Connect with us

News

Tesla’s Yoke Steering Wheel: NHTSA gives new statement

(Credit: Tesla)

Published

on

The National Highway Traffic Safety Administration (NHTSA) has given an updated statement regarding Tesla’s new Yoke Steering Wheel, which comes as an option with the refreshed Model S and Model X.

The NHTSA told Teslarati this morning:

NHTSA is aware of the recently launched Tesla steering yoke in certain Model S vehicles. We requested and received information from Tesla about the steering yoke and we remain actively engaged with the company during our review. NHTSA routinely engages with auto manufacturers and suppliers to better understand the new technologies and features they develop and introduce to the U.S. fleet.”

Since early February, the NHTSA has been actively reviewing the Yoke Steering Wheel when the agency indicated that it “cannot determine if the steering wheel meets Federal Motor Vehicle Safety Standards. We will be reaching out to the automaker for more information.” Since then, Tesla has been communicating with the NHTSA to determine whether the Yoke lines up with its safety standards.

Any car or equipment used with a vehicle that will operate on U.S. roads must comply with the NHTSA’s FMVSS, or Federal Motor Vehicle Safety Standards. Tesla and any other car company has the right and ability to determine internally whether a vehicle or piece of vehicle equipment is compliant with the FMVSS, and can use any means necessary to determine this. Manufacturers can use testing procedures, engineering analytics, or standard testing procedures to determine whether a vehicle or piece of equipment meets the NHTSA’s FMVSS standards. Ultimately, the NHTSA gets the final say, and if a vehicle or piece of equipment is in violation of any of the FMVSS regulations, the agency has the ability to act if it sees a reason to believe that it is noncompliant or has the possibility of causing a safety-related defect.

Advertisement

The NHTSA’s FMVSS regulations are available here.

Tesla is priming customers for a disappearing steering wheel

Tesla unveiled its Yoke steering wheel on January 27th, 2021, during the release of its Q4 2020 Earnings Call Update Letter, when the manufacturer revealed updated pictures of the refreshed Model S interior. Along with several other updates, the most notable and arguably the most talked about feature was the addition of a Yoke steering wheel, giving the Model S an even more sporty interior. First glimpses of the Yoke steering wheel were uncovered this past weekend by The Kilowatts, which showed the newly-designed wheel within a Model S interior.

It has been speculated whether Tesla would be able to keep the Yoke design within its Model S and Model X vehicles. As of now, it appears the NHTSA is still communicating with Tesla, but the Yoke has not given the NHTSA an indication that Tesla has committed any noncompliance or safety-related defects with the new steering wheel design.

Tesla’s new Yoke steering wheel has been approved for use in several regions, including the United Kingdom and the Netherlands.

Advertisement

Joey has been a journalist covering electric mobility at TESLARATI since August 2019. In his spare time, Joey is playing golf, watching MMA, or cheering on any of his favorite sports teams, including the Baltimore Ravens and Orioles, Miami Heat, Washington Capitals, and Penn State Nittany Lions. You can get in touch with joey at joey@teslarati.com. He is also on X @KlenderJoey. If you're looking for great Tesla accessories, check out shop.teslarati.com

News

Elon Musk confirms Tesla FSD V14.2 will see widespread rollout

Musk shared the news in a post on social media platform X.

Published

on

Credit: Whole Mars Catalog/X

Elon Musk has confirmed that Tesla will be implementing a wide rollout of Full Self-Driving (FSD) V14 with the system’s V14.2 update. Musk shared the news in a post on social media platform X. 

FSD V14.1.2 earns strong praise from testers

Musk’s comment came as a response to Tesla owner and longtime FSD tester AI DRIVR, who noted that it might be time to release Full Self-Driving to the fleet because V14.1.2 has already become very refined.

“95% of the indecisive lane changes and braking have been fixed in FSD 14.1.2. I haven’t touched my steering wheel in two days. I think it’s time, Tesla AI,” the longtime FSD tester wrote

AI DRIVR’s comment received quite a bit of support from fellow Tesla drivers, some of whom noted that the improvements that were implemented in V14.1.2 are substantial. Others also agreed that it’s time for FSD to see a wide release.

In his reply to the FSD tester, CEO Elon Musk noted that FSD V14’s wide release would happen with V14.2. “14.2 for widespread use,” Musk wrote in his reply

Advertisement

Mad Max mode makes headlines

One of the key features that was introduced with FSD’s current iteration is Mad Max mode, which allows for higher speeds and more frequent lane changes than the previous “Hurry” mode. Videos and social media posts from FSD testers have shown the system deftly handling complex traffic, merging seamlessly, and maintaining an assertive but safe driving behavior with Mad Max mode engaged.

Tesla AI head Ashok Elluswamy recently noted in a post on X that Mad Max mode was built to handle congested daytime traffic, making it extremely useful for drivers who tend to find themselves in heavy roads during their daily commutes. With Musk now hinting that FSD V14.2 will go on wide release, it might only be a matter of time before the larger Tesla fleet gets to experience the notable improvements of FSD’s V14 update.

Continue Reading

News

Multiple Tesla Cybercab units spotted at Giga Texas crash test facility

The vehicles were covered, but one could easily recognize the Cybercab’s sleek lines and compact size.

Published

on

Credit: @JoeTegtmeyer/X

It appears that Tesla is ramping up its activities surrounding the development and likely initial production of the Cybercab at Giga Texas. This was, at least, hinted at in a recent drone flyover of the massive electric vehicle production facility in Austin. 

Cybercab sightings fuel speculations

As observed by longtime Giga Texas drone operator Joe Tegtmeyer, Tesla had several covered Cybercab units outside the facility’s crash testing facility at the time of his recent flyover. The vehicles were covered, but one could easily recognize the Cybercab’s sleek lines and compact size. Tegtmeyer also observed during his flyover that production of the Model Y Standard seems to be hitting its pace.

The drone operator noted that the seven covered Cybercabs might be older prototypes being decommissioned or new units awaiting crash tests. Either scenario points to a ramp-up in Cybercab activity at Giga Texas, however. “In either case, this is another datapoint indicating production is getting closer to happening,” Tegtmeyer wrote on X, highlighting that the autonomous two-seaters were quite exciting to see.

Cybercab production targets

This latest sighting follows reports of renewed Cybercab appearances at both the Fremont Factory and Giga Texas. A test unit was recently spotted driving on Giga Texas’ South River Road. Another Cybercab, seen at Tesla’s Fremont Factory, appeared to be manually driven, suggesting that the vehicle’s current prototypes may still be produced with temporary steering controls.

The Tesla Cybercab is designed to be the company’s highest-volume vehicle, with CEO Elon Musk estimating that the autonomous two-seater should see an annual production rate of about 2 million units per year. To accomplish this, Tesla will be building the Cybercab using its “Unboxed” process, which should help the vehicle’s production line achieve outputs that are more akin to consumer electronics production lines.

Advertisement
Continue Reading

Elon Musk

Teslas in the Boring Co. Vegas Loop are about to get a big change

Elon Musk has a big update for Teslas that operate within the Boring Company’s Vegas Loop.

Published

on

the boring company's vegas loop entrance
(Credit: Sam Morris, LVCVA/Las Vegas News Bureau)

Tesla vehicles operating in the Boring Company’s Vegas Loop are about to get a big change, CEO Elon Musk said.

In Las Vegas, the Boring Company operates the Vegas Loop, an underground tunnel system that uses Teslas to drop people off at various hotspots on the strip. It’s been active for a few years now and is expanding to other resorts, hotels, and destinations.

Currently, there are stops at three resorts: Westgate, the Encore, and Resorts World. However, there will eventually be “over 100 stations and span over 68 miles of tunnel,” the Vegas Loop website says.

The Loop utilizes Tesla Model 3 and Model Y vehicles to send passengers to their desired destinations. They are currently driven using the Full Self-Driving suite, but they also have safety drivers in each vehicle to ensure safety.

Tesla Cybertruck rides are crucial for Vegas Loop expansion to airport

Tesla and the Boring Company have been working to remove drivers from the vehicles used in the Loop, but now, it appears there is a set timeline to have them out, according to CEO Elon Musk:

Musk says the Boring Co. will no longer rely on safety drivers within the Teslas for operation. Instead, Tesla will look to remove the safety drivers from the cars within the next month or two, a similar timeline for what Musk believes the Robotaxi platform will look like in Austin.

In Texas, as Robotaxi continues to operate as it has since June, there are still safety monitors within the car who sit in the passenger’s seat. They are there to ensure a safe experience for riders.

When the route takes the vehicle on the highway, safety monitors move into the driver’s seat.

However, Tesla wants to be able to remove safety monitors from its vehicles in Austin by the end of the year, Musk has said recently.

In early September, Musk said that the safety monitors are “just there for the first few months to be extra safe.” He then added that there “should be no safety driver by end of year.”

Continue Reading

Trending