Connect with us

News

SpaceX Starship hop debut aborted at the last second by Raptor engine

A SpaceX Starship prototype was forced to automatically abort a hop debut milliseconds before liftoff. (SpaceX)

Published

5 years ago

on

SpaceX’s full-scale Starship hop debut was aborted at the last second after an otherwise successful lead-up to the milestone, forcing the company to try again tomorrow.

Following a minor delay from August 2nd to August 3rd, SpaceX kicked off Starship SN5’s hop debut preparations relatively late into the 12-hour window, closing the highway and clearing the pad around 5pm CDT (22:00 UTC). The Starship SN5 tank section prototype was pressurized with ambient-temperature gas around the same time, while cryogenic liquid methane and oxygen propellant loading appeared to begin at roughly 6:20pm CDT (23:20 UTC).

Soon after, SpaceX CEO Elon Musk revealed that Starship was just 33 minutes away from launch, marching towards the first hop of a full-scale prototype at 6:56pm CDT. Unfortunately, possibly much less than a second before ignition, Starship SN5’s Raptor engine had different plans.

Musk says that one of Raptor engine SN27’s “spin start valves” failed to open moments before ignition, causing Starship to automatically abort the attempt. With more than an hour left in the window, SpaceX had time to briefly troubleshoot the bug and potentially turn the rocket around for a second attempt, but Musk announced some 50 minutes later that the company would stand down and try again tomorrow.

Musk’s description of the hop test abort sounds suspiciously similar to his description of the last abort of Starship SN5’s Raptor engine static fire test, in which a “fuel spin valve didn’t open.” If the root cause of both aborts is the same, there’s a good chance that SpaceX may need more time to properly investigate and fix the problem. A recurring issue is immediately much more concerning compared to a one-off bug, so there’s also a chance that SpaceX will go as far as replacing the Raptor engine currently installed on Starship SN5.

Advertisement
Raptor SN27 was installed on Starship SN5 around July 3rd or 4th. (NASASpaceflight – bocachicagal)

If things look more severe than SpaceX initially thought they were after the static fire abort and a replacement engine is necessary, Starship SN5 will have to complete another static fire test with the new Raptor before it can proceed to a second hop attempt.

Based on live views of the launch attempt from NASASpaceflight and LabPadre, Starship SN5 likely aborted a matter of milliseconds before Raptor SN27 ignition and perhaps just a second or two before liftoff. Just like SpaceX’s workhorse Falcon 9 and Heavy rockets, the vehicle’s flight computer is fully in control of the countdown a minute or two before liftoff and can automatically abort far faster than any human could possibly react. Held to the launch mount by hold-down clamps, Starship could have technically analyzed the engine’s performance after ignition and aborted the launch even later into the count.

Once hold-down clamp release is commanded, Starship SN5 will attempt to fly a roughly 150m-tall (500 ft) arc heading southeast of the launch mount. Perhaps 10 seconds prior to touchdown, Starship will attempt to deploy an array of six odd legs and gently land a few hundred feet from the pad. As of now, assuming Raptor’s finicky valve can be easily rectified, SpaceX will work towards a second Starship SN5 hop attempt sometime between 8am and 8pm CDT on Tuesday, August 4th.

Check out Teslarati’s Marketplace! We offer Tesla accessories, including for the Tesla Cybertruck and Tesla Model 3.

Related Topics:

Eric Ralph is Teslarati's senior spaceflight reporter and has been covering the industry in some capacity for almost half a decade, largely spurred in 2016 by a trip to Mexico to watch Elon Musk reveal SpaceX's plans for Mars in person. Aside from spreading interest and excitement about spaceflight far and wide, his primary goal is to cover humanity's ongoing efforts to expand beyond Earth to the Moon, Mars, and elsewhere.

Advertisement
Comments

Investor's Corner

Tesla analyst says this common earnings narrative is losing importance

“Numbers are going down next year, but that’s ok because it’s all about autonomy.”

Published

2 hours ago

on

October 21, 2025

By

(Credit: Tesla)

A Tesla (NASDAQ: TSLA) analyst is doubling down on the idea that one common earnings narrative is losing importance as the company continues to work toward new technologies and projects.

This week, Tesla will report earnings for the third quarter, and one thing people always pay attention to is deliveries. Although Tesla reveals its deliveries for the quarter well before it reports earnings, many investors will look for commentary regarding the company’s strategy for responding to the loss of the $7,500 tax credit.

Tesla has made a few moves already, including a lease deal that takes a substantial amount of money off, launching new Standard models, and cutting up to 23 percent off of lease pricing.

Tesla makes crazy move to spur short-term demand in the U.S.

However, analysts are looking at the company in a different light.

Aligning with the narrative that Tesla is not just a car company and has many different projects, Gene Munster of Deepwater Asset Management believes many investors need to look at another part of the business.

Munster said the delivery figures for Q3, which landed at 497,099, the highest in company history, were padded by customers rushing to showrooms to take advantage of the expiring tax credit.

He believes that deliveries will be more realistic in subsequent quarters, but investors should not worry because the focus on Tesla is not going to be on how many cars it hands over to customers:

“Numbers are going down next year, but that’s ok because it’s all about autonomy.”

Tesla has been working nonstop to roll out a dedicated Robotaxi platform in various cities across the United States, and has already launched in two states: Texas and California.

It has also received regulatory approvals to test driverless Robotaxis in Arizona and Nevada, while seeking permissions in Florida and other states, according to the company’s online job postings.

Munster continued:

“Most people are hyper-focused on the Robotaxi opportunity and not focused as much on FSD.”

While Robotaxi is incredibly important, Tesla’s Full Self-Driving (Supervised) suite is also extremely crucial moving forward, as it sets the stage for the company to roll out a formidable self-driving service.

Tesla rolled out its newest FSD software to more owners last night, and as it expands, the company is gaining valuable data to refine its performance.

Earnings will be reported tomorrow at market close.

Continue Reading

News

Tesla rolled out a new feature with FSD v14 to fix a major complaint

One of the most crucial cameras for FSD operation is located at the top of the windshield, and some owners have complained about condensation or other debris accumulating here, which impacts FSD’s availability during drives.

Published

3 hours ago

on

October 21, 2025

By

Credit: The Kilowatts | X

Tesla rolled out a new feature with Full Self-Driving (Supervised) v14.1.3 in an effort to fix a major complaint from owners.

Tesla’s approach to self-driving is significantly different than other companies as it only relies on cameras for operation. Tesla Vision was launched several years ago and completely axed any reliance the suite had on sensors, as CEO Elon Musk’s strategy was unorthodox and went against the grain.

However, it has proven to be effective, as Tesla still operates the most refined semi-autonomous driving suite in the United States.

There are some drawbacks, though, and one of them has to do with the obvious: cameras get dirty and need to be cleaned somewhat regularly.

One of the most crucial cameras for FSD operation is located at the top of the windshield, and some owners have complained about condensation or other debris accumulating here, which impacts FSD’s availability during drives:

Tesla has been working to confront this issue, and in classic fashion, it used a software update to work on resolving it.

With the rollout of Full Self-Driving v14.1.3 and Software Version 2025.32.8.15, Tesla added a new feature that aims to clean the front camera efficiently without relying on the owner to do it manually.

Tesla Full Self-Driving’s new version officially gets a wider rollout

In its release notes for the suite, it said:

“Added automatic narrow field washing to provide rapid and efficient front camera self-cleaning, and optimize aerodynamics wash at higher vehicle speed.”

If the camera starts to have some issues with visibility, the car will automatically clean the front windshield camera to avoid any issues:

This new addition is a small but mighty change considering all things. It is a necessary process to keep things operational and avoid any disruptions in FSD performance. It is also a testament to how much better Tesla vehicles can get with a simple software update.

Continue Reading

News

Tesla Full Self-Driving’s new version officially gets a wider rollout

So far, v14 has introduced a handful of new features and improvements, but the first versions needed refinement before Tesla made an effort to expand the population. It had issues with a brake stutter, but this has been mostly resolved.

Published

5 hours ago

on

October 21, 2025

By

Credit: Tesla Europe and Middle East | X

Tesla’s newest Full Self-Driving version is officially rolling out wider to customers outside of the Early Access Program (EAP), in preparation for a total launch of the new v14 suite.

Over the past several weeks, Tesla has been working to refine its new v14 Full Self-Driving (Supervised) in an effort to have it ready for the entire fleet of vehicles in the United States. We are lucky enough to be in the EAP, so we’ve been able to test new features and rollouts first-hand.

So far, v14 has introduced a handful of new features and improvements, but the first versions needed refinement before Tesla made an effort to expand the population. It had issues with a brake stutter, but this has been mostly resolved.

Additionally, the rollout of the new Mad Max Speed Profile has gathered some attention.

Now that Tesla has started rolling out v14.1.3 yesterday to EAP members, the company ultimately decided that it was time to expand the software to more vehicles, as many owners are reporting that they’re receiving it:

Additionally, the suite has started to expand to Model S and Model X vehicles, so this rollout is not exclusive to Model 3 and Model Y:

The only issue with this rollout is that it still appears to be missing the Cybertruck, which Tesla was transparent about earlier this month. Although the company planned to release v14 to Cybertrucks by the end of the month, there has been no hint that this is going to happen.

This is already the third iteration of v14 in the past two weeks, indicating that Tesla is truly addressing the shortcomings of past versions and rolling out updates as quickly as possible.

Continue Reading

Trending