News
SpaceX’s Florida Starship shown off in aerial footage as Texas prototype grows rapidly
Local amateur photographer and spaceflight fan Michael Tapes has graciously shared a new aerial view of SpaceX’s Florida Starship facility, where dozens of workers can be seen buzzing around what is hoped to become the first orbital-class prototype of the massive spaceship and upper stage.
Tapes’ aerial footage offers a unique look at the layout of SpaceX’s Florida site as of July 9th, illustrating just how active and expansive it is. Some workers can be seen building something (perhaps preparing a new worksite) under a large, white tent, while another group surveys two large Starship segments and a third works to prepare new stainless steel ring sections. Of note, those two large Starship segments appear to be bereft of any obvious activity, perhaps a consequence of a fire that caused about $100,000 in damage the day prior (July 8th).
In fact, the shipping container that took what looks like the entirety of fire-related damage is visible on the west side of the SpaceX facility’s main hangar. Workers could be seen heading inside the extremely scorched container, likely removing debris, cleaning up the site of the incident, and preparing to scrap the damaged container itself.
Thankfully, nobody was injured by the fire and ~$100K of damage is certainly an inconvenience but is definitely nothing more for a multibillion-dollar company like SpaceX. Given that dozens of vehicles are visible in the parking lot, it’s safe to say that tons of work is ongoing under the roofs of the site’s many covered buildings, potentially designing Starship/Super Heavy, working on the rocket’s first orbital-class thrust structures, building new steel ring segments, and much more. With any luck, work on orbital Starship assembly and integration has already resumed following the small July 8th fire.
Star(ship) Wars
Speaking of that work, prior to the last week or so of progress on SpaceX South Texas’ own orbital Starship prototype, both Florida and Texas appeared to be more or less tied with two large Starship segments each and various other 9m-diameter subsections spread around their respective facilities. Impressively, Boca Chica has been marked by a flurry of recent work as multiple in-process steel rings were stacked on top of the Texas Starship’s propulsion and tankage section.
In just the last two weeks of June, workers thus pushed through the brutal South Texas heat and humidity to stack three new sections of fuselage, literally doubling the height of Boca Chica’s (hopefully) orbital-class Starship prototype in a dozen or so days. The ship’s conical nose section continues to be polished, while some sort of additional work is likely going on inside, away from public view. It’s hard to get a good overhead view but it’s safe to assume that – in the large barrel sections both in Florida and Texas – technicians are working to install (or at least prepare for) stainless steel tank domes, one of the last major finishing touches for spacecraft’s tank sections.
A huge amount of work remains for both sites but the visible progress as new ship segments are stacked and welded together is undeniably cathartic and satisfying. Working 10-12 hour shifts exposed to the Texas and Florida summer sun, heat, and wildlife is in no uncertain terms bound to be a hellish experience, but at least the hard work is so obviously producing results.
The most exciting kind of grass-watching
Back in Florida, several additional Starship barrel sections are in various stages of work, at least two of which appear to be nearly ready for stacking atop the propellant tank section already being assembled. Meanwhile, propellant tank domes were spotted in different stages of fabrication inside the Florida facility’s main hangar-cum-production-line, awaiting their turn to leave the building and prepare for installation on Starship East.
All said and done, once those visible segments are installed, Starship East will (at least by appearances) be neck and neck with its Texas sibling once more. In reality, there is likely no actual race between the two sites and they are reportedly sharing any critical discoveries and lessons-learned. Nevertheless, humans are notoriously competitive and one can only begin to imagine the (hopefully friendly) rivalry forming between the geographically distinct teams.
At the same time, SpaceX’s Florida team has several home-field advantages, so to speak, owing to their proximity to the several hundred SpaceXers working at the company’s Florida launch facilities and recovery fleet. Additionally, Florida’s Starship facility is just a few dozen miles away from SpaceX’s Kennedy Space Center Pad 39A, the most likely site of Starship’s (and Super Heavy’s) first suborbital and orbital launch attempts.
At the end of the day, a little friendly internal competition and – more so – a literal Starship A/B test are bound to be a huge benefit for SpaceX’s next-gen launch vehicle program, significantly increasing the speed at which the company can make mistakes, solve problems, and get Starship ready for orbit.
Check out Teslarati’s Marketplace! We offer Tesla accessories, including for the Tesla Cybertruck and Tesla Model 3.
Investor's Corner
Elon Musk drops a Thanksgiving hint about Starship’s biggest test yet
Elon Musk says Starship Flight 15 will try to catch the ship itself, a first.
Elon Musk says SpaceX’s next Starship flight will try something nobody has done before, by catching the ship itself. Speaking to roughly 2,000 people at the X Takeover event at Giga Texas on Saturday, Musk said Flight 15 is about four to six weeks away and “probably launches a little bit before Thanksgiving, is my guess.”
That is a slip from earlier reporting, which had pointed to a launch as early as October 19. Musk explained why the date keeps moving. “We’re making a bunch of improvements to the rocket between every flight,” he said, adding that there are often hundreds, sometimes thousands, of small changes. This time the list is short, “but some of them take a fair bit of work and we’ve got to go inside the tank to make some of these changes.”
“We’re going to try to catch the ship, which is a super big deal,” Musk said. “If we do so, that’ll be the first time that there’s been full recovery of an orbital class rocket.” SpaceX has already caught the Super Heavy booster with the tower’s mechanical arms, and has talked about catching the ship since late 2025, but the upper stage has never been caught.
Musk also laid out what comes after. “The next big milestone would be to refly both the booster and the ship,” he said, describing a Flight 16 where “all parts of an orbital rocket are reflown.”
The reason SpaceX wants this comes down to cost and cadence. Every Starship ship so far has ended its flight in the ocean, and SpaceX expects most of those water landings to end in fireballs. A ship that returns to Starbase intact can be inspected and flown again. SpaceX’s IPO filing, says Starship V3 is designed to deliver 100 metric tons to orbit in a fully reusable configuration, that SpaceX aims to cut the cost to reach orbit by 99% or more versus the historical average, and that tower catches should allow “multiple launches per day.”
The payoff goes beyond cheaper launches. The next generation Starlink V3 satellites are too large for Falcon 9 and can only fly on Starship, which can carry up to 60 per flight. Flight 14 on September 28 deployed the first 26 of them after Starship reached orbit despite an early engine shutdown, as Teslarati reported. Musk blamed engine computer software, and said the heat shield “was extremely robust,” which he claimed in August had solved Starship’s biggest challenge.
NASA’s Moon plans depend on the same capability. NASA’s inspector general has described a lander mission that needs a propellant depot in low Earth orbit and more than 10 tanker flights, with SpaceX targeting one tanker launch every six days. That schedule only works if ships and boosters come back fast and fly again. Also, ship to ship propellant transfer has not been attempted yet.
One interesting hurdle yet to be explored is bringing the ship back to the launch site, with reentry over land, which will undoubtedly come with a lot of aviation safety reviews.
Lifestyle
Tesla’s mirrorless Cybercab will give riders a visibility upgrade
Tesla engineer confirms Cybercab update letting riders pull up rear and repeater cameras on demand.
Tesla is working on a Cybercab update that would let passengers pull up the vehicle’s rear and side cameras on demand, and the request came straight from a rider.
The exchange played out on X late Friday. Cybercab rider Dan Burkland shared photos of the two-seater’s cabin screen after an evening ride, praised the UI team’s work, and left one request: let riders open the rear and repeater cameras whenever they want, “especially for peace of mind.” Tesla UI software engineer Evan (@CarCoder) answered with two words: “In development.”
The Tesla UI team absolutely crushed it with the infotainment software. Nicely done @CarCoder!
One feature request: Allow folks to pull up the rear & repeater cameras on demand. This would be great especially for peace of mind. https://t.co/mNAOSLx6pE
— Dan Burkland (@DBurkland) October 10, 2026
The idea fits a pattern Teslarati has tracked since public rides began. Days after paid Cybercab service opened in Austin, Tesla sent riders a survey that asked them to rate the touchscreen, the app and the cabin, and to pick the features they wanted most. We reported on that survey in September, and a camera view is the kind of small software change Tesla can push quickly if riders keep asking.
It also speaks to something unique about the vehicle. With no steering wheel, no pedals and no driver, passengers have no mirror to check and no way to see behind them. The hardware is clearly built for camera awareness, from the repeater cameras to the rear camera. Letting a passenger look through those same cameras would give a nervous first time rider a way to confirm what is around the car.
The timing matters because the fleet is growing fast. Tesla’s Robotaxi account said on Saturday that more than 300 Cybercabs are now serving Austin, an eightfold increase in 30 days, and Tesla AI chief Ashok Elluswamy named Dallas as the next city. More cars and more cities mean more people riding in a driverless vehicle for the first time, which is exactly when small trust features carry weight.
For now, the feature is confirmed only as in development. If Tesla follows its usual pattern with Cybercab software, riders could see it appear in a point release without any announcement, and Teslarati will watch for it.
News
Tesla’s Cybercab fleet jumped 8x in a month, with Dallas up next
Tesla confirms its first official Cybercab fleet number as Austin scales fast and Dallas looms.
Tesla says more than 300 Cybercabs are now serving Austin, the first time the company has put an official number on its active Cybercab fleet. The figure came from the Robotaxi account on X on Saturday, which wrote that one month after launch the service had “scaled to 300+ Cybercabs serving Austin – an 8x increase in 30 days.”
Ashok Elluswamy, Tesla’s head of AI software, quoted the post with a line that carried the bigger news. “Two years since the 10/10 Cybercab WeRobot event, the cabs are everywhere in Austin now. Dallas soon,” he wrote. It is the first time Tesla has named the next city for public Cybercab rides.
One month after launch, we’ve scaled to 300+ Cybercabs serving Austin – an 8x increase in 30 days https://t.co/EagJy2JAsm
— Robotaxi (@robotaxi) October 10, 2026
Tesla opened Cybercab rides to the public in Austin on September 4, as Teslarati reported, a day after an invite only launch event. The ramp since then has been steep. Our September 28 report had the fleet at well over 100 units after availability jumped from 58 to 125 in a single week. On Thursday, Tesla added 150 Cybercabs to the Texas automated vehicle registry, lifting its registered count to 319 from 169. The first seven appeared on the registry on August 31.
RobotaxiTracker, a community site that counts vehicles from sightings and state records, listed 275 vehicles in unsupervised service in Austin on Saturday, 105 of them Cybercabs, which is well below Tesla’s figure. Tracker counts can lag official numbers, though Sawyer Merritt noted that Cybercab wait times in Austin stayed short on Saturday evening even with more than 2,000 fans in town for X Takeover.
Regulators are watching the rollout. NHTSA opened an audit query into Tesla’s certification that the Cybercab meets federal safety standards, and sworn answers are due October 30. Tesla reports third quarter earnings on October 21, which gives the company a natural venue to define its fleet numbers and put a date on Dallas.
Elon Musk drops a Thanksgiving hint about Starship’s biggest test yet
Tesla’s mirrorless Cybercab will give riders a visibility upgrade
Tesla’s Cybercab fleet jumped 8x in a month, with Dallas up next
The Pentagon taps Elon Musk to design the battlefield of the future
Tesla Roadster’s new patent preps white-knuckle speeds, keeping it grounded
