News
[Update: fully stacked] SpaceX speeds up work on Starship with “hundreds” of upgrades
Update: Less than 24 hours after publishing, SpaceX began installing Starship SN15’s nose section, stacking the significantly upgraded rocket to its full 50m (~165 ft) height.
Excluding the installation of a few minor ‘aerocover’ surfaces used to smooth out the interface between Starship’s hull and four flaps, SN15 will effectively be complete and ready to roll to the launch pad as soon as its nose and tank sections have been welded together. Historically, for SN8-SN11, that process – including visual and radiographic (x-ray) inspections for quality assurance – has taken as few as one or two days, meaning that SN15 could technically be ready to roll out as early as Monday, April 4th.
Of note, SpaceX has already scheduled a road closure from 7am to noon CDT (UTC-5) on Monday – likely to transport a crane to the pad but potentially enough to get both a crane and SN15 to the launch site. Simultaneously, an upgraded or modified hydraulic ram – used to simulate the thrust of three Raptors – was already moved to the pad and installed on one of two suborbital launch mounts on Saturday, April 3rd, meaning that the pad will likely be ready for SN15’s installation tomorrow.
If SpaceX manages to complete both transport tasks on Monday, odds are very good that SN15 will be able to get through one or several qualification tests – including an ambient-temperature pressure test, cryogenic proof, wet dress rehearsal, and static fire – by the end of the week. Stay tuned for updates!
Beginning almost immediately after Starship SN11’s midair explosion earlier this week, SpaceX has accelerated work on a new Starship prototype upgraded with “hundreds of improvements.”
In November 2020, Musk first revealed plans to implement “major [Starship] upgrades” as early as prototype SN15, though the improvements involved in the first apparent Starship ‘block’ change were never detailed. On 30 March 2021, the same day as Starship SN11’s foggy, ill-fated launch debut, Musk confirmed that the SN15+ block upgrade would feature “hundreds of design improvements [to] structures, avionics, software, and [Raptor engines].”
Around the same time, after more than two months of little to not visible activity, work on Starship SN15 rapidly restarted in an apparent bid to achieve Musk’s stated goal of rolling the rocket to the launch pad “in a few days.”
Possibly due to a significant shift in focus from Starship mass-production to the construction of Boca Chica’s first orbital-class launch pad and flight tests of prototypes SN8 through SN11, Starship SN15 has been in the stacking and assembly phase since the turn of the new year. About a month ago, in early March, the rocket’s tank section was stacked to its full height and has been making slow progress in the weeks since – clearly not a pressing priority.
The day after SN11 exploded, SpaceX stacked the last two pieces of Starship SN11’s nose and joined their plumbing and avionics runs, more or less completing the upper third of the prototype. Both nosecone flaps were installed a few days prior. On the same day, March 31st, SpaceX rolled Starship SN15’s tank section (the bottom two-thirds of the rocket) out of Boca Chica’s ‘mid bay’ assembly building and installed both after flaps before moving the vehicle into the ‘high bay.’
With those steps complete, Starship SN15 should be just a few days away from nose installation, at which point it will need just a few more days of work before SpaceX will be ready to install the rocket on a transporter and roll it to the launch pad. It’s not implausible that that move will happen as early as next week, perhaps even leaving enough time for an acceptance test or two before the weekend.
News
Elon Musk confirms Tesla FSD V14.2 will see widespread rollout
Musk shared the news in a post on social media platform X.
Elon Musk has confirmed that Tesla will be implementing a wide rollout of Full Self-Driving (FSD) V14 with the system’s V14.2 update. Musk shared the news in a post on social media platform X.
FSD V14.1.2 earns strong praise from testers
Musk’s comment came as a response to Tesla owner and longtime FSD tester AI DRIVR, who noted that it might be time to release Full Self-Driving to the fleet because V14.1.2 has already become very refined.
“95% of the indecisive lane changes and braking have been fixed in FSD 14.1.2. I haven’t touched my steering wheel in two days. I think it’s time, Tesla AI,” the longtime FSD tester wrote.
AI DRIVR’s comment received quite a bit of support from fellow Tesla drivers, some of whom noted that the improvements that were implemented in V14.1.2 are substantial. Others also agreed that it’s time for FSD to see a wide release.
In his reply to the FSD tester, CEO Elon Musk noted that FSD V14’s wide release would happen with V14.2. “14.2 for widespread use,” Musk wrote in his reply.
Mad Max mode makes headlines
One of the key features that was introduced with FSD’s current iteration is Mad Max mode, which allows for higher speeds and more frequent lane changes than the previous “Hurry” mode. Videos and social media posts from FSD testers have shown the system deftly handling complex traffic, merging seamlessly, and maintaining an assertive but safe driving behavior with Mad Max mode engaged.
Tesla AI head Ashok Elluswamy recently noted in a post on X that Mad Max mode was built to handle congested daytime traffic, making it extremely useful for drivers who tend to find themselves in heavy roads during their daily commutes. With Musk now hinting that FSD V14.2 will go on wide release, it might only be a matter of time before the larger Tesla fleet gets to experience the notable improvements of FSD’s V14 update.
News
Multiple Tesla Cybercab units spotted at Giga Texas crash test facility
The vehicles were covered, but one could easily recognize the Cybercab’s sleek lines and compact size.
It appears that Tesla is ramping up its activities surrounding the development and likely initial production of the Cybercab at Giga Texas. This was, at least, hinted at in a recent drone flyover of the massive electric vehicle production facility in Austin.
Cybercab sightings fuel speculations
As observed by longtime Giga Texas drone operator Joe Tegtmeyer, Tesla had several covered Cybercab units outside the facility’s crash testing facility at the time of his recent flyover. The vehicles were covered, but one could easily recognize the Cybercab’s sleek lines and compact size. Tegtmeyer also observed during his flyover that production of the Model Y Standard seems to be hitting its pace.
The drone operator noted that the seven covered Cybercabs might be older prototypes being decommissioned or new units awaiting crash tests. Either scenario points to a ramp-up in Cybercab activity at Giga Texas, however. “In either case, this is another datapoint indicating production is getting closer to happening,” Tegtmeyer wrote on X, highlighting that the autonomous two-seaters were quite exciting to see.
Cybercab production targets
This latest sighting follows reports of renewed Cybercab appearances at both the Fremont Factory and Giga Texas. A test unit was recently spotted driving on Giga Texas’ South River Road. Another Cybercab, seen at Tesla’s Fremont Factory, appeared to be manually driven, suggesting that the vehicle’s current prototypes may still be produced with temporary steering controls.
The Tesla Cybercab is designed to be the company’s highest-volume vehicle, with CEO Elon Musk estimating that the autonomous two-seater should see an annual production rate of about 2 million units per year. To accomplish this, Tesla will be building the Cybercab using its “Unboxed” process, which should help the vehicle’s production line achieve outputs that are more akin to consumer electronics production lines.
Elon Musk
Teslas in the Boring Co. Vegas Loop are about to get a big change
Elon Musk has a big update for Teslas that operate within the Boring Company’s Vegas Loop.
Tesla vehicles operating in the Boring Company’s Vegas Loop are about to get a big change, CEO Elon Musk said.
In Las Vegas, the Boring Company operates the Vegas Loop, an underground tunnel system that uses Teslas to drop people off at various hotspots on the strip. It’s been active for a few years now and is expanding to other resorts, hotels, and destinations.
Currently, there are stops at three resorts: Westgate, the Encore, and Resorts World. However, there will eventually be “over 100 stations and span over 68 miles of tunnel,” the Vegas Loop website says.
The Loop utilizes Tesla Model 3 and Model Y vehicles to send passengers to their desired destinations. They are currently driven using the Full Self-Driving suite, but they also have safety drivers in each vehicle to ensure safety.
Tesla Cybertruck rides are crucial for Vegas Loop expansion to airport
Tesla and the Boring Company have been working to remove drivers from the vehicles used in the Loop, but now, it appears there is a set timeline to have them out, according to CEO Elon Musk:
The Tesla cars operating in The Boring Company tunnels under Las Vegas will be driverless in a month or two https://t.co/mX4nNrJui9
— Elon Musk (@elonmusk) October 18, 2025
Musk says the Boring Co. will no longer rely on safety drivers within the Teslas for operation. Instead, Tesla will look to remove the safety drivers from the cars within the next month or two, a similar timeline for what Musk believes the Robotaxi platform will look like in Austin.
In Texas, as Robotaxi continues to operate as it has since June, there are still safety monitors within the car who sit in the passenger’s seat. They are there to ensure a safe experience for riders.
When the route takes the vehicle on the highway, safety monitors move into the driver’s seat.
However, Tesla wants to be able to remove safety monitors from its vehicles in Austin by the end of the year, Musk has said recently.
In early September, Musk said that the safety monitors are “just there for the first few months to be extra safe.” He then added that there “should be no safety driver by end of year.”
The safety driver is just there for the first few months to be extra safe.
Should be no safety driver by end of year.
— Elon Musk (@elonmusk) September 4, 2025
Elon Musk confirms Tesla FSD V14.2 will see widespread rollout
Multiple Tesla Cybercab units spotted at Giga Texas crash test facility
Teslas in the Boring Co. Vegas Loop are about to get a big change
-
Elon Musk1 day agoSpaceX posts Starship booster feat that’s so nutty, it doesn’t even look real
-
Elon Musk10 hours agoTesla Full Self-Driving gets an offer to be insured for ‘almost free’
-
News3 days agoTesla launches new interior option for Model Y
-
News3 days agoTesla launches ‘Mad Max’ Full Self-Driving Speed Profile, its fastest yet
-
News2 days agoTesla widens rollout of new Full Self-Driving suite to more owners
-
News3 days agoTesla makes big move with its Insurance program
-
Elon Musk2 days agoElon Musk was right all along about Tesla’s rivals and EV subsidies
-
News1 day agoTesla FSD gets first rave reviews from media outlets in Japan