News
Tesla Gigafactory 3 buildout continues at rapid pace amid ongoing hiring ramp
To say that Tesla’s Gigafactory 3 in Shanghai is being built at a rapid pace is an understatement. Since the first pillar of the general assembly building was installed in the middle of March, the entire Gigafactory 3 complex has undergone a drastic transformation. The site was but a muddy field in January, but this July, it has become a notable industrial area.
A recent flyover from Tesla enthusiast and drone operator Wuwa Vision (烏瓦) on YouTube has revealed some of the most recent developments in the Gigafactory 3 site. Much of the work in the site is currently being done inside the main factory, but some operations is still ongoing in the facility’s exterior, which is now being refined. Images from the flyover show workers paving the roof with concrete, while finishings in other sections of the facility are being done.
Reports from local media have also mentioned that Tesla is continuing its hiring efforts for Gigafactory 3, which is expected to be operational by the end of this year. Over the course of several job fairs, Tesla has reportedly hired a notable number of workers, including those from other automakers such as Volvo and General Motors. With these efforts, Tesla is building up a workforce that is skilled and experienced in China’s auto industry.
The multiple job fairs that Tesla has been holding for Gigafactory 3 suggest that the electric car maker is expecting the facility to start operations sooner rather than later. Elon Musk has stated that he expects the facility to start manufacturing the Model 3 sometime before the end of the year, though local reports from China have pointed to the possibility of production activities beginning as early as September.
Other sections of the Gigafactory 3 complex are also being built at an incredibly fast pace. A substation, which is expected to be completed by September, is currently being built southwest of Gigafactory 3’s general assembly building. Structures that appear to be dormitories for employees and assembly areas for events have also been set up on the site.
For his part, Ma Chunlei, Deputy Secretary-General of Shanghai Municipal People’s Government and Director of Shanghai Development and Reform Commission, expects Gigafactory 3 to produce 3,000 vehicles per week when it starts hitting volume production, possibly early next year. The Shanghai official’s target timeframe seems quite optimistic considering that Tesla, when it opened pre-orders for the Made-in-China Model 3 at the end of May, quoted an estimated 6-10 months before the first deliveries of the all-electric sedan will begin.
Watch a recent flyover of Tesla’s Gigafactory 3 complex in the video below.
News
Tesla silences Robotaxi turn signals in sweeping but polarizing change
Tesla has started rolling out a broader change to the ride experience for its Robotaxi fleet by silencing turn signals, but the change is certainly polarizing.
Tesla has generally made it clear that its purpose-built ride-hailing platform, Robotaxi, will cater to the rider in nearly every way possible. This includes having climate preferences, music, and other personal settings loaded up in the car as the rider enters.
But Tesla is taking it a step further by muting turn signal chimes altogether, a change that appears to be a way to make the ride more peaceful:
Tesla has finally turned off the blinker/turn signal noises in their Model Y Robotaxis.
This is a small update, but will definitely be noticeable for riders. It didn’t really make much sense to leave the turn signal sound on when it’s Unsupervised. pic.twitter.com/ITwx60PAMO
— Sawyer Merritt (@SawyerMerritt) July 27, 2026
However, there are a handful of people who are not thrilled about this change. Turn signals are a conditioned part of the human mind for those who ride in a car regularly.
Taking a turn without one feels strange and odd, and not hearing it click while activated could set off some alarms for riders, who might use the noise as confirmation that other drivers know of their intention to turn.
I kind of like it being on, threw me off when riding with Zoox who has had it disabled
— Dan Burkland (@DBurkland) July 27, 2026
Turn signal noises are still audible in customer cars, so if you use FSD in your personal vehicle, you will still hear the turn signal.
The move is certainly one that is unique, but not one that separates it from other ride-sharing services. In a normal car, the clicking sound confirms to the driver that the blinker is active. In a fully driverless Robotaxi, that feedback serves no purpose for passengers, other than peace of mind.
News
Tesla Full Self-Driving v14.3.6 review: a rare regression, but some bright spots
Tesla released Full Self-Driving version 14.3.6 last week, and after what was potentially one of the best FSD releases in v14.3.5, there has been a bit of a regression. While there are some bright spots, the changes made to v14.3.6 seem to have backtracked some behaviors.
Overall, it is hard to really complain about FSD in any sense; it has revolutionized how I travel literally anywhere. According to my self-driving app, the last time I went a day without using it was 59 days ago.
However, I think it’s also important to recognize when things are just plain bad with FSD. There are times it does truly mind-boggling things, and I’ll dive into those here. Additionally, I only had these issues on local roads, not on highways. Highway operation, generally, is always incredible other than the occasional complaint about speed or left lane camping.
With those things being said, my personal experience may not represent others’ experiences. A handful of people have said they have had a similar experience on v14.3.6, while others have said it is more than normal.
Turning Hesitancy, Inaccuracy
I’ve noticed more inaccuracy turning into multi-lane stretches of road than in any version I can remember. I’ve had at least three instances of FSD turning into a stretch of roadway that has two or more lanes, and not selecting a lane confidently as it has in past versions.
I think Tesla FSD v14.3.6 is a regression from previous .3 branches
This version in particular has been incredibly hesitant, jerky, and indecisive at times. There’s actually been two drives that I have decided to not used FSD for the remainder of the trip. These were local trips… pic.twitter.com/YobHDOKRS6
— TESLARATI (@Teslarati) July 26, 2026
Instead, the car will drive over one of the dashed road lines, and the steering wheel will jerk back and forth before picking the lane. It should be said that it has always picked the correct lane when choosing based on the navigation, but it is still very indecisive. The steering wheel jerking is reminiscent of some of the later versions of v13.
I admit I really hate to see the steering wheel jerking come back. However, I think when Tesla releases v14.3.7, it won’t be present. When there are occurrences of it in FSD versions, it is usually resolved by the following release.
FSD Disregards Manual Turn Signals
This is my biggest bone to pick with FSD other than Navigation issues, but this one seems like it would be such an easy fix.
If Tesla is going to put the word “Supervised” on the end of “Full Self-Driving,” then when I tell the car to do something, it should do it. If I input an increase in speed by pressing the accelerator, the car will immediately respond. It does not disregard my input because it feels it is traveling at the right speed.
FSD should never disobey and turn off turn signals that the driver inputs. Trying to direct the car into the correct lane, I had initiated the left turn signal not once, not twice, but three times, with the car turning it off all three times and continuing in a lane that would end in just one block. The only solution at this point would be to zipper merge.
This goes back to the fact that self-driving’s biggest bottleneck might be rider preference. A zipper merge might have been more than reasonable, might have saved me time that I spent sitting through an additional light cycle, and might be something many drivers would do. I was in no hurry, I traditionally do not try to zipper merge because it feels inconsiderate, and lastly, the car should have just followed my input.
This caused me to disengage and drive manually the rest of the way home. Sometimes I just do not need FSD to try to pass every car it can at intersections.
Bird Braking is a Thing of the Past
The big complaint with recent versions of Full Self-Driving has been what we’ve coined as “bird braking,” which is when the car will brake suddenly as a bird flies past.
There have been zero issues with this so far in v14.3.6, which is an excellent improvement.
FSD Might Already Be Taking Note of Driver Preferences
Another thing I have noticed over the past few days is that v14.3.6 seems to already be taking my preferences with navigation into account.
This is something that is supposed to be rolling out with the Summer Update, but I have a hunch it’s already present and might have been included in this v14.3.6 build. On Friday, FSD pulled into an entrance to a local convenience store that it had never attempted to go into before.
Typically, I manually pull into this entrance because it avoids heavy cross traffic at the main entrance. FSD has always chosen that congested main entrance.
I don’t want to get anyone excited but my Tesla running FSD v14.3.6 just:
✅ Pulled into an entrance at my local Sheetz that I routinely pull into manually but FSD never has entered
✅ Pulled into my assigned parking space at home despite many other spots being vacant https://t.co/ZUShvknTWO pic.twitter.com/83O5a2S0eh
— TESLARATI (@Teslarati) July 24, 2026
Additionally, FSD has pulled into my assigned parking spot at my townhouse community on multiple occasions with this release. This is something that used to happen ocassionally, but not consistently.
It also navigated back to the same convenience store last night, drove through crazy cars scrambling to gas pumps, navigated out of the parking lot correctly, drove me home, and, once again, parked in my assigned spot.
As previously stated, this release just seems to have a few things that need to be brought to Tesla’s attention, and also to make others who use FSD aware of some things that I’ve experienced. I look forward to the next release that will remedy these issues, just as Tesla has always done in the past.
Elon Musk
Musk’s massive Terafab project will get final location soon
Elon Musk’s massive Terafab project, which will be the first true conglomeration between each of his major entities, is set to get its final location soon, the CEO said on Tesla’s recent earnings call.
“The Terafab, we expect to announce a location soon, and provide more details about our plans in that regard. We’ll leave that to the product, the launch announcement rather than try to squeeze it into an earnings call,” Musk said last Wednesday.
Tesla Terafab set for launch: Inside the $20B AI chip factory that will reshape the auto industry
Terafab was announced by Musk back in March and was essentially a massive, vertically integrated semiconductor manufacturing project that would provide all the chips the three companies needed for their AI initiatives without needing third-party companies.
The plant will produce over 1 terawatt of AI compute each year, and will help back up projects like Optimus, Full Self-Driving, and other AI-based projects that Musk’s companies are working on.
In April, less than a month after the project was launched, Intel announced it would join the project, contributing manufacturing expertise and consulting to Terafab as a whole. Intel is one of three chip manufacturers that produce sub-5 nanometer chips at scale. TSMC and Samsung are the other two.
However, there was no true indication of where Terafab would end up, but most believe it will likely be somewhere in Texas. Business Insider has reported that SpaceX plans to build out Terafab in Grimes County, Texas, but this is unconfirmed.
Musk confirmed recently that it would not be on Giga Texas property, as it is simply too large.
The sheer scale of TERAFAB is going to be insane.
Elon said it wouldn’t be suitable for anywhere on Giga Texas property because it’s too big:
“We couldn’t possibly fit the Terafab on the GigaTexas campus. It will be far bigger than everything else combined there.
Several… pic.twitter.com/79GbhNNuf4
— TESLARATI (@Teslarati) March 23, 2026
Terafab holds much of Musk’s grand ambitions for the future within its construct. It holds so much responsibility for the future and the biggest projects that Musk’s companies can imagine.
“I think this is a very big announcement and it deserves to have its own day in the spotlight and not be squeezed into an earnings call,” he said. “I do think Terafab is going to be an amazing initiative and a necessary one, and one without which we will be constrained in our ability to scale Optimus production, because we simply won’t have enough AI chips.”
He continued by stating that Terafab is necessary for scaling Optimus, which Musk said could be the biggest product of any kind of all time. “It’s crucial to solve that, and we’ll have to solve memory, logic, and packaging in order to scale Optimus.”

