News
SpaceX’s Crew Dragon spaceship nears first orbital launch test
After roughly five years of concerted development, SpaceX CEO Elon Musk has released the first official photo of the company’s Crew Dragon, a version of their orbital spacecraft designed and optimized to reliably return humans to orbit from United States soil.
Traceable back to the very beginning of SpaceX’s first Dragon development program, where the company hoped to easily modify the Cargo Dragon capsule design to support crewed missions, the results of the years of work that followed instead focused on an extensive redesign originally intended to be capable of powered landings similar to Falcon 9 boosters. However, likely the result of an immense certification burden to ever hope to have NASA okay its operational usage, SpaceX chose to kill the landing program in favor of a more traditional ocean splashdown style of return. Extendable leglets were thus removed from the design’s heat shield, a change that also ended any hopes of SpaceX’s plans to partner with NASA and land an unprecedented payload on the surface of Mars, known as Red Dragon.
- Elon Musk: “SpaceX Crew Dragon ship in anechoic chamber for EMI [electromagentic interference] testing before being sent to @NASA Plum Brook vacuum chamber” (SpaceX)
- CRS-14’s flight-proven Cargo Dragon captured on orbit in April 2018 by astronaut Oleg Artemyev. (NASA/Oleg Artemyev)
- A reused orbital spacecraft, Cargo Dragon, back on Earth after its second successful resupply mission. (SpaceX)
That announcement came in the summer of 2017. Ten quiet months later, Musk confirmed April updates from NASA’s Commercial Crew Program managers with a photo of the first flight-worthy Crew Dragon in SpaceX’s anechoic chamber, ahead of shipment to NASA’s Plum Brook facility for full-up spacecraft testing in vacuum conditions.
While it may look like a completely different design, much of Crew Dragon has a significant level of heritage with the readily flight-proven Cargo Dragon spacecraft, including avionics, parachutes, heat shield expertise, and Draco maneuvering thrusters. The most obvious difference can be found in the four black bays spaced evenly around the edge of the capsule – these contain two SuperDraco thrusters each (eight total) that together act as an integrated launch abort system, capable of launching the capsule and trunk to safety in fractions of a second in the event of Falcon 9 failure at any point during launch. A test of this hardware was first completed almost exactly three years ago, demonstrating acceleration from stand-still to 100 mph in less than a single second.
The hardware shown in Elon Musk’s photo is not intended to carry humans (not on its first flight, at least), instead aiming to be the first Crew Dragon article to make it into Earth orbit, where SpaceX technicians and engineers will conduct and observe a vast fleet of tests with the intent of proving the craft’s capabilities. If successful, this mission (known as DM-1) will be the final step SpaceX needs to complete before DM-2, the upgraded spacecraft’s first real crewed mission.
As of now, DM-1 and DM-2 are officially scheduled for no earlier than (NET) August 31 and December 31 respectively. However, those dates are very unlikely to hold. Per sources with knowledge of Crew Dragon’s progress, DM-2 is currently scheduled for launch NET 2019, likely sometime in the first or second quarter. DM-1, while certainly not ready for an August 31 launch, does appear to be tracking towards a launch later this year, most likely in Q4 2018. SpaceX technicians are working around the clock to ready this groundbreaking hardware for its trip to Plum Brook and eventually to space, spending long shifts in the belly of the Dragon to ensure everything is working as intended.
- Falcon 9 Block 5 completed its first launch on May 11, carrying the Bangabandhu-1 communications satellite to geostationary transfer orbit. (Tom Cross)
- SpaceX’s first successfully launched and landed Block 5 Falcon 9, May 2018. (Tom Cross)
- B1046 returned to Port Canaveral shortly after its May 4 debut, and is now being carefully analyzed as pathfinder hardware. (Tom Cross)
Falcon 9 Block 5, which successfully completed its inaugural launch earlier this month, is another critical path for SpaceX’s first crewed mission (DM-2). As of now, NASA’s Aerospace Safety Advisory Panel (ASAP) has advised NASA to require seven full-up successful launches of the Block 5 iteration before allowing crew to fly on the rocket. In order for SpaceX to achieve that milestone in time for a crewed launch in early 2019, Falcon 9 Block 5 will need to fly (and refly) flawlessly over the course of the second half of 2018. While unclear if ASAP will accept flight-proven launches of the upgraded rocket for its fairly arbitrary “seven launches” requirement, SpaceX will need to rely heavily on Block 5 reflights if they hope to complete as many as 30 launches total this year.
As of now, the next launch of Falcon 9 Block 5 is likely to occur sometime in June, with three total Block 5 flights tentatively scheduled before mid-July. If SpaceX can pull those launches off, it will act as a huge bode of confidence for the future of the rocket, as well as the future of Crew Dragon.
Follow us for live updates, behind-the-scenes sneak peeks, and a sea of beautiful photos from our East and West coast photographers.
Teslarati – Instagram – Twitter
Tom Cross – Twitter
Pauline Acalin – Twitter
Eric Ralph – Twitter
News
Tesla Model X shocks everyone by crushing every other used car in America
The Model X is one of Tesla’s flagship models, the other being the Model S. Earlier this year, Tesla confirmed it would discontinue production of both the Model S and Model X to make way for Optimus robot production at the Fremont Factory in Northern California.
The Tesla Model X was the fastest-selling used vehicle in the United States in the first quarter of the year, crushing every other used car in America.
iSeeCars data for the first quarter shows that the Model X was the fastest-selling used car, lasting just 25.6 days on the market on average, two days better than that of the second-place Lexus RX 350h. The Cybertruck, Model Y, and Model S, in seventh, ninth, and thirteenth place, respectively, also made the list.
The Model X is one of Tesla’s flagship models, the other being the Model S. Earlier this year, Tesla confirmed it would discontinue production of both the Model S and Model X to make way for Optimus robot production at the Fremont Factory in Northern California.
Tesla brings closure to flagship ‘sentimental’ models, Musk confirms
Bringing closure to these two vehicles signaled the end of the road for the cars that have effectively built Tesla’s reputation for luxury and high-end passenger vehicles.
Relying on the sales of its mass market Model Y and Model 3, as well as leaning on the success of future products like the Cybercab, is the angle Tesla has chosen to take.
Teslas are also performing extremely well as a whole on the resale market. iSeeCars data shows that, “while the average price of a 1- to 5-year-old non-Tesla EV fell 10.3% in Q1 2026 year-over-year, the average price of a used Tesla was essentially flat at 0.1% lower across the same period. Traditional gas car prices dropped 2.8% during this same period.”
Additionally, market share for gas cars has dropped nearly 3 percent since the same quarter last year. Tesla has remained level, while the non-Tesla EV market share has increased 30 percent, mostly due to more models available.
Nevertheless, those non-Tesla EVs have seen their value drop by over 10 percent, while Tesla’s values have remained level.
Executive Analyst Karl Brauer said:
“Used electric vehicles without a Tesla badge have lost more than 10% of their value in the past year. This compares to stable values for Teslas and hybrids, and a modest 2.8% drop for traditional gasoline vehicles.”
Teslas, as well as non-luxury hybrids, are displaying the strongest resistance in the face of faltering demand, the publication says. But the more impressive performance is that of the Model X alone.
Tesla’s decision to stop production of the Model X may have played some part in the vehicle’s pristine performance in Q1. With the car already placed at a premium price point, used models are already more appealing to consumers. Perhaps second-hand versions were more than enough for those who wanted a Model X, and only a Model X.
Cybertruck
Tesla Cybertruck’s head-scratching trim sold terribly, recall documents reveal
The head-scratching offering was only available for a few months, and evidently, it did not sell very well, which we all suspected. New recall documents on the vehicle from the National Highway Traffic Safety Administration (NHTSA) now reveal just how poorly it sold.
After Tesla decided to build a Rear-Wheel-Drive Cybertruck trim back in 2025, which was void of many features and only featured a small discount.
The head-scratching offering was only available for a few months, and evidently, it did not sell very well, which we all suspected. New recall documents on the vehicle from the National Highway Traffic Safety Administration (NHTSA) now reveal just how poorly it sold.
The recall deals with a potentially separating wheel stud and potentially impacts 173 Cybertruck units with the 18-inch steel wheels. The Cybertruck RWD was the only trim level to feature these, and the 173 potentially impacted units represent a portion of the population of pickups. Therefore, it’s not the entire number of RWD Cybertruck sold, but it could show how little interest it gathered.
The NHTSA document states:
“On affected vehicles, higher severity road perturbations and cornering may strain the stud hole in the wheel rotor, causing cracks to form. If cracking propagates with continued use and strain, the wheel stud could eventually separate from the wheel hub.”
Only 5 percent are expected to be impacted, meaning less than 10 units will have the issue if the NHTSA and Tesla estimates are correct. Nevertheless, the true story here is how terribly the RWD Cybertruck sold.
Tesla ended production and stopped offering the RWD Cybertruck to customers last September. For just $10,000 less than the All-Wheel-Drive trim, Tesla offered the RWD Cybertruck with just one motor, textile seats instead of leather, only 7 speakers instead of 15, no Rear Touchscreen, no Powered Tonneau Cover for the truck bed, and no 120v/240v outlets.
For just $10,000 more, at $79,990, owners could have received all of those premium features, as well as a more capable All-Wheel-Drive powertrain that featured Adaptive Air Suspension. The discount simply was not worth the sacrifices.
Orders were few and far between, and sources told us that when it was offered, sales were extremely tempered because customers could not see the value in this trim level.
Even Tesla’s most loyal supporters thought the offering was kind of a joke, and the $10,000 extra was simply worth it.
News
Tesla Semi sends clear message to Diesel rivals with latest move
The truck is being built at a dedicated facility in Sparks, Nevada, just next to its Gigafactory Nevada facility.
Tesla has officially launched Semi production at what will be a mind-boggling rate of approximately 50,000 units per year.
The truck is being built at a dedicated facility in Sparks, Nevada, just next to its Gigafactory Nevada facility.
The company finally announced on April 29 that the first Tesla Semi truck has rolled off its new high-volume production line at the factory. This marks the transition from limited pilot builds to scaled manufacturing for the Class 8 all-electric heavy-duty truck, nearly nine years after its dramatic 2017 unveiling.
🚨 Tesla Semi mass production is underway in Nevada!
HUGE! https://t.co/ohgQIiI2bK pic.twitter.com/23GvWr8D27
— TESLARATI (@Teslarati) April 29, 2026
Tesla initially promised high-volume deliveries by 2019–2020, but battery supply constraints and prioritization for passenger vehicles delayed progress. The new 1.7-million-square-foot factory, purpose-built next to Gigafactory Nevada’s 4680 cell production lines, resolves those bottlenecks through deep vertical integration.
The Semi uses Tesla’s structural battery packs with cylindrical 4680 cells manufactured on-site. This integration enables efficient supply, reduced logistics costs, and the potential for high output. The factory is designed for an eventual annual capacity of approximately 50,000 trucks, positioning Tesla to address growing demand in long-haul freight electrification.
Tesla is using a redesigned Cybertruck battery cell to mitigate Semi challenges
Operating economics favor the Semi through dramatically lower fuel and maintenance costs compared to traditional diesel rigs, and companies involved in a pilot program for the Semi with Tesla have shown that.
Electricity is far cheaper than diesel on a per-mile basis, while the electric powertrain features fewer moving parts, reducing service intervals and lifetime expenses. Early deployments with customers like PepsiCo and others have validated these advantages in real-world service.
The Nevada factory’s ramp-up is targeted for full volume output before the end of June 2026, aligning with broader Tesla production goals for 2026. This includes parallel efforts on other new vehicles while expanding the Megacharger infrastructure to support widespread adoption.
By localizing battery and truck production, Tesla gains advantages in cost, quality control, and scalability that many competitors sourcing cells externally lack. The start of high-volume Semi production represents a pivotal step in Tesla’s strategy to electrify heavy transportation, potentially accelerating the shift toward zero-emission freight across North America and beyond.
As output increases, the Semi could reshape long-haul logistics with its combination of performance, efficiency, and sustainability.






