Connect with us

News

Tesla Model X challenged by sports bike at traffic light for impromptu drag race

(Credit: Mancubus99/YouTube)

Published

on

There are many perks to being a Tesla owner. There’s all the fuel savings, the low operating costs, the futuristic interiors, the stellar safety ratings, the bleeding edge tech, and the addictive instant torque. This makes vehicles like the Model X not only fun family haulers, but sleeper cars that have enough speed and quickness to surprise even the most formidable vehicles.

A Tesla owner who runs the Mancubus99 Youtube channel recently shared an experience he had while driving his Model X P100D. The electric vehicle enthusiast was going for his first drive after swapping to his summer performance wheels when interestingly, a biker on a Suzuki GSX-R750 pulled alongside the family hauler at a stop light.

The biker proved to be quite friendly, and after a nod at the Model X owner, both drivers agreed to an impromptu stop light race. The video was captured by the Model X’s suite of cameras, which were recording footage through the vehicle’s TeslaCam feature. And as could be seen from the video, the results of the stop light race were a bit unexpected.

Sports bikes like the Suzuki GSX-R750 are known to be incredibly quick. Being one of the most notable of Suzuki’s sports bikes, the GSX-R750 carries a lot of history, and it’s represented by the later models’ 0-60 mph time of 2.9 seconds and top speed of 146 mph. That’s insanely fast for a two-wheeler, and guaranteed to satisfy the most insatiable speed demons out there.

But when it came to the stop light race against the Model X P100D, the GSX-R750 seemed to miss the start by just a fraction of a second. And unfortunately for the sports bike, that’s all that was needed by the all-electric SUV to take a commanding lead in the informal race. The Model X P100D utilized its instant torque to take off, and it was far ahead by the time the GSX-R750 was able to hit its stride.

Advertisement

Interestingly enough, the Model X’s top-tier variant today actually has specs that hold up well against the Suzuki GSX-R750. As per Tesla’s online configurator, the current Raven Model X Performance is capable of launching from 0-60 mph in 2.6 seconds, while attaining a top speed of 163 mph.

Watch the Tesla Model X P100D take on a Suzuki GSX-R750 in the video below.

Simon is an experienced automotive reporter with a passion for electric cars and clean energy. Fascinated by the world envisioned by Elon Musk, he hopes to make it to Mars (at least as a tourist) someday. For stories or tips--or even to just say a simple hello--send a message to his email, simon@teslarati.com or his handle on X, @ResidentSponge.

Advertisement
Comments

Investor's Corner

Cantor Fitzgerald raises Tesla PT To $510, citing Cybercab, Semi, and AI momentum

Published

on

Credit: Tesla Asia/X

Cantor Fitzgerald has boosted its Tesla (NASDAQ:TSLA) price target from $355 to $510 per share, maintaining an “Overweight” rating over its continued confidence in the company’s long-term growth. 

Analyst Andres Sheppard cited upcoming production milestones for the Cybercab, Semi, and Optimus as key drivers behind Cantor Fitzgerald’s revised valuation, as well as expanding opportunities in Tesla’s Energy and Full Self-Driving initiatives.

Major growth from multiple Tesla programs

According to Sheppard, Tesla disclosed that volume production for the Cybercab, Semi, and Megapack 3 is on track for fiscal year 2026, with Optimus production lines also targeted to launch next year. The analyst highlighted these updates as “significant,” noting that Tesla’s diverse roadmap continues to reinforce its position as a vertically integrated energy and AI company.

Cantor Fitzgerald now expects Tesla’s capital expenditures at approximately $9.2 billion for FY2025 and around $12 billion for FY 2026, a substantial increase tied to the company’s efforts to further scale its operations. The analyst noted that these investments align with Tesla’s push into robotics, autonomous driving, and energy storage.

Confidence in AI-driven expansion

Tesla shares closed at $433.72 last Friday, giving Cantor Fitzgerald’s $510 price target an implied upside of roughly 17.6%. The revised forecast reflects the firm’s expectation that Tesla’s long-term value extends far beyond vehicle sales, with strong upside from the company’s FSD, Robotaxi/Cybercab, Semi, and Optimus initiatives, as noted in a StreetInsider report.

Advertisement

“Overall, we remain bullish on TSLA over the medium to long term,” Sheppard wrote. “We continue to see meaningful future upside from Energy Storage & Deployment, FSD, Robotaxis/Cybercab, Semis, and Optimus Bots.”

Tesla highlighted these key initiatives in its Q3 2025 Update Letter. “We continue to evolve and augment our product lineup with a focus on cost, scale and future monetization opportunities via services powered by our AI software. Cybercab, Tesla Semi and Megapack 3 are on schedule for volume production starting in 2026,” the company wrote.

Continue Reading

News

Tesla is ramping its hiring for Cybercab vehicle manufacturing roles

A check of the company’s Careers website shows 30 open positions tied to the Cybercab project, with 25 focused directly on vehicle manufacturing.

Published

on

Credit: Tesla/YouTube

Tesla is accelerating preparations for its upcoming Cybercab by rapidly expanding its hiring efforts in Austin, Texas. 

A check of the company’s Careers website shows 30 open positions tied to the Cybercab project, with 25 focused directly on vehicle manufacturing. The spike in listings suggests that Tesla may be gearing up for a production ramp of its fully autonomous two-seater at Giga Texas.

New Cybercab job listings

Tesla’s Careers page now features several new roles that appear crucial to the Cybercab’s buildout. Among the most recent additions are openings for Engineering Technicians for the Cybercab’s drive units, battery pack, and general assembly, as well as positions for Equipment Technicians for the vehicle’s production lines.

Earlier this month, Tesla only had three openings related to the autonomous two-seater’s manufacturing. Even then, it was already exciting as the Cybercab would be produced using Tesla’s “Unboxed” manufacturing process. This process is designed to make the Cybercab easier and quicker to produce. 

Similar to previous Cybercab-related job listings, all of the openings are currently based in Austin, Texas. This suggests that for now, at least, the production of the Cybercab will really be focused on Giga Texas to start.

Advertisement

Ultra-fast Cybercab production targets

Tesla CEO Elon Musk has described the Cybercab as the company’s highest-volume vehicle yet, targeting an annual production rate of around 2 million units. He added that the Cybercab line will operate more like a “high-speed consumer electronics” assembly process than a conventional car factory.

“If you’ve seen the design of the Cybercab line, it doesn’t look like a normal car manufacturing line,” Musk said earlier this year. “It looks like a really high-speed consumer electronics line. In fact, the line will move so fast that actually people can’t even get close to it.”

Continue Reading

Elon Musk

Memphis to use xAI taxes for neighborhood improvements: “Truly a blessing”

City officials confirmed that the funds will be reinvested in local neighborhoods near xAI’s Colossus supercomputer.

Published

on

Credit: xAI/X

The City of Memphis has collected all taxes owed by Elon Musk’s xAI before the payment deadline, creating a $3.2 million special revenue fund to support communities affected by the company’s operations. 

City officials confirmed that the funds will be reinvested in local neighborhoods near xAI’s Colossus supercomputer.

Directing xAI funds toward community projects

Mayor Paul Young’s administration recently outlined how the funds will be allocated. The initiative was focused on improving infrastructure and quality of life in neighborhoods impacted by xAI’s construction and operations. 

Councilwoman Yolanda Cooper-Sutton emphasized that the process will include public input, with surveys already distributed to residents to guide spending priorities, according to ABC24.

“With that ordinance, we are in the near future getting ready to set up the committee because this is the people’s money,” Cooper-Sutton said. “We wanna make sure that it is used for the people.”

Advertisement

Officials noted that they are planning to present a final proposal to the entire council after reviewing community feedback. Cooper-Sutton added that the program represents a step toward ensuring businesses operating in Memphis treat residents “fairly and with equality.”

“It is truly, truly a blessing. What we are doing here at this body and this council, we wanna make sure that whatever business that comes here, that the people are treated fairly and with equality,” she stated. 

xAI partnership fuels local job opportunities

Beyond tax revenue, xAI’s growing presence is expected to bolster Memphis’ workforce development goals. Earlier this month, the artificial intelligence startup co-hosted a job fair at Crosstown Concourse with the American Job Center to connect residents with new employment pathways.

“We know that jobs are coming. We know that talent is here,” Melody Freemon, executive director of the Greater Memphis Workforce Development Board, stated. “We wanna make sure we’re not just putting people in any ole jobs. We wanna put people on a pathway to self-sustainability. We wanna put people on a pathway to self-sustainability and something they can rely on in the future.”

Freemon also noted that the Greater Memphis Workforce Development Board was able to make a favorable offer to xAI. “We promised that we can provide a pipeline. This is the central hub for connection. This is where job seekers are, so let us take the headache off of your hiring needs. Come here, let us source the people and make sure that we meet the demand,” Freeman stated.

Advertisement
Continue Reading

Trending