Connect with us

News

Tesla begins retrofits of Hardware 3 Full Self-Driving computer on selected cars

Published

on

It appears that Elon Musk’s goal of achieving Full Self-Driving is getting closer to reality, with reports from members of the Tesla community indicating that the electric car maker is starting to retrofit selected vehicles with its custom-designed Hardware 3 computer. Tesla considers HW3 as a key to achieving autonomous driving, as indicated by the company in its Autonomy Day event this past April. 

Tesla owner-enthusiast Sofiaan Fraval mentioned on Twitter that his vehicle was given the HW3 retrofit after he took in his 2018 Model S P100D for a voluntary HEPA filter replacement. Upon receiving a report for his vehicle’s service, the Tesla owner was pleasantly surprised to see that service center had installed its HW3 Full Self-Driving computer on his Model S. “Performed the retrofit for the Full-Self Driving computer. Test drove and verified operation,” Tesla wrote. 

Prior to its HW3 retrofit, Fraval’s Model S P100D was equipped with Hardware 2.5. The vehicle had a build date of 04/2018 and was equipped with Tesla’s faster, upgraded MCU. It should be noted that Hardware 3 retrofits are reportedly exclusive for Model S and Model X vehicles for now, and are performed only for selected vehicles. Thus, at this stage, it is pertinent to note that Hardware 3 retrofits are not available on request yet. 

Elon Musk has been pretty open about the idea of retrofitting older vehicles with the company’s custom-designed Full Self-Driving computer. Prior to the company’s Autonomy Day event, Musk had emphasized that HW3 retrofits will be simple, considering that the new computer has the same footprint as its NVIDIA-powered predecessor. The Tesla CEO initially remarked that retrofits will be performed at a service center, though later tweets have indicated that the upgrade could be accomplished by the company’s mobile service team

Advertisement

Tesla’s Hardware 3 computer is specifically designed to achieve Full Self-Driving. Discussing the custom hardware during an appearance at ARK Invest’s For Your Innovation podcast, Musk estimated that Hardware 3 could provide the company’s electric cars with a 1,000% improvement in processing capability compared to the NVIDIA components equipped in Tesla’s HW2 and HW2.5 cars. 

“We can process on the order of 100 frames a second and we really need to do a lot of work in terms of cropping the frames, and sort of bending the pixels, and not going to full resolution on all cameras, that kind of thing with the current hardware. We’re at full frames, full resolution with the Tesla hardware. All cameras, at full resolution, full frames, and it still hasn’t tapped out,” Musk said.

H/T Vincent Yu.

Advertisement

Simon is an experienced automotive reporter with a passion for electric cars and clean energy. Fascinated by the world envisioned by Elon Musk, he hopes to make it to Mars (at least as a tourist) someday. For stories or tips--or even to just say a simple hello--send a message to his email, simon@teslarati.com or his handle on X, @ResidentSponge.

Advertisement
Comments

Elon Musk

Tesla Giga Berlin growth could stall if not “free from external influences”: Elon Musk

The comments were delivered in a pre-recorded video discussion.

Published

on

Credit: Andre Thierig/X

Tesla CEO Elon Musk has reportedly warned that future expansion of Gigafactory Berlin could be jeopardized if the site does not remain “free from external influences.”

Musk’s comments were delivered in a pre-recorded video discussion with employees and came at a sensitive moment for the facility, where union representation has been a recurring issue.

According to reports from Handelsblatt and Der Spiegel, citing participants at the event, Musk suggested that if Giga Berlin is no longer “free from external influences,” further expansion would become unlikely. He did not, however, hint that the plant would shut down.

While Musk did not name IG Metall directly, his remarks were widely interpreted as referencing the union, which is currently the largest faction on the works council but does not hold a majority, as noted in an electrive report. 

Advertisement

The video conversation was conducted between Musk in Austin and Grünheide plant manager André Thierig, then played back to the workforce in Germany. Works council elections are scheduled for early March, heightening the tension between management and organized labor.

The CEO has previously voiced concerns that stronger union influence could limit Tesla’s operational flexibility and long-term strategy in Germany.

Despite the warning on expansion, Musk praised the Giga Berlin site during the same address, describing it as one of the most advanced factories worldwide and highlighting its cleanliness and team culture.

The discussion also reportedly touched on battery cell production. According to attendees cited in German media, Musk indicated that Tesla has begun ramping cell production at the site. That would mark a notable shift from earlier expectations that large-scale cell manufacturing in Brandenburg would not begin until 2027.

Advertisement
Continue Reading

Elon Musk

Tesla Full Self-Driving’s newest behavior is the perfect answer to aggressive cars

According to a recent video, it now appears the suite will automatically pull over if there is a tailgater on your bumper, the most ideal solution for when a driver is riding your bumper.

Published

on

Credit: Tesla

Tesla Full Self-Driving appears to have a new behavior that is the perfect answer to aggressive drivers.

According to a recent video, it now appears the suite will automatically pull over if there is a tailgater on your bumper, the most ideal solution for when a driver is riding your bumper.

With FSD’s constantly-changing Speed Profiles, it seems as if this solution could help eliminate the need to tinker with driving modes from the person in the driver’s seat. This tends to be one of my biggest complaints from FSD at times.

A video posted on X shows a Tesla on Full Self-Driving pulling over to the shoulder on windy, wet roads after another car seemed to be following it quite aggressively. The car looks to have automatically sensed that the vehicle behind it was in a bit of a hurry, so FSD determined that pulling over and letting it by was the best idea:

We can see from the clip that there was no human intervention to pull over to the side, as the driver’s hands are stationary and never interfere with the turn signal stalk.

This can be used to override some of the decisions FSD makes, and is a great way to get things back on track if the semi-autonomous functionality tries to do something that is either unneeded or not included in the routing on the in-car Nav.

FSD tends to move over for faster traffic on the interstate when there are multiple lanes. On two-lane highways, it will pass slower cars using the left lane. When faster traffic is behind a Tesla on FSD, the vehicle will move back over to the right lane, the correct behavior in a scenario like this.

Perhaps one of my biggest complaints at times with Full Self-Driving, especially from version to version, is how much tinkering Tesla does with Speed Profiles. One minute, they’re suitable for driving on local roads, the next, they’re either too fast or too slow.

When they are too slow, most of us just shift up into a faster setting, but at times, even that’s not enough, see below:

There are times when it feels like it would be suitable for the car to just pull over and let the vehicle that is traveling behind pass. This, at least up until this point, it appears, was something that required human intervention.

Now, it looks like Tesla is trying to get FSD to a point where it just knows that it should probably get out of the way.

Continue Reading

Elon Musk

Tesla Megapack powers $1.1B AI data center project in Brazil

By integrating Tesla’s Megapack systems, the facility will function not only as a major power consumer but also as a grid-supporting asset.

Published

on

Credit: Tesla

Tesla’s Megapack battery systems will be deployed as part of a 400MW AI data center campus in Uberlândia, Brazil. The initiative is described as one of Latin America’s largest AI infrastructure projects.

The project is being led by RT-One, which confirmed that the facility will integrate Tesla Megapack battery energy storage systems (BESS) as part of a broader industrial alliance that includes Hitachi Energy, Siemens, ABB, HIMOINSA, and Schneider Electric. The project is backed by more than R$6 billion (approximately $1.1 billion) in private capital.

According to RT-One, the data center is designed to operate on 100% renewable energy while also reinforcing regional grid stability.

“Brazil generates abundant energy, particularly from renewable sources such as solar and wind. However, high renewable penetration can create grid stability challenges,” RT-One President Fernando Palamone noted in a post on LinkedIn. “Managing this imbalance is one of the country’s growing infrastructure priorities.”

Advertisement

By integrating Tesla’s Megapack systems, the facility will function not only as a major power consumer but also as a grid-supporting asset.

“The facility will be capable of absorbing excess electricity when supply is high and providing stabilization services when the grid requires additional support. This approach enhances resilience, improves reliability, and contributes to a more efficient use of renewable generation,” Palamone added.

The model mirrors approaches used in energy-intensive regions such as California and Texas, where large battery systems help manage fluctuations tied to renewable energy generation.

The RT-One President recently visited Tesla’s Megafactory in Lathrop, California, where Megapacks are produced, as part of establishing the partnership. He thanked the Tesla team, including Marcel Dall Pai, Nicholas Reale, and Sean Jones, for supporting the collaboration in his LinkedIn post.

Advertisement
Continue Reading