Connect with us

News

Tesla owner adds exhaust mod to Model 3 after missing engine sounds

Credit: YouTube | sneakerheadinthebayVlogs

Published

on

A Tesla Model 3 owner added an aftermarket sound system to simulate the sounds of a combustion engine in his all-electric sedan.

The addition of the fake exhaust kit allows owners to customize the noise volume and tone of the “engine noise,” giving a full range of customization to the Model 3, making it sound like a petrol-powered car.

A YouTube channel known as SneakerheadinthebayVlogs uploaded a video showcasing the kit itself, along with some brief descriptions of the installation process and also a few clips of the vehicle in action. The custom-wrapped Model 3 is no longer stealthy or silent, as it sounds more like a typical gas-powered sedan with a modified exhaust system.

The kit is manufactured by United Kingdom-based Milltek, a company that manufacturers a series of stainless steel exhaust components, but has also added a series of “Active Sound Generators” for the Model 3, Model S, and Model X to its catalog. Prices run approximately $2,000, or £1,700 in the UK.

Advertisement

SneakerheadinthebayVlogs stated that his reasoning for putting the system on his Model 3 was due to the absence of engine noise, which is something he missed. “Some of you guys may be wondering, ‘Why did you purchase an exhaust for the Tesla?’ The Tesla is cool and all, but I honestly miss the noise of just a regular exhaust. I miss hearing something from the car,” he said. “All my previous cars, they’ve had exhaust modifications, and this is my first electric car.”

He then goes on to mention another YouTube video where the Milltek exhaust was displayed on a Tesla, which caught his interest and convinced him to buy the same system for his vehicle. SneakerheadinthebayVlogs may be talking about a video from Archie Hamilton Racing, which Teslarati covered in the past.

Archie Hamilton Racing’s reasoning for installing the noise system was due to the belief that the world isn’t ready for EVs. “It’s too loud, so when you’re driving along, you get a lot of road noise in the car. Sometimes …it’s just nice to have an engine burbling away rather than just tire and wind noise. It feels more natural to have that,” a spokesperson said in the video.

However, Tesla vehicles built on or after September 1 are equipped with a noisemaker for pedestrian safety when cars are traveling below 19 mph.

Advertisement

The modification is undoubtedly an interesting one, and whether one agrees with its use or not, it will make a Tesla stand out in a crowd of entirely silent electric vehicles.

Watch SneakerheadinthebayVlogs’ video of the Model 3 with an exhaust kit below.

Advertisement

Joey has been a journalist covering electric mobility at TESLARATI since August 2019. In his spare time, Joey is playing golf, watching MMA, or cheering on any of his favorite sports teams, including the Baltimore Ravens and Orioles, Miami Heat, Washington Capitals, and Penn State Nittany Lions. You can get in touch with joey at joey@teslarati.com. He is also on X @KlenderJoey. If you're looking for great Tesla accessories, check out shop.teslarati.com

Advertisement
Comments

News

Tesla Cybercab gets huge nod of support from Texas DOT official

Published

on

Credit: Tesla

The Tesla Cybercab got a huge nod of support from a Texas Department of Transportation official, who said the all-electric ride-hailing vehicle is “a tangible example of how quickly our transportation system is evolving.”

The Cybercab was present at the Texas Department of Transportation’s Texas Innovation Invitational, an event held each year that allows innovative companies to showcase advancements in transportation.

Tesla Cybercab specs revealed: range, curb weight, range ratings, and more

Marc Williams, the Texas Department of Transportation’s Executive Director, sat in a Cybercab and shared his thoughts in an extensive post on LinkedIn.

Advertisement

Williams’s comments show how Tesla, with its Cybercab, is leading the charge of passenger travel and how it’s changing so rapidly. He notes the absence of traditional driving controls as a telltale sign that the Cybercab is a catalyst for major automotive change, taking controls from drivers and turning them into full-time passengers.

“Observing this vehicle firsthand–from its design and butterfly doors to the cargo trunk configuration–provides a tangible example of how quickly our transportation system is evolving. Sitting inside the cabin, the complete absence of traditional driver controls underscores a significant shift in mobility and vehicle design. No steering wheel, no accelerator, no brake. Only a single touchscreen monitor.”

Tesla has had a great relationship with the State of Texas, especially with its Robotaxi ambitions. Currently, Texas has Tesla Robotaxi operating in multiple cities: Dallas, Austin, San Antonio, and Houston. The company’s main manufacturing plant is also located just outside Austin, and Tesla moved its headquarters to the state several years ago.

The Cybercab is a purpose-built, fully autonomous, two-passenger Robotaxi vehicle designed specifically for ride-hailing services. Tesla has said for years it would be built without a steering wheel or pedals present, although there is still quite a bit of debate among the community regarding that potential.

Earlier this week, we received official word that the EPA had provided the Cybercab with a Certificate of Conformity, giving Tesla permission to enter the vehicle into the chain of public commerce. It is officially ready for roads.

The big question for Tesla remains: Can it solve self-driving before the steering-wheel-less Cybercab officially enters production?

Advertisement
Continue Reading

Elon Musk

The Boring Company just doubled its tunneling power in Nashville

The Boring Company’s Prufrock MB2 is commissioned and ready to mine beneath Nashville’s streets.

Published

on

By

boring-company-prufrock-1-2

The Boring Company’s second tunnel boring machine, Prufrock MB2, is officially ready to dig in Nashville. The company confirmed the news on X, posting: “Prufrock-MB2 is ready to mine in Nashville! MB2 commissioning is complete, including the brief 11 rpm rotation shown here. Will MB2 catch up to MB1, who had quite the head start? And Prufrock-MB3 ships in August!”

MB2 arrives with meaningful improvements over its predecessor. Lessons learned from the launch and operation of MB1 have already been applied to MB2 to improve efficiency and prepare the machine for launch.

Traditional tunnel boring machines operate in a stop-and-go cycle, digging roughly five feet, halt, erect precast concrete segments to line the tunnel wall, then resume. That repeated interruption is one of the main reasons conventional tunneling is slow and expensive. Prufrock is designed to install the tunnel liner simultaneously with mining, eliminating the need to stop every five feet. The machine also skips the need for excavated launch pits. Prufrock arrives on a truck, tilts down, and launches into the ground within 24 hours. And when the tunnel is complete, it emerges from the ground and drives to its next launch site on a trailer, eliminating the need for expensive cranes or pit excavation. The machine is also fully electric and runs with zero people in the tunnel during normal operations, controlled remotely from a surface operations center.

It won’t be long before we hear of another major update on The Boring Company’s Music City Loop project – a planned underground transit network beneath Nashville that would move passengers in electric vehicles through a series of tunnels at highway speeds, and bypassing surface traffic entirely. Nashville was selected in part because of its strong rock conditions that suits the Prufrock machines well, and relatively less regulatory hurdles.

Advertisement

Progress has been steady on multiple fronts. All 37 permits and approvals required ahead of tunneling have been obtained, out of 45 total. Key wins include a fully executed TDOT tunnel permit authorizing 25 miles of tunnel, unanimous airport authority approval for a Nashville International Airport station, and the city’s first residential station agreement serving downtown tower residents.

With MB1 already tunneling, MB2 now commissioned, and MB3 shipping in August, Nashville is becoming something of a live proving ground for scaled tunnel boring. The broader ambition is not limited to one city. The Boring Company’s stated goal is to make underground transportation a practical alternative to surface roads across major metro areas. Nashville is one of many cities, including a successful Las Vegas tunnel system, where that idea is being put to the test at real speed.

Continue Reading

News

Tesla urges New Jersey owners to oppose new bill that could block Robotaxi

Published

on

Credit: Grok

Tesla has launched a direct campaign targeting its customers in New Jersey, sending emails that warn of pending legislation that could effectively block true driverless technology in the state.

The email focuses on Senate Bill S.1677 and Assembly Bill A.3968, measures intended to create a three-year autonomous vehicle pilot program but laden with requirements that Tesla argues make unsupervised Robotaxis impossible.

According to the email, the bills impose “restrictions so severe that true driverless deployment would remain illegal.” Specific hurdles include mandates for human safety drivers during operations, multimillion-dollar insurance minimums, reportedly $5 million, and thresholds like 100,000 miles of demonstrated safe autonomous driving before any driverless approval.

Tesla contends these are arbitrary barriers that ignore real-world performance data and favor entrenched competitors over innovative technologies like its Full Self-Driving (FSD) system.

The push comes as Tesla has started expanding Robotaxi operations in states like Texas, where unsupervised vehicles are already providing rides in several cities. New Jersey, by contrast, risks falling behind. The company highlights in the email communication that more than 94 percent of serious crashes result from human error, meaning impairment, distraction, or fatigue. These are all problems that Robotaxis eliminate entirely.

Advertisement

In 2025, New Jersey recorded 582 traffic deaths, underscoring the human cost of delayed adoption.

Tesla’s outreach stresses the transformative potential of robotaxis. For families, they could offer safer school runs without drowsy or distracted drivers. For seniors and people with disabilities, robotaxis promise independence and reliable mobility.

In areas with limited public transit, they could deliver affordable, on-demand transportation, reducing congestion, emissions, and overall transportation costs. Economically, the company warns that restrictive rules could cost New Jersey jobs, innovation investment, and billions in potential growth as autonomous ride-hailing scales elsewhere.

Supporters of the legislation, including Sen. Andrew Zwicker, describe the pilot as a cautious framework with strong safety oversight, including incident reporting, expert task forces, and restrictions in sensitive zones like school areas. They view it as balancing innovation with public protection.

Advertisement

Tesla and pro-AV advocates counter that the bill lacks technology neutrality, creates insurmountable entry barriers for commercial deployment, and prioritizes process over outcomes — effectively functioning as a de facto ban on services like Robotaxi.

This latest clash echoes Tesla’s past battles in New Jersey over direct vehicle sales. The email directs owners to Tesla’s advocacy platform, where they can send customized messages to legislators calling for amendments: outcome-based safety standards, open competition, and clear pathways for fully driverless commercial operations.

As hearings approach, Tesla’s campaign frames the issue as a choice between protecting the status quo and embracing life-saving progress. With robotaxi technology already proving itself in permissive states, New Jersey owners are being asked to ensure their state doesn’t lock out the future of transportation.

Advertisement
Continue Reading