News
SpaceX Crew Dragon tests SuperDraco rocket engines in new slow-mo video
SpaceX has released a rare video from one of its slow-motion engineering cameras, showing off a Crew Dragon capsule performing a static fire test of its eight SuperDraco rocket engines. With this test now complete, SpaceX and NASA can focus on determining when the same Dragon will be ready to fly a crucial abort test.
After a week or two of delays, on November 13th, SpaceX successfully fired up Crew Dragon capsule C205’s eight SuperDraco abort engines and two Draco maneuvering thrusters in a ground simulation of a flight test planned for the same capsule. Crew Dragon’s eight SuperDraco thrusters are capable of producing a combined thrust of more than 130,000 lbf (570 kN), almost as much thrust as an original SpaceX Merlin 1D engine used on Falcon 9s in the early 2010s.

November 13th’s static fire was required only after Crew Dragon C201 catastrophically exploded just prior to an almost identical test on April 20th, 2019. The historic spacecraft had completed its first orbital launch, ISS rendezvous, docking, reentry, and splashdown less than six weeks prior to that attempted static fire. Although it performed to perfection during that uncrewed Demo-1 spaceflight, it apparently carried an unknown design flaw during that flawless launch.
That flaw became apparent after the spacecraft exploded around 10 seconds prior to a planned static fire of its SuperDraco engines, a test meant to verify vehicle health before SpaceX planned to launch the capsule again to support its In-Flight Abort (IFA). According to a joint SpaceX-NASA investigation, the source of that failure was the flawed decision to use titanium in a pressurized liquid nitrogen tetroxide (NTO) environment, a choice that ultimately resulted in an exotic titanium fire and violent explosion.

SpaceX decided to prevent the issue from recurring by replacing the actuating, titanium check valves with single-use burst disks, meaning that Crew Dragon’s SuperDraco engines will now only be capable of a single ignition each. That limitation is no longer relevant after SpaceX chose years ago to end work on propulsively landing Dragon spacecraft (a la Falcon boosters), thus presumably making burst disks the simplest, cheapest, and fastest change for SpaceX and NASA to re-certify.
Thanks to the speed with which SpaceX was able to respond to Crew Dragon’s April 2019 explosion, the company was able to shuffle its fleet of in-process spacecraft, reassign capsule C205 to Dragon’s IFA test, modify the vehicle to account for necessary changes, ship it to Florida, and static-fire the completed spacecraft a little over six months later. With that static fire test now fully complete and NASA and SpaceX deep into the process of carefully inspecting capsule C205 and poring over the data produced, it’s finally reasonable to start thinking seriously about Crew Dragon’s next flight milestone.

Known as the spacecraft’s In-Flight Abort (IFA) test, that milestone will see capsule C205 launch atop a Falcon 9 booster and upper stage and attempt to escape the rocket after reaching supersonic speeds. That point of maximum aerodynamic and thermal stress during launch – known as Max Q – is one of the most challenging abort scenarios Crew Dragon could face. If C205 is able to successfully perform that in-flight abort, it will verify that the spacecraft is capable of carrying its astronauts to safety at almost any point in flight, from the launch pad all the way to Earth orbit.
NASA and SpaceX will likely announce the IFA launch date within the next week or two and odds remain good that Crew Dragon will be able to fly again before the end of 2019.
Check out Teslarati’s Marketplace! We offer Tesla accessories, including for the Tesla Cybertruck and Tesla Model 3.
Elon Musk
Tesla’s Elon Musk accepts invitation to Israel’s Smart Transportation Conference
The announcement was shared by the Israeli Prime Minister in a post on social media platform X.
Elon Musk has reportedly accepted an invitation from Israeli Prime Minister Benjamin Netanyahu to participate in the country’s Smart Transportation Conference in March 2026.
The announcement was shared by the Israeli Prime Minister in a post on social media platform X.
A call and an invitation
Netanyahu posted on X about Musk, stating in Hebrew: “Last night, I held a joint conference call from Florida with entrepreneur Elon Musk, Minister of Transportation Miri Regev, and the head of the National AI Headquarters, Erez Askal. In the framework of the conversation, Musk responded to my invitation and Minister Regev’s invitation to participate in the Smart Transportation Conference that will be held in March.”
Netanyahu added that he and Musk discussed continuing initiatives such as the promotion of autonomous vehicle laws and the boosting of AI technologies in Israel. This, according to the Prime Minister, is aimed at making the country a global leader in emerging technologies.
“Additionally, we discussed the continuation of collaborations with Tesla and the promotion of the law pertaining to autonomous vehicles. I spoke at length with Musk about promoting and developing artificial intelligence technologies in Israel, and I said in our conversation: We intend to catapult Israel and turn it into a global leader in the field, just as we did in cyber and other technologies,” Netanyahu added.
Tesla FSD’s upcoming rollout in Israel
Elon Musk’s upcoming conference appearance in Israel could hint at Tesla’s upcoming rollout of FSD and its Robotaxi service in the country. Previous reports have hinted that FSD is nearing regulatory approval in Israel, following strong advocacy from local owners and direct intervention from the government.
Nearly 1,000 Tesla drivers petitioned authorities, highlighting FSD’s potential to enhance road safety. Transport and Road Safety Minister Miri Regev responded positively on X, writing “I’ve received the many referrals from Tesla drivers in Israel! Tesla drivers? Soon you won’t need to hold the steering wheel.”
Minister Regev has instructed the ministry’s Director-General to accelerate the approval process, including necessary tests. A dedicated working group, led by Moshe Ben-Zaken, is also coordinating with regulatory and safety agencies to meet international standards.
News
Tesla China delivery centers look packed as 2025 comes to a close
Needless to say, it appears that Tesla China seems intent on ending 2025 on a strong note.
Tesla’s delivery centers in China seem to be absolutely packed as the final days of 2025 wind down, with photos on social media showing delivery locations being filled wall-to-wall with vehicles waiting for their new owners.
Needless to say, it appears that Tesla China seems intent on ending 2025 on a strong note.
Full delivery center hints at year-end demand surge
A recent image from a Chinese delivery center posted by industry watcher @Tslachan on X revealed rows upon rows of freshly prepared Model Y and Model 3 units, some of which were adorned with red bows and teddy bears. Some customers also seem to be looking over their vehicles with Tesla delivery staff.
The images hint at a strong year-end push to clear inventory and deliver as many vehicles as possible. Interestingly enough, several Model Y L vehicles could be seen in the photos, hinting at the demand for the extended wheelbase-six seat variant of the best-selling all-electric crossover.
Strong demand in China
Consumer demand for the Model Y and Model 3 in China seems to be quite notable. This could be inferred from the estimated delivery dates for the Model 3 and Model Y, which have been extended to February 2026 for several variants. Apart from this, the Model Y and Model 3 also continue to rank well in China’s premium EV segment.
From January to November alone, the Model Y took China’s number one spot in the RMB 200,000-RMB 300,000 segment for electric vehicles, selling 359,463 units. The Model 3 sedan took third place, selling 172,392. This is quite impressive considering that both the Model Y and Model 3 are still priced at a premium compared to some of their rivals, such as the Xiaomi SU7 and YU7.
With delivery centers in December being quite busy, it does seem like Tesla China will end the year on a strong note once more.
News
Tesla Giga Berlin draws “red line” over IG Metall union’s 35-hour week demands
Factory manager André Thierig has drawn a “red line” against reducing Giga Berlin’s workweek to 35 hours, while highlighting that Tesla has actually increased its workers’ salaries more substantially than other carmakers in the country.
Tesla Giga Berlin has found itself in a new labor dispute in Germany, where union IG Metall is pushing for adoption of a collective agreement to boost wages and implement changes, such as a 35-hour workweek.
In a comment, Giga Berlin manager André Thierig drew a “red line” against reducing Giga Berlin’s workweek to 35 hours, while highlighting that Tesla has actually increased its workers’ salaries more substantially than other carmakers in the country.
Tesla factory manager’s “red line”
Tesla Germany is expected to hold a works council election in 2026, which André Thierig considers very important. As per the Giga Berlin plant manager, Giga Berlin’s plant expansion plans might be put on hold if the election favors the union. He also spoke against some of the changes that IG Metall is seeking to implement in the factory, like a 35-hour week, as noted in an rbb24 report.
“The discussion about a 35-hour week is a red line for me. We will not cross it,” Theirig said.
“(The election) will determine whether we can continue our successful path in the future in an independent, flexible, and unbureaucratic manner. Personally, I cannot imagine that the decision-makers in the USA will continue to push ahead with the factory expansion if the election results favor IG Metall.”
Giga Berlin’s wage increase
IG Metall district manager Jan Otto told the German news agency DPA that without a collective agreement, Tesla’s wages remain significantly below levels at other German car factories. He noted the company excuses this by referencing its lowest pay grade, but added: “The two lowest pay grades are not even used in car factories.”
In response, Tesla noted that it has raised the wages of Gigafactory Berlin’s workers more than their German competitors. Thierig noted that with a collective agreement, Giga Berlin’s workers would have seen a 2% wage increase this year. But thanks to Tesla not being unionized, Gigafactory Berlin workers were able to receive a 4% increase, as noted in a CarUp report.
“There was a wage increase of 2% this year in the current collective agreement. Because we are in a different economic situation than the industry as a whole, we were able to double the wages – by 4%. Since production started, this corresponds to a wage increase of more than 25% in less than four years,” Thierig stated.