Connect with us

News

SpaceX Starship test tank ready for a second shot at destruction

Starship tank SN7.1 is readied for a second shot at a destructive test finale. (NASASpaceflight - bocachicagal)

Published

on

For the fourth time ever, SpaceX is ready to destroy a Starship test tank – the results of which will \determine the next steps for Starship development.

Technically, this will be the second time SpaceX has attempted to destroy Starship test tank SN7.1 following an unsuccessful night of testing on September 17th. Following two days of back-to-back stress tests on the 14th and 15th, successfully proving that SpaceX’s newest test tank and steel alloy can withstand the rigors of suborbital launch, unknown issues scrubbed a third series of tests meant to intentionally destroy SN7.1.

Excluding Starship SN2, thus far the only test tank to survive, SpaceX’s latest intentionally destructive test campaign builds on the controlled failures of two unnamed tanks in January and Starship SN7 in June. SN7.1 is essentially a more complex version of SN7, integrating a “thrust puck” to ensure that SpaceX’s custom steel alloy is also the right choice for the puck-like structure tasked with transferring the thrust of 3-6 Raptor engines through the rest of Starship.

Starship test tanks #1 and #2 are pictured in January 2020. (NASASpaceflight – bocachicagal)
Starship test tank SN2, March 2020. (NASASpaceflight – bocachicagal)
Starship test tanks SN7 and SN7.1, June and September 2020. (NASASpaceflight – bocachicagal)

Theoretically, the 304L-esque alloy SpaceX has decided to replace 301 steel with should make Starships less brittle under cryogenic temperatures, meaning that a breached tank should spring leaks instead of violently bursting. That characteristic would be a boon for vehicle safety and survivability relative to almost any other rocket. With Starship test tank SN7, SpaceX has already demonstrated that its custom steel alloy will gently leak before bursting.

Simultaneously, SN7 is believed to have broken SpaceX’s internal Starship tank pressure record despite having multiple flawed welds, meaning that SN7.1 could reach even higher pressures if SpaceX has since improved build quality.

Ironically built well before test tank SN7.1, SpaceX has already completed the tank section of SN8 – the first full-size Starship to exclusively use the company’s custom steel alloy. Given that SN7.1 has already survived two full nights of nondestructive tests, it’s safe to say that SpaceX is likely happy with the tank’s performance and that the viability of 304L steel has been thoroughly vetted. In the unlikely event that any unsavory discoveries are made in the process of destroying test tank SN7.1, that might change, but the purpose of destructive tank testing is less to qualify new designs than it is to push the more abstract limits of materials and manufacturing techniques.

Advertisement

As previously discussed on Teslarati, it remains to be seen if SpaceX will begin testing Starship SN8 before the prototype has been fully outfitted with a nosecone, plumbed header tanks, and four flaps. If SpaceX does choose to test SN8 prior to completion, the prototype could be ready to head to the launch pad almost as soon as SN7.1 is destroyed.

SN7.1’s final test window stretches from 9pm to 6am CDT (UTC-5) on September 21st with an identical backup on the 22nd. The test will be streamed by NASASpaceflight (until SN7.1 has burst or the window has closed) and LabPadre (a 24/7 feed).

Check out Teslarati’s Marketplace! We offer Tesla accessories, including for the Tesla Cybertruck and Tesla Model 3.

Eric Ralph is Teslarati's senior spaceflight reporter and has been covering the industry in some capacity for almost half a decade, largely spurred in 2016 by a trip to Mexico to watch Elon Musk reveal SpaceX's plans for Mars in person. Aside from spreading interest and excitement about spaceflight far and wide, his primary goal is to cover humanity's ongoing efforts to expand beyond Earth to the Moon, Mars, and elsewhere.

Advertisement
Comments

News

Tesla recalls 6,197 Cybertrucks for light bar adhesive issue

On October 20, Tesla issued a voluntary recall of the impacted vehicles and has identified 619 warranty claims and just a single field report that is related to the issue. 

Published

on

Credit: Francisco Garcia (via Greggertruck on X)

Tesla has recalled 6,197 Cybertrucks for a light bar adhesive issue that was utilized by Service to install the aftermarket part.

According to the National Highway Traffic Safety Administration (NHTSA), impacted vehicles may have had the light bar “inadvertently attached to the windshield using the incorrect surface primer.”

Tesla identified an issue with the light bar’s adhesion to glass back in February and worked for months to find a solution. In October, the company performed chemical testing as a part of an engineering study and determined the root cause as the BetaPrime primer it utilized, figuring out that it was not the right surface priming material to use for this specific application.

On October 20, Tesla issued a voluntary recall of the impacted vehicles and has identified 619 warranty claims and just a single field report that is related to the issue.

The component is manufactured by a Romanian company called Hella Romania S.R.L., but the issue is not the primer’s quality. Instead, it is simply the fact that it is not the correct adhesive for this specific type of application.

Tesla says there are no reports of injuries or deaths due to this issue, and it will be resolved. In the 473 report that the NHTSA released this morning, Tesla said:

“At no charge to customers, Tesla will inspect the service-installed optional off-road light bar accessory for delamination or damage and if either is present, replace the light bar with a new light bar adhered with tape and a positive mechanical attachment. If no delamination or damage is present, Tesla will retrofit the service-installed optional off-road light bar accessory with a positive mechanical attachment.”

This is the third recall applied to Cybertrucks this year, as one on March 18 highlighted the potential for exterior trim panels to detach while driving, and another earlier this month when the NHTSA said its front parking lights were too bright.

Tesla resolved the first with a free assembly replacement, while the headlight issue was fixed with an Over-the-Air software update earlier this week. Owners said there was a noticeable difference in the brightness of the lights now compared to previously.

Continue Reading

Investor's Corner

Tesla investor Calpers opposes Elon Musk’s 2025 performance award

Musk’s 2025 pay plan will be decided at Tesla’s 2025 Annual Shareholder Meeting, which will be held on November 6 in Giga Texas.

Published

on

Credit: Tesla China

One of the United States’ largest pension funds, the California Public Employees’ Retirement System (Calpers), has stated that it will be voting against Elon Musk’s 2025 Tesla CEO performance award. 

Musk’s 2025 pay plan will be decided at Tesla’s 2025 Annual Shareholder Meeting, which will be held on November 6 in Giga Texas. Company executives have stated that the upcoming vote will decide Tesla’s fate in the years to come.

Why Calpers opposes Musk’s 2025 performance award

In a statement shared with Bloomberg News, a Calpers spokesperson criticized the scale of Musk’s proposed deal. Calpers currently holds about 5 million Tesla shares, giving its stance meaningful influence among institutional investors.

“The CEO pay package proposed by Tesla is larger than pay packages for CEOs in comparable companies by many orders of magnitude. It would also further concentrate power in a single shareholder,” the spokesperson stated.

This is not the first time Calpers has opposed a major Musk pay deal. The fund previously voted against a $56 billion package proposed for Musk and criticized the CEO’s 2018 performance-based plan, which was perceived as unrealistic due to its ambitious nature at the time. Musk’s 2018 pay plan was later struck down by a Delaware court, though Tesla is currently appealing the decision.

Advertisement

Musk’s 2025 CEO Performance Award

While Elon Musk’s 2025 performance award will result in him becoming a trillionaire, he would not be able to receive any compensation from Tesla unless aggressive operational and financial targets are met. For Musk to receive his full compensation, for example, he would have to grow Tesla’s market cap from today’s $1.1 trillion to $8.5 trillion, effectively making it the world’s most valuable company by a mile. 

Musk has also maintained that his 2025 performance award is not about compensation. It’s about his controlling stake at Tesla. “If I can just get kicked out in the future by activist shareholder advisory firms who don’t even own Tesla shares themselves, I’m not comfortable with that future,” Musk wrote in a post on X.

Continue Reading

News

Tesla Cybercab is heading to China’s import expo

The event will take place from November 5–10 at Shanghai’s National Exhibition and Convention Center.

Published

on

Credit: Tesla Europe & Middle East/X

Tesla will make its return to the China International Import Expo (CIIE) this November, marking its first appearance at the event since 2022. The U.S. electric vehicle maker confirmed it will showcase its highly anticipated Cybercab, which will make its Asia-Pacific debut during the event. 

The expo will take place from November 5–10 at Shanghai’s National Exhibition and Convention Center.

Tesla Cybercab in China

Tesla announced its participation in the event on its official Weibo account. As per the electric vehicle maker, it would be occupying Booth A3-03 in Hall 2.1 at the National Exhibition and Convention Center. As noted in a CNEV Post report, the Cybercab, the company’s dedicated autonomous two-seater Robotaxi, will be making its Asia-Pacific debut at the CIIE as well. 

The company shared a graphic on Chinese social media which showed an image featuring several Tesla products, such as the Cybercab, Optimus, and Megapack batteries. The graphic also featured a building that read “Master Plan Part IV.”

Tesla’s momentum in China

Tesla’s return comes after skipping the event last year. Interestingly enough, Tesla attended the event from 2018 all the way to 2023. Tesla’s return to the CIIE then aligns with the company’s efforts to attract consumer interest in the world’s most competitive electric vehicle market. 

The Cybercab’s presence in the event could suggest that Tesla might be interested in bringing its Robotaxi to the country. This is quite interesting as China is already home to several autonomous ride-hailing services, though Tesla’s pure vision approach, which focuses on artificial intelligence and cameras, is quite unique. So far, Tesla has only rolled out its autonomous ride-hailing services in Austin, Texas, and the Bay Area, California.

Advertisement
Continue Reading

Trending