Connect with us

News

Elon Musk’s talk at Tesla Giga Texas Cyber Rodeo: updates and details

(Credit: Tesla)

Published

on

As everyone at Tesla’s Cyber Rodeo settles down to listen to Elon Musk’s talk at Giga Texas, the anticipation builds in the air. The Tesla community is eager and excited to hear about any updates and details Elon Musk will announce to the world at Giga Texas Cyber Rodeo.

Welcoming Elon Musk to the stage are drones depicting an image of Nikola Tesla, the inventor the company is named after. The drones also depicted the Cyber Rodeo sign. Later, the drone show formed the image of a moving vehicle, which turned out to be the Model Y. Next the drones formed the Cybertruck’s outline in the sky, an image few at the Cyber Rodeo will forget.

And, of course, in true Elon fashion, Tesla did not forget to highlight the community’s love for The Doge with drones. The Tesla hedgehog also made an appearance during the spectacular drone show.

After the drone show, Tesla showed a short clip of a “herd” Tesla Model Y’s running through Giga Texas grounds alongside a horse and its rider.

The video was cut short with the arrival of Elon Musk, arriving in style in an original Tesla Roadster — the car that started it all.

The following are Elon Musk’s comments from his Giga Texas Cyber Rodeo address.

“We’re gonna talk about the past, present and future,” Elon Musk told the crowd, showcasing the first car Tesla ever made: the Roadster.

“When we first started out Tesla, I thought we had — optimistically — a 10% chance of succeeding,” he stated. He thanked the Tesla team for their hard work and contributed the company’s current success to them.

Advertisement
-

Musk lists all the products Tesla offers, including its solar products. He announced that two-thirds of America’s electric vehicles are Tesla cars.

Musk highlighted the accomplishments of the Tesla AI team. He announced that Tesla was aiming for the wide release of FSD beta in North America this year.

“California was running out of room,” Musk stated. “And we needed a place to grow big. And there’s no place like Texas,” he said, thanking the state and particularly Travis County.

Musk revealed that Tesla Giga Texas is taller than the Burj Khalifa if the factory were turned on its side. In classic Elon Musk, the CEO said that one could fit a total of 194 billion hamsters in Giga Texas.

“And this building is the most advanced car factory that Earth’s ever seen,” proclaimed Elon Musk, bringing up the idea that Tesla’s factories are product in and of themselves once again.

Musk noted that Tesla is building its own cells at Giga Texas, the long-awaited 4680 cells. He proudly stated that the Austin factory could be one of the biggest cell factories in the world.

“Raw materials in, a bunch of stuff happens, and car out,” Musk said, describing the simplified version of Tesla’s main operations. He added that Tesla plans to produce the Cybertruck in Austin next year.

“I can’t wait to have this baby around. [Cybertruck] is gonna be epic,” Musk commented about the electric pickup truck.

Musk also stated that Giga Texas will be the most “high-volume” factory in America. He stated that Tesla will aim to command 20% of the auto market in the long term.

Advertisement
-

“We’re gonna move at a truly massive scale,” Elon Musk teased. He also hinted at the company’s Robotaxi fleet, describing it as futuristic and significantly different than Tesla’s other offerings. Musk also talked about Optimus.

Tesla plans to produce V1 Optimus, the Cybertruck, the next-generation Roadster, and the Semi next year.

Tesla Chief Designer Franz von Holzhausen later showed up with the Cybertruck. Elon Musk pointed out that there are no handles on the Cybertruck. He apologized for the vehicle’s production delay, though both the CEO and the Design Chief assured the audience that the Cybertruck will be well worth the wait.

And with that, Elon Musk kicked off the Cyber Rodeo party! Several minutes’ worth of fireworks ensued.

(Credit: Tesla)

The Teslarati team would appreciate hearing from you. If you have any tips, reach out to me at maria@teslarati.com or via Twitter @Writer_01001101.

Maria--aka "M"-- is an experienced writer and book editor. She's written about several topics including health, tech, and politics. As a book editor, she's worked with authors who write Sci-Fi, Romance, and Dark Fantasy. M loves hearing from TESLARATI readers. If you have any tips or article ideas, contact her at maria@teslarati.com or via X, @Writer_01001101.

Advertisement
Comments

News

Tesla exec hints at a wild fix for Robotaxi’s biggest weather problem

Tesla VP Lars Moravy says focused lasers could keep robotaxi cameras clear instead of wipers.

Published

on

By

Tesla Cybercab in a rainy Austin, Texas rendering

Tesla may one day use lasers instead of wiper blades to keep its robotaxi cameras clear. Lars Moravy, Tesla’s Vice President of Vehicle Engineering, floated the idea in a new episode of Jay Leno’s Garage released Monday, where he and design chief Franz von Holzhausen walked Leno through the Model Y L.

“If you fire them in a focused area, you can clean the sheet of water and create a barrier,” Moravy said. “When you think about autonomy, it might be a good solution to only clean the area where the camera is.” He added that clearing an entire windshield would take too many lasers to be practical.

The comment brings back one of Tesla’s stranger patents. The company filed for “Pulsed Laser Cleaning of Debris Accumulated on Glass Articles in Vehicles and Photovoltaic Assemblies” in May 2019, and the U.S. Patent Office granted it in September 2021. An updated divisional version was granted on March 31, 2026. The system detects debris on the glass, identifies what it is, and pulses the laser at a calibrated rate so the beam never penetrates deeper than the glass itself. The filing names windshields, side windows, camera lenses and solar panels as possible targets.

Lasers were once rumored for the Cybertruck, which appeared at its November 2019 unveiling with no wipers at all. Tesla eventually settled on a single oversized blade, and Elon Musk admitted the wiper was the part of the truck that troubled him the most. That production line is now scheduled to shut down around mid 2027 to make room for more Cybercab output.

Advertisement
-

What has changed since then is who is in the vehicle. A privately owned car has a driver who can notice a smeared windshield and do something about it. A Cybercab heading to its next pickup has nobody on board to check. Tesla has been chipping away at that problem with conventional hardware. Model Y Robotaxis in Austin were spotted with washers on their side repeater cameras in January, and a lens cleaning patent granted in May describes a fluid and wiper assembly for vehicle cameras and Optimus’ eyes. A laser would remove the fluid and the blades, both of which need regular replacement across a fleet.

The same episode gave Leno his first ride on Full Self-Driving (Supervised). The Model Y L pulled over on its own when an ambulance approached with its sirens on. “We got it on self-driving mode! I’m not touching anything,” Leno said. Moravy and von Holzhausen also explained that owners remain responsible while using FSD (Supervised), while Tesla takes responsibility for Robotaxi rides because it acts as the operator. Tesla launched the Model Y L in the U.S. in July at $61,990.

Moravy gave no timeline, and he described the laser setup as something Tesla is considering rather than a confirmed feature. The fleet it would serve keeps getting bigger, though. Tesla launched unsupervised Robotaxi service in San Antonio on Monday, its eighth city, and expanded its Austin service area to roughly 443 square miles on the same day. Several of those markets, including Houston, Miami and Tampa, see heavy seasonal rain.

Continue Reading

News

Tesla Robotaxi enters its newest city, reaching San Antonio

Published

on

Credit: @AdanGuajardo/X

Tesla launched unsupervised Robotaxi service in San Antonio, Texas, on November 9, 2026, with the first rides beginning at 5 a.m. local time.

The company’s official Robotaxi account on X posted the announcement just after midnight, sharing a map that outlines a large operational zone covering much of the city. The geofence is roughly 274 to 275 square miles, making it Tesla’s largest day-one Robotaxi service area to date.

The zone centers on downtown, covers nearly everything inside Loop 410, and extends north to Loop 1604 between Interstate 10 and U.S. 281, with further reach west past State Highway 151, east beyond I-35, and south toward I-37. This area encompasses about one million residents and hundreds of thousands of jobs.

San Antonio International Airport lies inside the geofence, though Tesla is not currently offering airport pickups or drop-offs. This hopefully will happen soon, as ride-sharing to and from the airport can be expensive.

The launch makes San Antonio Tesla’s eighth unsupervised Robotaxi city and its fifth in Texas, joining Austin, Houston, Dallas, and Fort Worth. Florida markets in Miami, Orlando, and Tampa are also live.

Service uses modified Model Y vehicles operating without a safety driver in the vehicle, consistent with recent unsupervised expansions. Cybercab two-seaters remain limited primarily to Austin for now. It’s worth noting that Dept. of Transportation officials in Texas have already ok’d the Cybercab’s operation in Austin, and one official called it “a tangible example of how quickly our transportation system is evolving.”

San Antonio was previously listed among near-term targets in Tesla’s October 2026 Robotaxi safety materials, alongside Las Vegas, Phoenix, and Jacksonville. The rapid Texas rollout follows Fort Worth’s unsupervised debut on November 2 and builds on Austin’s original launch in June 2025.

The 274-square-mile debut remains substantially larger than Waymo’s local footprint and marks continued progress in Tesla’s unsupervised autonomy efforts after starting the year with no such rides. The company has stated ambitions for broader 24/7 operations by the end of 2026 as vehicle counts and software reliability improve.

Continue Reading

Energy

Tesla begins groundworks on $10B ‘Project Crystal Sun’ in Texas

Published

on

Elon Musk stands in profile against a clear blue sky, with a bright overhead sun shining above a vast landscape of Tesla solar panels stretching to the horizon, and a smaller Texas flag flying on a pole to his right.

Tesla has started to perform earthworks engineering on the roughly 3,000-acre site in Fort Bend County, Texas, advancing the massive $10 billion Project Crystal Sun plan to build a vertically integrated solar manufacturing complex.

Flyover drone footage from S.E. Robinson, Jr. released this morning shows the location under development. Tesla has crews on site performing large clearings, but you can also see equipment staging areas, the use of an existing homestead, and active leveling across a substantial portion of the property.

Public filings first submitted in July under Texas’s Jobs, Energy, Technology and Innovation Act describe a plant that would manufacture the full solar chain: everything from silicon ingots, wafers, coated cells, and finished modules.

Tesla projects 9,712 permanent jobs by 2033, ramping from roughly 1,900 positions in the first year of operations, plus a peak of about 1,147 construction jobs. Construction is targeted for 2026–2028, with commercial production beginning in the first quarter of 2029. An accompanying economic analysis estimates the project could add roughly $107 billion to Texas GDP over several decades.

Local incentives have cleared major hurdles. Lamar Consolidated Independent School District unanimously approved school-tax limitations in September, and Fort Bend County commissioners approved a package of abatements and related agreements in late October that could extend equipment tax breaks for as long as 35 years.

Tesla had previously indicated it was evaluating a competing out-of-state location.

The effort fits broader statements by Musk that Tesla and SpaceX are each working toward 100 gigawatts of annual U.S. solar manufacturing capacity. If built as described, Project Crystal Sun would stand as one of the largest domestic attempts to create a fully integrated solar supply chain on American soil.

While Tesla has not issued a formal groundbreaking announcement, the visible site preparation and high-profile social media activity represent a concrete step forward for a project that has moved from confidential filings to active earthworks in a matter of months.

Continue Reading