Connect with us

Elon Musk

Elon Musk’s TERAFAB project: Everything you need to know

The CEO has hinted heavily for several quarters that it would probably need to produce its own computing power to stay up to speed on the demand it is facing for its projects. It is now taking matters into its own hands.

Published

on

Credit: SpaceX

On Sunday, Elon Musk formally made TERAFAB official—a groundbreaking $20-25 billion joint venture uniting Tesla, SpaceX, and xAI, three of the world’s richest man’s most significant and powerful ventures.

Musk described the project as “the most epic chip building exercise in history by far.”

Elon Musk launches TERAFAB: The $25B Tesla-SpaceXAI chip factory that will rewire the AI industry

The initiative aims to produce over one terawatt of AI compute annually, dwarfing the global industry’s current output of roughly 20 gigawatts per year. Musk framed the effort as “the next step towards becoming a galactic civilization,” positioning it as essential for scaling humanity into a multi-planetary species.

The Need for TERAFAB

Existing chip suppliers such as TSMC, Samsung, and Micron cannot expand quickly enough to meet the explosive demand for AI hardware.

Musk explained the situation clearly:

“We’re very grateful to our existing supply chain… but there’s a maximum rate at which they’re comfortable expanding. We either build the Terafab or we don’t have the chips, and we need the chips, so we build the Terafab.”

The CEO has hinted heavily for several quarters that it would probably need to produce its own computing power to stay up to speed on the demand it is facing for its projects. It is now taking matters into its own hands.

Chip Types and Production Goals

The facility will manufacture two specialized chip families, according to the presentation:

Advertisement
-
  • Edge-inference AI5 and AI6 processors optimized for Tesla’s Optimus humanoid robots and Full Self-Driving systems in vehicles and Robotaxis
  • High-power D3 chips hardened for space environments

Musk outlined annual output targets, which are between 100 and 200 gigawatts of terrestrial compute for robotics, supporting Musk’s vision of producing 1-10 billion Optimus units per year, and the majority (80%) of chips dedicated to orbital AI data centers. Overall, TERAFAB aims to produce 100-200 billion custom AI and memory chips each year.

Scale and Strategy

The size of the TERAFAB project will be remarkable, as Musk indicated after the presentation that the entire Gigafactory Texas campus would not be large enough to fit the needs of the project. In fact, Musk said it would be around 100 million square feet in size, the equivalent of 15 Pentagons or three Central Parks.

Yes, the one in New York City.

Construction will begin with an “advanced technology fab” on the Giga Texas campus in Austin, enabling rapid iteration: design a chip, fabricate lithography masks, produce and test wafers, all within days.

However, the full-scale TERAFAB requires thousands of acres and over 10 gigawatts of power, far exceeding what Giga Texas can accommodate. Musk stated:

“We couldn’t possibly fit the Terafab on the GigaTexas campus. It will be far bigger than everything else combined there.”

Multiple large sites are currently under consideration, but this will need a sprawling land mass to get started.

Advertisement
-

Key Applications

TERAFAB will be a crucial part of the development of some of Tesla’s most valuable projects, including Optimus and data center development, especially from an orbital standpoint. For that reason, we will break this down into Terrestrial and Orbital applications:

Advertisement
-
  • Terrestrial: Powers autonomous vehicle fleets and billions of Optimus robots performing physical labor
  • Orbital: Starship will launch massive AI satellite constellations, starting with 100-kilowatt “Mini” units, and scaling to larger Megawatt models, creating the world’s largest data center in low-Earth orbit.

Space-based advantages include five times greater solar irradiance, efficient vacuum heat rejection, and freedom from terrestrial grid constraints (U.S. electricity generation totals just 0.5 terawatts). Musk emphasized the principle:

“Quantity has a quality all its own.”

We wrote about SpaceX’s recent filing with the FCC for 1 million orbital data center plans.

Strategic Vision

TERAFAB represents vertical integration at an unprecedented scale, combining AI hardware, robotics, and orbital infrastructure.

Musk described the project as “the final missing piece of the puzzle.” With production ramping toward 2027, TERAFAB is set to accelerate an era of abundance, transforming science fiction into reality and positioning Musk’s companies at the forefront of galactic-scale innovation.

Joey has been a journalist covering electric mobility at TESLARATI since August 2019. In his spare time, Joey is playing golf, watching MMA, or cheering on any of his favorite sports teams, including the Baltimore Ravens and Orioles, Miami Heat, Washington Capitals, and Penn State Nittany Lions. You can get in touch with joey at joey@teslarati.com. He is also on X @KlenderJoey. If you're looking for great Tesla accessories, check out shop.teslarati.com

Advertisement
Comments

Elon Musk

SpaceX would not exist if this crucial early launch failed, Musk says

Published

on

Credit: SpaceX

Elon Musk recently restated a fact that still defines SpaceX’s origin story: if Falcon 1’s fourth launch had failed, the company would not exist. The comment answered a reminder that after three consecutive losses, SpaceX had money for only one more attempt.

On X, Peter Diamandis said that the present-day acknowledgement of SpaceX’s success does not discount the rough start the company had. “Almost nobody remembers that Elon’s first rocket failed three times, and there was money for exactly only one more attempt.”

Musk said, “If the 4th launch had failed, SpaceX would not exist.”

In late 2008, the firm was nearly out of cash. Another failure would have ended payroll, closed the Hawthorne factory, and left the Falcon 9 and Dragon programs as unfinished drawings.

Advertisement
-

The first flight lifted off from Omelek Island on 24 March 2006. Thirty-three seconds later, a corroded aluminum fitting on a fuel line leaked. Kerosene ignited around the Merlin engine, control was lost, and the vehicle came apart. The small DARPA payload, FalconSAT-2, survived the short flight only to land on a storage shed near the pad. Investigators later traced the fitting to a materials mix-up that should never have reached the rocket.

Flight 2, on 21 March 2007, looked far better at first. The first stage burned cleanly and handed off to the Kestrel-powered upper stage. The vehicle crossed 100 kilometers and reached a peak of about 289 kilometers. Then propellant slosh in the second-stage tank started a circular coning motion that grew until the engine shut down. Telemetry faded as the stage tumbled, and SpaceX had reached space but not orbit. Over the next year, the team redesigned everything from the ground up, including tanks, baffles, and the new regeneratively cooled Merlin 1C.

That engine flew on Flight 3 on 2 August 2008. The first stage performed almost perfectly and reached 217 kilometers. After main-engine cutoff, leftover fuel in the cooling channels produced a faint residual thrust, roughly 10 pounds per square inch of chamber pressure. On a Texas test stand, the effect was invisible beneath ambient air pressure. In vacuum it was enough to push the spent first stage back into the second stage after separation. The stages collided, the upper stage spun, and the mission was lost. Musk later said a slightly longer delay before staging would have saved the flight.

Six weeks later, the team assembled Flight 4 from remaining parts and flew it on 28 September 2008 at 23:15 UTC. The payload was Ratsat, a 165-kilogram aluminum mass simulator built in-house. Staging was delayed so residual thrust could decay. The Kestrel ignited, the fairing split away, and nine and a half minutes after liftoff the vehicle was in orbit. After a coast, the second stage restarted, settling into a 621-by-643-kilometer path at 9.35 degrees inclination. Falcon 1 became the first privately developed liquid-fueled rocket to reach Earth orbit. Musk called the insertion “middle of the bull’s-eye.”

SpaceX restores a Falcon 1 rocket for 10th anniversary of first launch success

That success unlocked NASA’s Commercial Resupply Services award later that year. Without it, there would have been no Falcon 9, no reusable first stages, and no Dragon cargo or crew flights to the International Space Station. Launch prices would have remained far higher. Starlink’s constellation would not exist; broadband from low Earth orbit would still be a paper concept.

Advertisement
-

Ride-share markets, high launch cadence, and the current pace of lunar and Mars hardware would be years behind. Communications, Earth observation, and the cost of putting anything into space would look more like the 2000s than the 2020s.

One extra second of residual thrust in August 2008 would have written a different decade.

Continue Reading

Elon Musk

Elon Musk’s Grok can basically control anything in your Tesla now

Published

on

Credit: Tesla

Tesla’s 2026 Summer Update turns Grok from a talking companion into a true in-car controller, with considerably expanded capabilities. Where the assistant once answered questions and handled navigation, it can now operate hardware and software through ordinary speech, including several requests at the same time.

Grok has become incredibly robust over the past few quarters, and this new ability that Tesla has included with its Summer Update is perhaps the clearest sign of just how capable it has become.

You can issue many commands to Grok at once, and each will be taken care of: anything from headlight control to climate adjustments to mirror folding can now all be taken care of with a simple sentence spoken toward Grok:

Here’s another example I used in my Model Y:

Tesla’s official Release Notes list the core powers of Grok’s new capabilities: Grok can place phone calls from a paired phone, search a streaming service and queue music, adjust climate, and search the Controls panel. Drivers can also ask it questions about the vehicle or the latest features included in a recent software update.

It can also take care of driving settings, dynamics, and other relevant preferences that deal with how the car operates and handles.

Advertisement
-

Tesla Summer Update begins rolling out: a look at the new features

It’s also more of a use case than a novelty feature. Grok was great for learning about something that was being pondered while Full Self-Driving was taking care of the major automotive responsibilities, but it did have some useful functionality when it came to navigation.

Another less-noted improvement is the swift transition that Grok has from thinking of its answer to giving you one. In the past, it would take a few seconds for Grok to truly come up with a valuable response. It now seems that it is improving, at least slightly.

Continue Reading

Elon Musk

Tesla is fixing Full Self-Driving’s pothole problem

Published

on

Tesla Model Y L in a field
Credit: Tesla

Tesla Full Self-Driving is set to get a major fix with pothole avoidance, a feature that CEO Elon Musk said recently was “coming soon.” The feature has been included within the FSD v14 release notes for some time as an upcoming improvement.

Potholes come in all shapes and sizes, but one thing is universal about them, and that is the fact that every driver wants to avoid them. Driving into or over a pothole can cause tire and wheel damage, alignment issues, and even, in some more severe instances, injury to occupants or major damage to a vehicle in despair.

Tesla Cybercab uses a unique strategy for picking up the right rider

Musk said late last night in a post that pothole avoidance while utilizing the Full Self-Driving suite is “coming soon.”

Advertisement
-

Full Self-Driving, even in its most recent and robust forms, still has its shortcomings. While the suite has performed exceptionally well with avoiding on-road obstacles like cardboard boxes, horse droppings, car parts, and other debris, it still seems to struggle with recognizing certain things.

Potholes and other abrupt changes in a road’s layout are things that FSD still tends to struggle with. Perhaps the suite’s 3D modeling is still in need of some additional data or some sort of script that will help it to avoid a potentially destructive pothole or bump in the road that would be easily recognizable by the human eye.

Musk has mentioned pothole avoidance for some time, with the initial idea coming in April 2019 when an owner first requested the feature. Musk said that Tesla would “definitely” develop pothole avoidance.

In August 2020, Musk said Tesla was in the process of labeling bumps and potholes so cars can either slow down or steer around them altogether.

Tesla to utilize micro maps for pothole-detection in future update

Avoiding major disturbances in the road is a necessary feature for Full Self-Driving to have, especially as Tesla is working toward a fully autonomous program that will eventually allow every occupant in the vehicle to sleep, work, or enjoy leisure time while traveling.

Advertisement
-

That truly begins this week with the launch of Cybercab on Thursday.

Continue Reading