News
The Boring Company’s updated projects page no longer lists D.C.-Baltimore tunnel
The Boring Company’s updates to its official website have removed references to some of the tunneling startup’s announced projects, such as the D.C.-Baltimore tunnel and the Dugout Loop in Los Angeles. In the case of the D.C.-Baltimore project, a spokesperson from the Federal Highway Administration has stated that The Boring Company has not given the agency any indications that it intends to move forward with the project.
The D.C.-Baltimore tunnels were first outlined in 2017, and it even received some notable support from Maryland Gov. Larry Hogan. A conditional permit for the initiative was later granted by state officials. The state also aided The Boring Company in submitting a draft environmental assessment to the highway administration, which was released in 2019. Elon Musk, for his part, noted on Twitter that The Boring Company has received verbal government approval for an “underground NY-Phil-Balt-DC Hyperloop” that would allow travel from N.Y. to D.C. in 29 minutes.
In a statement to The Washington Post, Doug Hecox, a spokesperson for the highway administration, said that the agency has not taken any actions about the tunnels “because we haven’t gotten any indication from the company that they are interested in moving forward with the project.” Hecox also highlighted that at this point, the decision about whether the project would move forward, or any timetable for that matter, lies with the Boring Company.
Before its website’s recent update, The Boring Company listed the D.C.-Baltimore tunnel’s status as “In environmental review and permitting.” The same was true for the Dugout Loop, a project in Los Angeles aimed at transporting baseball fans and concertgoers from the Los Feliz, East Hollywood, or Rampart Village areas to the Dodger Stadium. Following its website’s recent update, The Boring Company only included projects that have been completed or are currently in construction, such as the LVCC Loop and the Vegas Loop.
The Boring Company has not shared the reasons behind the removal of the D.C.-Baltimore tunnel from its official website. Though considering the tunneling startup’s focus on refining its mass transportation technologies in the LVCC Loop for now, the removal of the D.C.-Baltimore project makes sense. The project would likely involve about 220 miles of tunnels, after all, and it is also designed to deploy Hyperloop technology. To achieve Elon Musk’s 29-minute New York to Washington, D.C. estimate, the Hyperloop pods would have to travel about 450 mph.
But as noted by Maryland Stadium Authority director Michael Frenz, the absence of updates about The Boring Company’s D.C.-Baltimore tunnel does not mean that the project would not be moving forward in the future. “I didn’t think it was necessarily something that was going to happen right away,” he said. Perhaps with more experience and a more mature mass transportation system, The Boring Company could start revisiting more ambitious projects like the D.C.-Baltimore tunnel.
Do you have anything to share with the Teslarati Team? We’d love to hear from you, email us at tips@teslarati.com or reach out to me at maria@teslarati.com.
-
Tesla has started to deploy the 2026 Summer Update to owners across its fleet, and among the biggest changes are improvements to Navigation, a new startup animation for the Model 3 and Model Y, Caraoke scoring, and new capabilities for Grok.
As the update has started making its way to some cars, we can now see a few of the features operating in real-time. We will show you what some of the new features look like in this article, along with some additional details on what changed.
Not all of the new features in the 2026 Summer Update have quite made an appearance, but some of them have, so we’ll show those here:
New Animation Screen for 3/Y
Tesla is rolling out a new startup animation for Tesla Model 3 and Model Y owners. This is present in Launch Edition and Performance Model 3 and Model Y, but other trim levels do not have anything like this.
The new animation screen on Model 3/Y with the 2026 Summer Update
Apparently color will also be customizable: pic.twitter.com/wSdwggtG3S
— TESLARATI (@Teslarati) July 27, 2026
Owners can adjust the color associated with the startup animation to suit their preferences. It is a surprise that more automakers do not focus on this animation for their vehicles; it can be a great first impression piece and make the car immediately feel more luxurious.
Tesla has included this on more premium trims, but it is nice to see it on the Model 3 and Model Y.
Grok Improvements
Grok can now adjust more things in the car outside of the Navigation system. Now, drivers can adjust anything from climate to driving settings by simply speaking to the AI assistant in the car:
@Tesla‘s AI assistant (Grok) with its new vehicle commands in action.
Set the climate, your destination and vehicle settings all in one go! pic.twitter.com/0bBTqaAk6G
— Not a Tesla App (@NotATeslaApp) July 28, 2026
You don’t even have to push a button, either. Instead, you can just say “Hey, Grok,” if you have it enabled. That feature rolled out with the 2026 Spring Update just a few months back.
This is a great feature, especially pertinent for the Robotaxi platform, as there will be no buttons inside the Cybercab when it eventually starts giving rides to the public. It also broadens Grok’s capabilities, which were relatively limited in terms of vehicle setting adjustments beforehand.
Tesla briefly offered one Robotaxi part in its Parts Catalog for your personal car, only to remove it just a short time after it was first noticed.
Tesla’s Robotaxi camera washer apparatus was briefly available for purchase on the company’s Online Parts Catalog. The camera washer was first noticed on Model Y Robotaxi vehicles about six months ago in Austin.
🚨 Tesla looks to have installed Camera Washers on the side repeater cameras on Robotaxis in Austin
pic.twitter.com/xemRtDtlRR— TESLARATI (@Teslarati) January 23, 2026
First noticed by Not a Tesla App, the Camera Washer entries appeared for the new “Juniper” Model Y under a category called “Halo,” which has also now disappeared. Interestingly, Halo probably is related to Tesla’s internal “Project Halo,” which was a project that aimed to retrofit customer-owned Model Ys into functional Robotaxis.
This hardware addition would likely be required for the vehicle to operate as a Robotaxi, as the Camera Washer seems to be a non-negotiable part of the vision-based system Tesla utilizes for self-driving efforts.
However, this part has since been removed and is no longer visible on the EPC.
Now the true question lingers: Why would Tesla add this Camera Washer to the Model Y parts catalog? Is it planning to make it available for owners to utilize on their own cars for personal use, or will it become a prerequisite for Robotaxi operation in customer-owned cars?
While discussing the upgrade options for Hardware 3 vehicles during the Q1 Earnings Call, Tesla CEO Elon Musk had said that the company could establish small, satellite shops that would upgrade cameras and self-driving computers. Perhaps this same strategy could be utilized for vehicles that want to be included in Robotaxi but do not have the correct hardware.
AI4 is currently represented as capable of unsupervised self-driving, and the same was said about HW3 at one point, only for Tesla to admit last quarter that it would, unfortunately, not be possible. Perhaps AI4 vehicles might need this camera washer as a prerequisite, just as HW3 cars will need that camera and computer upgrade.
This could be the first hint of that’s where we are headed.
Tesla has started rolling out a broader change to the ride experience for its Robotaxi fleet by silencing turn signals, but the change is certainly polarizing.
Tesla has generally made it clear that its purpose-built ride-hailing platform, Robotaxi, will cater to the rider in nearly every way possible. This includes having climate preferences, music, and other personal settings loaded up in the car as the rider enters.
But Tesla is taking it a step further by muting turn signal chimes altogether, a change that appears to be a way to make the ride more peaceful:
Tesla has finally turned off the blinker/turn signal noises in their Model Y Robotaxis.
This is a small update, but will definitely be noticeable for riders. It didn’t really make much sense to leave the turn signal sound on when it’s Unsupervised. pic.twitter.com/ITwx60PAMO
— Sawyer Merritt (@SawyerMerritt) July 27, 2026
However, there are a handful of people who are not thrilled about this change. Turn signals are a conditioned part of the human mind for those who ride in a car regularly.
Taking a turn without one feels strange and odd, and not hearing it click while activated could set off some alarms for riders, who might use the noise as confirmation that other drivers know of their intention to turn.
I kind of like it being on, threw me off when riding with Zoox who has had it disabled
— Dan Burkland (@DBurkland) July 27, 2026
Turn signal noises are still audible in customer cars, so if you use FSD in your personal vehicle, you will still hear the turn signal.
The move is certainly one that is unique, but not one that separates it from other ride-sharing services. In a normal car, the clicking sound confirms to the driver that the blinker is active. In a fully driverless Robotaxi, that feedback serves no purpose for passengers, other than peace of mind.
Tesla Summer Update begins rolling out: a look at the new features
Tesla briefly offered this Robotaxi part for your personal car
