News
Tesla produces one Model Y every 2 minutes, media finds after Giga Shanghai tour
Chinese motoring outlet Pacific Automotive Network was recently granted limited access to the Phase 2 area of Gigafactory Shanghai, which produces the Model Y. Over the course of its exclusive tour, the media outlet observed several interesting tidbits about the state of the electric car maker’s Model Y production line. One of these is the fact that Giga Shanghai’s Phase 2 zone is already building an average of 700 Model Y per day.
According to the media outlet, the Model Y line in the Shanghai-based plant currently has a converted production cycle of 29 jobs per hour. This means that Tesla China, despite only producing the all-electric crossover for a few months, is already capable of building one Model Y every two minutes. That’s an impressive milestone, especially considering that this translates to an annual run-rate of about 250,000 vehicles.
Local projections for the Model Y line in Giga Shanghai’s Phase 2 zone estimate that the facility would have an annual production capacity of 200,000 vehicles this year. Considering that Tesla is already producing an average of 700 Model Y per day, however, this 200,000-vehicle target may very well be exceeded by the end of the year. Tesla’s Q4 FY 2020 Update Letter also estimated Giga Shanghai to produce a total of 450,000 Model 3 and Model Y this year, a number that seems conservative considering the current pace of the all-electric crossover’s manufacturing ramp.
Apart from its observations about the Model Y’s output, PC Auto also shared several insights and observations from Gigafactory Shanghai’s Phase 2 zone. These include Tesla’s use of a two-story layout for the vehicle’s production line, which enables a seamless assembly of the vehicle. Also notable were the cleverly-placed logistics doors on the side of the Phase 2 building, which allows parts and components to be taken to the production line directly after they are delivered. Interestingly enough, the entire complex was also observed to be immaculately clean and tidy, which the motoring outlet noted is quite rare to see in a vehicle manufacturing plant.
Of course, no trip to a Model Y production line would be complete without a look at the Giga Press, which produces the all-electric crossover’s single-piece rear underbody. The motoring news outlet highlighted that Tesla is pretty much the only company that uses such massive machines, which make the production of the Model Y simpler. This simple assembly process carries over to the Model Y’s wiring as well, which is already far shorter than the 1.5 km of wiring used in the Model 3 at just about 100 meters.
Ultimately, the rare visit to Giga Shanghai’s Model Y facility proved one thing: Tesla’s electric car factories definitely follow their own rhythm. Very little of the Phase 2 building could be considered similar to the factories of traditional automakers, while the majority of the operations in the area are specifically-designed for the company’s vehicles. This emphasis on simplicity and efficiency is evident throughout the entire complex, from the number of components in the Model Y to the design of the production line itself.
Check out PC Auto’s full account of its Giga Shanghai visit here.
Don’t hesitate to contact us for news tips. Just send a message to tips@teslarati.com to give us a heads up.
Tesla entered two new markets this week by advancing its presence in Latvia (Europe) and officially launching operations in Uruguay (South America), marking a rapid dual-continent expansion.
These moves underscore the company’s strategy to tap into emerging EV markets with supportive policies, renewable energy grids, and growing demand for sustainable transport.
Latvia: Strengthening the Baltic Footprint
In Latvia, Tesla has built on its earlier registration of Tesla Latvia SIA in late 2025 with recent steps toward full operations, including job postings for a service center and representation in Riga. This aligns with broader Baltic expansion following Lithuania’s model of pop-up stores and service centers.
Coming to Latvia https://t.co/XNkQQJ2O6a pic.twitter.com/yS9kpcNky1
— Tesla Europe, Middle East & Africa (@teslaeurope) July 17, 2026
EV penetration in Latvia stands at around 7 percent for BEVs in new passenger car registrations. 2025 data showed 1,602 BEVs out of about 22,500 total, or 7.1 percent, with combined plug-ins nearing 19 percent. Growth has been steady but below the European average, supported by government subsidies and infrastructure development. Tesla models like the Model 3 lead local EV registrations.
Vehicles for the Latvian market will likely be sourced from Gigafactory Berlin or Gigafactory Shanghai. Charging infrastructure is robust for the region as well, with over 400- 2,000 public points, with Tesla Superchargers in Riga, Jūrmala, and along Via Baltica routes offering up to 250 kW.
Uruguay: Third South American Country
Tesla teased its Uruguay arrival with “Estamos llegando,” or, “We are arriving,” on social media, followed by an official presentation scheduled for mid-July.
Hola Uruguay 🇺🇾
Nuestros Model 3 y Model Y están cada vez mas cerca! pic.twitter.com/FR41fsA7um
— Tesla Latinoamérica (@Tesla_LatAm) June 30, 2026
The company established Tesla Uruguay SAS, homologated Model 3 and Model Y (three versions each), and appointed local leadership. This makes Uruguay Tesla’s third official South American market after Chile and Colombia.
Uruguay boasts one of Latin America’s highest EV penetrations, with battery-electric vehicles exceeding 20 percent market share recently, driven by tax incentives, high fuel prices, and a nearly 95-100 percent renewable electricity grid. Hundreds of Teslas already operate via grey imports, but official sales bring warranties, service, and support.
Vehicles will be imported from Gigafactory Shanghai, enabling competitive pricing for Model 3 and Model Y. Charging plans include Supercharger development alongside existing infrastructure, leveraging the country’s green energy advantage for affordable operation.
Tesla Superchargers follow Model 3 and Model Y to South American country
Tesla’s Dual Continent Expansion
Tesla’s simultaneous push into Latvia and Uruguay demonstrates efficient scaling: prioritizing service and infrastructure first, then direct sales in high-potential niches. In Europe, it fills Baltic gaps; in Latin America, it counters Chinese dominance while leveraging renewables.
This dual move signals Tesla’s ambition to accelerate global EV adoption amid varying regional paces. By addressing local needs, like subsidies in Latvia or incentives and green grids in Uruguay, Tesla not only boosts volumes but advances its mission of sustainable energy.
For investors and consumers, it highlights resilience and opportunity in diverse markets, potentially paving the way for further growth in underserved regions. With strong fundamentals in both, these entries could yield long-term gains as EV transitions mature worldwide.
SpaceX has announced a new target date for the thirteenth test flight of Starship: Monday, July 20, with the launch window opening at 6:45 p.m ET/5:45 p.m. CT.
This is the first rescheduling attempt of Starship’s 13th test flight. It was set to launch last night, but SpaceX scrubbed the launch attempt.
🚨 SpaceX is now looking at Monday, July 20th at 6:45 p.m ET/5:45 p.m. CT for the 13th test flight of Starship pic.twitter.com/7s8aMJV5Ge
— TESLARATI (@Teslarati) July 17, 2026
CEO Elon Musk revealed that some of the engines on Starship did not start, which automatically triggers a launch abort. Two of the Raptor engines will be removed and replaced.
To be confident of a good flight, 2 Raptors will be removed & replaced. Most probable launch timing is early next week.
— Elon Musk (@elonmusk) July 17, 2026
SpaceX officially announced the new launch window this morning.
Starship’s 13th test launch comes with a few new objectives, but SpaceX does not plan to attempt a catch of the booster, which it has done several times in the past.
For Starship’s Upper Stage, there are some adjustments to ensure engine reusability that will be assessed during the ascent, and 20 operational Starlink V3 satellites are also set to make their way into space. SpaceX also plans to attempt an in-space relight of a single Raptor engine, which is a critical demonstration for future orbital deorbit, refueling, and deep space maneuvers.
Ultimately, it will splash down in the Indian Ocean.
The continuous tests help SpaceX advance the Starship program toward eventual full reusability, operational Starlink V3 deployment, and future missions, which include NASA’s Artemis program.
Elon Musk
SpaceX Starship Flight 13 aborted at Zero and Musk just told us what broke
Four Raptor engines failed to ignite at T-zero, forcing SpaceX to scrub Starship Flight 13 Thursday.
SpaceX scrubbed the Starship Flight 13 launch attempt Thursday evening at the last possible moment, after four of the Super Heavy booster’s 33 Raptor 3 engines failed to ignite during the startup sequence. The 90-minute window had opened at 6:45 p.m. EDT from Starbase in Boca Chica, Texas, and the countdown had proceeded without issue all day, with more than 11.5 million pounds of liquid methane and liquid oxygen being fully loaded into the rocket before the automated abort triggered. SpaceX’s launch directors posted on X, “Standing down from today’s flight test attempt,” and shut down the livestream shortly after.
Musk confirmed the root cause within hours. “Some of the engines didn’t start, triggering an automatic launch abort,” he wrote on X. “To be confident of a good flight, 2 Raptors will be removed and replaced. Most probable launch timing is early next week.” SpaceX engineers began draining propellant tanks immediately and Booster 20 was rolled back to its hangar for inspection.
The timing adds a layer of significance that did not exist during any of the previous 12 Starship flights. This is the first time SpaceX has attempted to launch Starship since the company made its stock market debut in June, listing under ticker SPCX at $135 per share. Public investors are now watching every Starship outcome in real time, and a last-second abort carries more visibility than it would have six months ago.
Flight 13 was designed to be one of the most consequential tests in the program’s history. It was set to carry 20 Starlink V3 satellites, the first operational payload Starship has ever attempted to deploy. Six of those satellites carried external cameras to photograph Starship’s heat shield from the outside during flight, which would act as a self-inspection approach SpaceX has never attempted before. The mission also needed to complete a Raptor engine relight in space, a step SpaceX skipped on Flight 12 in May after losing an engine during ascent. That Flight 12 booster also flipped 90 degrees off course during its boostback burn when five engines failed to reignite.
SpaceX has not announced an official next launch date. Musk’s “early next week” window points to July 21 or 22 at the earliest, pending the engine swap and a return to the pad.
Tesla enters two new markets on two different continents in one week
SpaceX announces new Starship 13 test flight target date
