News
SpaceX launches third Falcon 9 rocket in 72 hours, breaks fairing reuse record
In one fell swoop, SpaceX has successfully launched the third Falcon 9 rocket in less than 72 hours, broken payload fairing reusability record, and placed the 2000th operational Starlink satellite in orbit.
After a string of delays from January 29th to February 2nd, Falcon 9 finally lifted off at 1:13 pm EST (18:13 UTC), February 3rd with the seventh batch of Starlink V1.5 satellites on a mission coincidentally known as Starlink 4-7. Falcon 9 booster B1061 completed its sixth spaceflight and orbital-class launch without issue, successfully sending an expendable Falcon upper stage and Starlink payload on their way to orbit and touching down on drone ship A Shortfall of Gravitas (ASOG) about nine minutes after liftoff.
While one of the rocket’s two fairing (nosecone) halves flew for the fourth time, the other half completed its sixth launch – a new record for fairing reusability approximately 27 months after SpaceX’s first fairing reuse. The record-breaking half likely last supported Starlink V1 L28 in May 2021. A separate half also flew for the fifth time and was recovered in January 2022. In comparison, it took SpaceX 32 months after the first Falcon booster reuse (March 2017) to launch the same booster for the fourth time and 41 months for the sixth time, highlighting both SpaceX’s growing expertise and how much easier reusing a fairing is relative to a rocket’s entire first stage.
With any luck, both Starlink 4-7 fairing halves will have successfully reentered Earth’s atmosphere, deployed GPS-guided parafoils, gently splashed down in the Atlantic Ocean, and been fished out of the water by a SpaceX recovery ship. SpaceX has never discussed its fairing reusability goals, so it’s unknown how many flights each half is nominally designed to support.
Inside that record-breaking fairing was the latest batch of 49 Starlink V1.5 satellites, which weigh about 30-40 kg (65-90 lb) heavier than Starlink V1 satellites and are mainly set apart by the addition of several laser links. Once enough laser-linked satellites are launched, SpaceX will be able to route user communications through space, precluding the need for a ground station to always be within line of sight of each satellite node. Aside from allowing Starlink to serve exceptionally remote users, laser links will also allow Starlink to break into the multi-billion-dollar aviation and maritime communications markets.
With Starlink 4-7, SpaceX has now launched 351 Starlink V1.5 satellites, 349 of which are likely functional and about 50 of which have already reached operational orbits. The mission also included the 2000th operational Starlink satellite launched by SpaceX since November 2019, likely raising the number of working Starlink satellites in orbit to just shy of 1900 (of 2016 total).
Starlink 4-7 was SpaceX’s sixth launch of 2022 less than five weeks into the year and the third successful Falcon 9 launch in 67 hours – a feat of launch cadence that only one other rocket family in history (Russia’s R-7 family) has achieved. SpaceX may have as many as 46 more Falcon launches planned this year.
Tesla has started to deploy the 2026 Summer Update to owners across its fleet, and among the biggest changes are improvements to Navigation, a new startup animation for the Model 3 and Model Y, Caraoke scoring, and new capabilities for Grok.
As the update has started making its way to some cars, we can now see a few of the features operating in real-time. We will show you what some of the new features look like in this article, along with some additional details on what changed.
Not all of the new features in the 2026 Summer Update have quite made an appearance, but some of them have, so we’ll show those here:
New Animation Screen for 3/Y
Tesla is rolling out a new startup animation for Tesla Model 3 and Model Y owners. This is present in Launch Edition and Performance Model 3 and Model Y, but other trim levels do not have anything like this.
The new animation screen on Model 3/Y with the 2026 Summer Update
Apparently color will also be customizable: pic.twitter.com/wSdwggtG3S
— TESLARATI (@Teslarati) July 27, 2026
Owners can adjust the color associated with the startup animation to suit their preferences. It is a surprise that more automakers do not focus on this animation for their vehicles; it can be a great first impression piece and make the car immediately feel more luxurious.
Tesla has included this on more premium trims, but it is nice to see it on the Model 3 and Model Y.
Grok Improvements
Grok can now adjust more things in the car outside of the Navigation system. Now, drivers can adjust anything from climate to driving settings by simply speaking to the AI assistant in the car:
@Tesla‘s AI assistant (Grok) with its new vehicle commands in action.
Set the climate, your destination and vehicle settings all in one go! pic.twitter.com/0bBTqaAk6G
— Not a Tesla App (@NotATeslaApp) July 28, 2026
You don’t even have to push a button, either. Instead, you can just say “Hey, Grok,” if you have it enabled. That feature rolled out with the 2026 Spring Update just a few months back.
This is a great feature, especially pertinent for the Robotaxi platform, as there will be no buttons inside the Cybercab when it eventually starts giving rides to the public. It also broadens Grok’s capabilities, which were relatively limited in terms of vehicle setting adjustments beforehand.
Tesla briefly offered one Robotaxi part in its Parts Catalog for your personal car, only to remove it just a short time after it was first noticed.
Tesla’s Robotaxi camera washer apparatus was briefly available for purchase on the company’s Online Parts Catalog. The camera washer was first noticed on Model Y Robotaxi vehicles about six months ago in Austin.
🚨 Tesla looks to have installed Camera Washers on the side repeater cameras on Robotaxis in Austin
pic.twitter.com/xemRtDtlRR— TESLARATI (@Teslarati) January 23, 2026
First noticed by Not a Tesla App, the Camera Washer entries appeared for the new “Juniper” Model Y under a category called “Halo,” which has also now disappeared. Interestingly, Halo probably is related to Tesla’s internal “Project Halo,” which was a project that aimed to retrofit customer-owned Model Ys into functional Robotaxis.
This hardware addition would likely be required for the vehicle to operate as a Robotaxi, as the Camera Washer seems to be a non-negotiable part of the vision-based system Tesla utilizes for self-driving efforts.
However, this part has since been removed and is no longer visible on the EPC.
Now the true question lingers: Why would Tesla add this Camera Washer to the Model Y parts catalog? Is it planning to make it available for owners to utilize on their own cars for personal use, or will it become a prerequisite for Robotaxi operation in customer-owned cars?
While discussing the upgrade options for Hardware 3 vehicles during the Q1 Earnings Call, Tesla CEO Elon Musk had said that the company could establish small, satellite shops that would upgrade cameras and self-driving computers. Perhaps this same strategy could be utilized for vehicles that want to be included in Robotaxi but do not have the correct hardware.
AI4 is currently represented as capable of unsupervised self-driving, and the same was said about HW3 at one point, only for Tesla to admit last quarter that it would, unfortunately, not be possible. Perhaps AI4 vehicles might need this camera washer as a prerequisite, just as HW3 cars will need that camera and computer upgrade.
This could be the first hint of that’s where we are headed.
Tesla has started rolling out a broader change to the ride experience for its Robotaxi fleet by silencing turn signals, but the change is certainly polarizing.
Tesla has generally made it clear that its purpose-built ride-hailing platform, Robotaxi, will cater to the rider in nearly every way possible. This includes having climate preferences, music, and other personal settings loaded up in the car as the rider enters.
But Tesla is taking it a step further by muting turn signal chimes altogether, a change that appears to be a way to make the ride more peaceful:
Tesla has finally turned off the blinker/turn signal noises in their Model Y Robotaxis.
This is a small update, but will definitely be noticeable for riders. It didn’t really make much sense to leave the turn signal sound on when it’s Unsupervised. pic.twitter.com/ITwx60PAMO
— Sawyer Merritt (@SawyerMerritt) July 27, 2026
However, there are a handful of people who are not thrilled about this change. Turn signals are a conditioned part of the human mind for those who ride in a car regularly.
Taking a turn without one feels strange and odd, and not hearing it click while activated could set off some alarms for riders, who might use the noise as confirmation that other drivers know of their intention to turn.
I kind of like it being on, threw me off when riding with Zoox who has had it disabled
— Dan Burkland (@DBurkland) July 27, 2026
Turn signal noises are still audible in customer cars, so if you use FSD in your personal vehicle, you will still hear the turn signal.
The move is certainly one that is unique, but not one that separates it from other ride-sharing services. In a normal car, the clicking sound confirms to the driver that the blinker is active. In a fully driverless Robotaxi, that feedback serves no purpose for passengers, other than peace of mind.
Tesla Summer Update begins rolling out: a look at the new features
Tesla briefly offered this Robotaxi part for your personal car
