Connect with us

News

Rocket Lab successfully launches the ‘Beginning of the Swarm’ mission

Electron launches the Beginning of the Swarm mission from New Zealand (Credit Rocket Lab)

Published

on

Rocket Lab successfully launched the “Beginning of the Swarm” mission, its 47th overall yesterday.

Electron took the skies at 10:32 am NZT from Launch Complex 1B on the Mahia Peninsula in New Zealand, sending two small payloads to vastly different orbits.

The launch was originally scheduled for 10:15 a.m. NZT, just 2 minutes before a Falcon 9 mission from Florida, but it held at t – 12 minutes as the Rocket Lab team worked on a ground support system issue. It didn’t take long for teams to work on the issue, and Electron launched safely from LC-1B.

Advertisement

The primary payload was NEONSAT-1 for the Korea Advanced Institute of Science and Technology and Satellite Technology Research Center. This is the first of an eventual 11-satellite constellation. The satellite features a high-resolution camera that will monitor the Korean peninsula and help with recovery after natural disasters.

NEONSAT-1 was deployed into a 520 km circular orbit 50 minutes after lift-off.

The secondary payload was NASA’s Advanced Composite Solar Sail System (ACS3). This satellite is meant to test new materials for the boom that deploys the sail itself. Once deployed, it is about the size of a small apartment.

ACS-3 was deployed into a much higher orbit than NEONSAT-1 thanks to the abilities of the Electron Kick Stage, which ignited 3 times with one final burn to circularize the orbit and deploy the satellite at 1000 km nearly an hour after the first payload deployment.

While Rocket Lab did not recover the Electron first stage, they confused many viewers when it was revealed that the first stage featured the red and silver look that is used on recovery missions.

However, as Rocket Lab is progressing towards full first-stage re-usability, these Electrons are now in the standard production flow, according to the company. Yesterday’s mission required Electron to be expended.

Next up for Rocket Lab is likely a dedicated launch for Capella Space, which will launch an Acadia synthetic aperture radar (SAR) satellite with a to-be-confirmed launch date.

Disclosure: Richard Angle is not an RKLB shareholder.

Advertisement

Questions or comments? Shoot me an email at rangle@teslarati.com, or Tweet me @RDAnglePhoto.

Launch journalist, specializing in launch photography. Based on the Space Coast, a short drive from Cape Canaveral and the SpaceX launch pads.

Advertisement
Comments

Investor's Corner

Cantor Fitzgerald raises Tesla PT To $510, citing Cybercab, Semi, and AI momentum

The firm cited upcoming production milestones for the Cybercab, Semi, and Optimus as key drivers behind its revised valuation.

Published

on

Credit: Tesla Asia/X

Cantor Fitzgerald has boosted its Tesla (NASDAQ:TSLA) price target from $355 to $510 per share, maintaining an “Overweight” rating over its continued confidence in the company’s long-term growth. 

Analyst Andres Sheppard cited upcoming production milestones for the Cybercab, Semi, and Optimus as key drivers behind Cantor Fitzgerald’s revised valuation, as well as expanding opportunities in Tesla’s Energy and Full Self-Driving initiatives.

Major growth from multiple Tesla programs

According to Sheppard, Tesla disclosed that volume production for the Cybercab, Semi, and Megapack 3 is on track for fiscal year 2026, with Optimus production lines also targeted to launch next year. The analyst highlighted these updates as “significant,” noting that Tesla’s diverse roadmap continues to reinforce its position as a vertically integrated energy and AI company.

Cantor Fitzgerald now expects Tesla’s capital expenditures at approximately $9.2 billion for FY2025 and around $12 billion for FY 2026, a substantial increase tied to the company’s efforts to further scale its operations. The analyst noted that these investments align with Tesla’s push into robotics, autonomous driving, and energy storage.

Confidence in AI-driven expansion

Tesla shares closed at $433.72 last Friday, giving Cantor Fitzgerald’s $510 price target an implied upside of roughly 17.6%. The revised forecast reflects the firm’s expectation that Tesla’s long-term value extends far beyond vehicle sales, with strong upside from the company’s FSD, Robotaxi/Cybercab, Semi, and Optimus initiatives, as noted in a StreetInsider report.

Advertisement

“Overall, we remain bullish on TSLA over the medium to long term,” Sheppard wrote. “We continue to see meaningful future upside from Energy Storage & Deployment, FSD, Robotaxis/Cybercab, Semis, and Optimus Bots.”

Tesla highlighted these key initiatives in its Q3 2025 Update Letter. “We continue to evolve and augment our product lineup with a focus on cost, scale and future monetization opportunities via services powered by our AI software. Cybercab, Tesla Semi and Megapack 3 are on schedule for volume production starting in 2026,” the company wrote.

Continue Reading

News

Tesla is ramping its hiring for Cybercab vehicle manufacturing roles

A check of the company’s Careers website shows 30 open positions tied to the Cybercab project, with 25 focused directly on vehicle manufacturing.

Published

on

Credit: Tesla/YouTube

Tesla is accelerating preparations for its upcoming Cybercab by rapidly expanding its hiring efforts in Austin, Texas. 

A check of the company’s Careers website shows 30 open positions tied to the Cybercab project, with 25 focused directly on vehicle manufacturing. The spike in listings suggests that Tesla may be gearing up for a production ramp of its fully autonomous two-seater at Giga Texas.

New Cybercab job listings

Tesla’s Careers page now features several new roles that appear crucial to the Cybercab’s buildout. Among the most recent additions are openings for Engineering Technicians for the Cybercab’s drive units, battery pack, and general assembly, as well as positions for Equipment Technicians for the vehicle’s production lines.

Earlier this month, Tesla only had three openings related to the autonomous two-seater’s manufacturing. Even then, it was already exciting as the Cybercab would be produced using Tesla’s “Unboxed” manufacturing process. This process is designed to make the Cybercab easier and quicker to produce. 

Similar to previous Cybercab-related job listings, all of the openings are currently based in Austin, Texas. This suggests that for now, at least, the production of the Cybercab will really be focused on Giga Texas to start.

Advertisement

Ultra-fast Cybercab production targets

Tesla CEO Elon Musk has described the Cybercab as the company’s highest-volume vehicle yet, targeting an annual production rate of around 2 million units. He added that the Cybercab line will operate more like a “high-speed consumer electronics” assembly process than a conventional car factory.

“If you’ve seen the design of the Cybercab line, it doesn’t look like a normal car manufacturing line,” Musk said earlier this year. “It looks like a really high-speed consumer electronics line. In fact, the line will move so fast that actually people can’t even get close to it.”

Continue Reading

Elon Musk

Memphis to use xAI taxes for neighborhood improvements: “Truly a blessing”

City officials confirmed that the funds will be reinvested in local neighborhoods near xAI’s Colossus supercomputer.

Published

on

Credit: xAI/X

The City of Memphis has collected all taxes owed by Elon Musk’s xAI before the payment deadline, creating a $3.2 million special revenue fund to support communities affected by the company’s operations. 

City officials confirmed that the funds will be reinvested in local neighborhoods near xAI’s Colossus supercomputer.

Directing xAI funds toward community projects

Mayor Paul Young’s administration recently outlined how the funds will be allocated. The initiative was focused on improving infrastructure and quality of life in neighborhoods impacted by xAI’s construction and operations. 

Councilwoman Yolanda Cooper-Sutton emphasized that the process will include public input, with surveys already distributed to residents to guide spending priorities, according to ABC24.

“With that ordinance, we are in the near future getting ready to set up the committee because this is the people’s money,” Cooper-Sutton said. “We wanna make sure that it is used for the people.”

Advertisement

Officials noted that they are planning to present a final proposal to the entire council after reviewing community feedback. Cooper-Sutton added that the program represents a step toward ensuring businesses operating in Memphis treat residents “fairly and with equality.”

“It is truly, truly a blessing. What we are doing here at this body and this council, we wanna make sure that whatever business that comes here, that the people are treated fairly and with equality,” she stated. 

xAI partnership fuels local job opportunities

Beyond tax revenue, xAI’s growing presence is expected to bolster Memphis’ workforce development goals. Earlier this month, the artificial intelligence startup co-hosted a job fair at Crosstown Concourse with the American Job Center to connect residents with new employment pathways.

“We know that jobs are coming. We know that talent is here,” Melody Freemon, executive director of the Greater Memphis Workforce Development Board, stated. “We wanna make sure we’re not just putting people in any ole jobs. We wanna put people on a pathway to self-sustainability. We wanna put people on a pathway to self-sustainability and something they can rely on in the future.”

Freemon also noted that the Greater Memphis Workforce Development Board was able to make a favorable offer to xAI. “We promised that we can provide a pipeline. This is the central hub for connection. This is where job seekers are, so let us take the headache off of your hiring needs. Come here, let us source the people and make sure that we meet the demand,” Freeman stated.

Advertisement
Continue Reading

Trending