Connect with us

News

SpaceX Dragon capsule breaks U.S. spaceflight records

Dragon docked to the International Space Station (Credit NASA Johnson)

Published

on

SpaceX has now launched a flight-proven Dragon capsule to the International Space Station (ISS) 20 times.

Following the successful launch and docking of the CRS-28 mission. SpaceX broke a couple of U.S. Spaceflight records.

CRS-28 marked the 38th time a Dragon spacecraft visited the orbiting outpost, beating the record held by the Space Shuttle. SpaceX is currently the only U.S.-based company making regular visits to the ISS, with resupply missions and crewed missions for NASA. Later this year, they will also be launching 3 Cygnus resupply vehicles owned by Northrup Grumman, which is retiring its rocket, the Antares 230+.

After the first full day in space, Dragon 2 also broke the U.S. record for total time in space at 1,324 days in orbit. The Dragon capsule that is flying the CRS-28 mission is C208 and is on its 4th flight to the ISS.

Dragon C208 docked with the ISS on Tuesday, June 6th at 5:54 AM ET, delivering over 7000 lbs of supplies and experiments. Also on board, located in the trunk of the spacecraft, is a pair of IROSAs (International Space Station Roll Out Solar Arrays) that will provide increased power to the space station.

Launching this mission was Falcon 9 B1077, which has launched 5 times now, including previously sending the Crew-5 mission to the ISS. After stage separation, the first stage successfully landed on the droneship ‘A Shortfall of Gravitas,’ and while the first stage was landing, the 2nd stage continued its burn to insert the Dragon capsule into the necessary orbit so it could catch up to the ISS. The 2nd stage featured a shorted engine bell as the full MVAC engine bell was not needed, and SpaceX has been able to save on material costs when the extra performance is not required.

Advertisement
-

With the International Space Station expected to be used well into the future, SpaceX will continue delivering supplies and ferrying astronauts to and from the orbiting outpost for many years to come, most likely surpassing quite a few more spaceflight records.

Questions or comments? Shoot me an email @ rangle1555@gmail.com, or Tweet me @RDAnglePhoto.

Launch journalist, specializing in launch photography. Based on the Space Coast, a short drive from Cape Canaveral and the SpaceX launch pads.

Advertisement
Comments

News

Tesla Semi is officially headed to Europe

Published

on

Credit: Tesla

Tesla has officially confirmed plans to bring its all-electric Semi truck to Europe, with full specifications and market-launch details set for unveiling at the IAA Transportation trade fair in Hannover, Germany.

The event runs September 15–20, with a possible press preview on September 14. The announcement, shared via Tesla’s Semi account, marks a significant expansion beyond North America nearly nine years after the truck’s original 2017 reveal.

In the United States, the Semi’s path has been gradual. Limited pilot production and customer deliveries began in late 2022, primarily to fleets such as PepsiCo. After years of refinement, high-volume manufacturing started on April 29, 2026, at a dedicated facility adjacent to Gigafactory Nevada.

The plant targets an annual capacity of 50,000 units, though the ramp is expected to be gradual, with “many thousands” of trucks projected by the end of 2026.

Demand is building, with recent orders including 500 units for Einride (deliveries starting September 2026, serving Amazon and others) and hundreds more from operators such as WattEV. Pricing stands at approximately $260,000 for the Standard Range and $290,000 for the Long Range before incentives.

Tesla Semi pricing revealed after company uncovers trim levels

Earlier in 2026, Tesla finalized production specifications that incorporated substantial updates. In February, the company detailed two variants designed for a full 82,000-pound gross combination weight.

Advertisement
-

The Standard Range offers about 325 miles of range with a 548 kWh battery and curb weight under 20,000 pounds. The Long Range delivers roughly 500 miles with an 822 kWh pack and a 23,000-pound curb weight. Both use three independent rear-axle motors producing up to 800 kW (about 1,073 horsepower), achieve energy consumption of around 1.7 kWh per mile, and support megawatt-class charging at up to 1.2 MW—recovering about 60 percent of range in 30 minutes through the MCS standard.

Additional refinements include a roughly 1,000-pound weight reduction versus earlier prototypes, improved aerodynamics, a 48-volt electrical architecture, electric power take-off up to 25 kW for refrigerated trailers, and fleet management software with over-the-air updates.

These advances position the Semi as a competitive option against diesel trucks on operating costs and performance. For Europe, adaptations such as lighting, cab configurations (including potential sleeper options), and regulatory compliance are anticipated.

With series production underway in Nevada and major fleet commitments secured, the upcoming IAA reveal will clarify timelines, European-specific specs, and pricing, potentially accelerating electrification of heavy-duty freight on both continents.

Continue Reading

Investor's Corner

Tesla Robotaxi gets a massive upgrade in Nevada

Nevada regulators just approved a massive expansion of Tesla’s robotaxi fleet across the entire county.

Published

on

By

Concept art of a Tesla Cybercab in Las Vegas Strip as rendered via Grok

Tesla’s robotaxi footprint in Nevada just grew by roughly 500 times in a single regulatory vote.

The Nevada Transportation Authority approved Tesla’s full Autonomous Vehicle Network Company permit on Thursday, clearing the way for the company to deploy up to 5,000 driverless vehicles across Clark County over the next 12 months. The decision came during a four hour general session meeting that Tesla investor Sawyer Merritt watched live and reported on X, noting the vote replaces the interim order that had limited Tesla to just 10 robotaxis on a narrow stretch of the Las Vegas Strip.

That earlier cap, covered here after it surfaced on August 13, came with restrictions that looked stricter than what Tesla runs in Austin: a 45 mph speed ceiling, no airport pickups, and a geofence confined to the Strip corridor. The new approval extends Tesla’s operating authority to all of Clark County, with room to request an even wider geofence across the state.

Tesla representatives at the meeting said they have no intention of putting 5,000 cars on the road right away. Commercial rides are expected to start within 30 days, pending vehicle inspections, insurance filings, and fare approval, the standard steps every robotaxi operator in Nevada has had to clear.

Tesla’s own Robotaxi account replied to the news with a short line, The golden future is upon us.

The timing lines up with Tesla’s broader robotaxi push this month. The company is preparing to open Cybercab rides to the public in Austin as soon as this month, and it opened a sweepstakes for riders to win a seat at the launch event. Tesla filed its original application for a 5,000 vehicle Nevada fleet back in June, a request regulators trimmed to 10 vehicles when they issued the interim order in July. Thursday’s vote effectively grants the number Tesla asked for from the start.

Zoox, the Amazon owned robotaxi operator, has run in Nevada since 2025 and was capped at 100 vehicles before Thursday’s decision. Tesla’s new ceiling puts it well ahead of that comparison on paper, though the company has said its actual fleet size will depend on how quickly FSD v15 rolls out, the software update executives have called the gateway to scaling unsupervised robotaxi operations nationwide.

Advertisement
-
Continue Reading

News

Tesla admits to slow Model Y Robotaxi integration, but for a good reason

Published

on

Credit: Tesla

Tesla welcomed JPMorgan analysts to one of its factories earlier this month, with the Wall Street firm highlighting its findings in a new note to investors. One of the more pertinent pieces of information is that Tesla admitted to slowly integrating Model Y vehicles into its Robotaxi fleet, but it has a good reason.

JPMorgan analysts recently toured Tesla’s Fremont Factory and met with the company’s investor relations team, emerging with a clearer picture of the automaker’s Robotaxi strategy. According to the bank’s note, Tesla is intentionally limiting the addition of Model Y vehicles to its existing Robotaxi fleet.

The firm’s analysts said:

“Tesla indicated it is intentionally holding back on adding Model Y units to the robotaxi fleet, expressing confidence in its ability to scale Cybercab in the near-term. On FSD V15, Tesla views this release as a step-change in performance, comparable to the leap from V13 to V14. The V15 upgrade encompasses seven core technologies, with ~40% of those currently being tested in the robotaxi fleet, where initial feedback has been encouraging.”

Far from signaling delays or doubts about autonomy, the move reflects strong management confidence in the near-term scalability of the purpose-built Cybercab.

Tesla has operated its Robotaxi service primarily with modified Model Ys since launching in Austin and expanding to other markets. Yet the company is now deliberately holding back further Model Y conversions. The rationale is straightforward: leadership believes the Cybercab, a two-seat, steering-wheel- and pedal-free vehicle optimized for high utilization, can ramp production and deployment more efficiently in the coming months.

This dedicated form factor promises better unit economics for the majority of rides, which typically involve one or two passengers, while freeing consumer Model Y inventory for retail sales.

Advertisement
-

Supporting this pivot is Full Self-Driving (FSD) software version 15, which Tesla describes as a genuine step-change in performance, comparable to the leap from V13 to V14. The update incorporates seven core technologies; roughly 40 percent are already undergoing real-world testing in the current Robotaxi fleet, with early feedback described as encouraging.

Tesla is carefully managing software development to minimize regressions in core driving functions as new capabilities are added. Management positions V15 as the primary gateway to scaling unsupervised FSD. Importantly, the existing AI and Hardware 4 stack is already capable of running V15 and supporting unsupervised operation.

Cybercab itself is only the first vehicle on the platform. Tesla reiterated that additional form factors will follow, pointing to concepts such as the earlier “Robovan” demonstration as examples of how the architecture can evolve.

Tesla’s mysterious Robovan makes a sneak peek with Optimus in Terafab video

Parallel progress continues on the Optimus humanoid robot, which remains on track for start of production in the coming months, with commercial sales possible as early as the second half of 2027. Generation 3 details will be revealed closer to production to preserve competitive advantages, while Generation 4 scope will draw on real-world Gen 3 experience.

JPMorgan left the meeting with a deeper appreciation for Tesla’s manufacturing automation and maintained its $475 price target. The decision to slow Model Y Robotaxi integration is therefore not a setback but a calculated prioritization of a more efficient, purpose-built solution that management believes is ready to scale.

Continue Reading