AI’s account on Weibo and later reposted by Tesla community members on X.
As could be seen in the teaser image, the new version of Optimus’ hands features proportions and finger structures that look strikingly similar to those of a human hand. Their appearance suggests that they might have dexterity approaching that of a human hand.
If the image reflects a new generation of Optimus’ hands, it could indicate Tesla is continuing to refine one of the most critical components of its humanoid robot.
Hands are widely viewed as one of the most difficult engineering challenges in robotics. For Optimus to perform complex real-world work, from manufacturing tasks to household activities, its hands would need to be the best in the industry.
Elon Musk has repeatedly described Optimus as Tesla’s most important long-term product. In posts on social media platform X, Musk has stated that Optimus could eventually become the first real-world Von Neumann machine.
In theory, a Von Neumann machine is a self-replicating system capable of building copies of itself using available materials. The concept was originally proposed by mathematician John von Neumann in the mid-20th century.
“Optimus will be the first Von Neumann machine, capable of building civilization by itself on any viable planet,” Musk wrote in a post on X.
If Optimus is expected to carry out complex work autonomously in the future, high levels of dexterity will likely be essential. This makes the development of advanced robotic hands a key step towards Musk’s long-term expectations for the product.
Tesla Cybercab display highlights interior wizardry in the small two-seater
Elon Musk’s xAI wins permit for power plant supporting AI data centers
