News
Lordstown Endurance units head to customers for initial deliveries
Update 10:35 AM ET: Lordstown’s expected production rate for 2022 and 2023 with quotes from Q3 Earnings Call added.
Lordstown Motors announced today that the first production units of the Endurance all-electric pickup are leaving its Ohio factory and headed to customers. The Endurance officially achieved full homologation earlier this week and was fully certified by the Environmental Protection Agency (EPA) and the California Air Resource Board (CARB).
The first of 500 Endurance units are leaving the Foxconn EV Ohio plant for initial customer deliveries, Lordstown said in a press release. Production is expected to ramp slowly and will accelerate as the company works toward solving supply chain constraints.
“I am very proud of the Lordstown Motors and Foxconn EV Ohio team for their hard work, grit, and tenacity in achieving this milestone,” company CEO and President Edward Hightower said. “We are very excited to start delivering vehicles to our commercial fleet customers. The EnduranceTM will provide benefits to customers that use their vehicles for work. It optimizes key attributes of traction and maneuverability – with our in-wheel hub motors, safety – with our five-star crash performance, and value in the segment.”
Lordstown launched commercial production of the Endurance in late September. The company stated it had built only two vehicles just days after manufacturing had started. The company plans to build 30 units by the end of 2022, with the remaining 470 initial Endurance trucks finished in the first half of 2023. Lordstown detailed this in its Q3 2022 Earnings Call:
“Approximately 30 commercial units of the first batch are estimated to be built by the end of 2022, with the remainder built in the first half of 2023.”
After initial commercial production began, Lordstown still did not have the essential EPA green light that was needed to begin customer deliveries. The EPA and CARB both needed to certify the Endurance’s emissions and range through testing. Certifications were recently received and were followed by FMVSS crash and non-crash testing, which the vehicle also passed.
In just one short year, Lordstown has gone from being on the verge of financial ruin to having customer-ready units of its first vehicle roll off production lines. Last year, Lordstown was bailed out by Foxconn, the iPhone manufacturer, when the company bought the automaker’s Ohio production facility in a joint partnership. Production began after financial stability and corporate restructuring occurred at Lordstown. Edward Hightower took over as CEO after Steve Burns was ousted from the position.
Lordstown and Foxconn recently made their partnership all but permanent as the iPhone manufacturer pumped an additional $170 million in additional equity investments earlier this month. $100 million of the additional investments will be used to fund Lordstown’s “development and design activities for a new electric vehicle program in collaboration with Foxconn.” The remaining $70 million will be used to fund general corporate activities.
Some of Foxconn’s funding is pending Lordstown’s ability to achieve EV program milestones. You can read a complete breakdown here.
Technically, Lordstown and Foxconn’s joint venture was terminated, and all project developments are now expected to fall under Lordstown Motor Company.
Disclosure: Joey Klender is not a Lordstown or Foxconn investor.
I’d love to hear from you! If you have any comments, concerns, or questions, please email me at joey@teslarati.com. You can also reach me on Twitter @KlenderJoey, or if you have news tips, you can email us at tips@teslarati.com.
Elon Musk
The Starship V3 static fire everyone was waiting for just happened
SpaceX fired all 33 Raptor 3 engines on Starship V3 today clearing the path for Flight 12.
SpaceX is that much closer to launching their next-gen Starship after completing today’s full duration static fire of all 33 Raptor 3 engines out of Starbase, Texas. This marks the most powerful rocket engine test ever conducted and a direct signal that Flight 12, the maiden voyage of Starship V3, is imminent. SpaceX confirmed the test on X, posting that the full duration firing was completed ahead of the vehicle’s next flight test.
The road to today started on March 16, when Booster 19 completed a shorter 10-engine static fire, also at the newly constructed Pad 2. That test ended early due to a ground systems issue but confirmed all installed Raptor 3 engines started cleanly. Booster 19 returned to the Mega Bay, received its remaining 23 engines for a full complement of 33, and rolled back out this week for the complete test campaign. Musk confirmed earlier this month that Flight 12 is now 4 to 6 weeks away.
Countdown: America is going back to the Moon and SpaceX holds the key to what comes after
The numbers behind today’s test are genuinely hard to put in context. Each Raptor 3 engine produces roughly 280 tons of thrust, and with all 33 firing simultaneously, this generates approximately 9,240 tons of combined thrust, more than any rocket in history. For context, that’s enough thrust to lift the entire Empire State Building, and then some. V3 stands 408 feet tall and can carry over 100 tons to low Earth orbit in a fully reusable configuration. The V2 generation topped out at around 35 tons.
Historically, a successful full-duration static fire is the last major ground milestone before launch. SpaceX has followed this pattern with every Starship iteration since the program began in 2023. Musk has been direct about the ambition behind all of it. “I am highly confident that the V3 design will achieve full reusability,” he wrote on X earlier this year. Full reusability of both stages is the foundation of SpaceX’s plan to make regular flights to the Moon and Mars economically viable. Today’s test brings that goal one significant step closer.
Starship V3 delivers on two most critical promises of full reusability and in-orbit refueling. The reusability case is straightforward, and one we have seen with Falcon 9 wherein the rocket can fly again within a day rather than building a new one for every mission. It’s the only economic model that makes frequent lunar cargo runs viable. The in-orbit refueling piece is less obvious but equally essential. To reach the Moon with enough payload, Starship requires roughly ten dedicated tanker flights to fuel up a propellant depot in low Earth orbit before it can even begin its journey to the lunar surface. That capability has never been demonstrated at scale, and Flight 12 is the first step toward proving it works. As Teslarati reported, NASA’s Artemis II crew completed a historic lunar flyby earlier this month, the first humans to travel beyond low Earth orbit since 1972, but getting astronauts to actually land and eventually supply a permanent Moon base requires a cargo pipeline that only a fully reusable, refuelable Starship V3 can deliver at the volume and cost NASA’s plans demand.
News
Tesla Full Self-Driving shows stunning maneuver in Europe to silence skeptics
In a striking demonstration of autonomous driving prowess, Tesla’s Full Self-Driving (FSD) system recently showcased its capabilities on the narrow rural roads of the Netherlands. Captured in two in-car videos, the system encountered scenarios that would challenge even the most experienced human drivers.
Tesla Full Self-Driving, fresh on the heels of its approval for operation on European roads for the first time, showed off a stunning maneuver that will certainly silence any skeptics on the continent.
Fresh off its approval in the Netherlands, Full Self-Driving is working toward a significant expansion into more parts of Europe.
In a striking demonstration of autonomous driving prowess, Tesla’s Full Self-Driving (FSD) system recently showcased its capabilities on the narrow rural roads of the Netherlands. Captured in two in-car videos, the system encountered scenarios that would challenge even the most experienced human drivers.
In the first clip, a wide tractor occupied more than half the lane on a tight two-way road. Rather than braking abruptly or forcing a collision risk, FSD smoothly edged the vehicle onto the adjacent bike path—using the extra space with precision—before seamlessly returning to the lane once clear.
The second clip was equally demanding: while overtaking a group of cyclists, an oncoming car approached at speed.
FSD maintained a safe, minimal buffer to the cyclists while timing the pass perfectly, avoiding any swerve or hesitation that could unsettle passengers or other road users.
People wonder if FSD is safe on narrow European roads. Well have a look what it did when a tractor took up more than half of the road or when overtaking bicycles with fast oncoming traffic. pic.twitter.com/z37Csa09sP
— Chanan Bos (@ChananBos) April 14, 2026
This maneuver highlights FSD’s advanced spatial reasoning and predictive planning. On roads often under three meters wide, with no room for error, the system calculated available clearance in real time, incorporated shoulder and path geometry, and executed a controlled deviation without compromising safety.
It treated the bike path as a legitimate extension of navigable space, something many drivers might hesitate to do, while respecting Dutch road norms and cyclist priority.
Such feats align closely with a growing library of impressive FSD maneuvers documented on camera worldwide.
In urban Amsterdam, for instance, FSD has navigated the world’s densest cyclist environments, weaving through hundreds of unpredictable bike movements on canal-side streets with tram tracks and pedestrians.
One uncut drive showed it yielding smoothly at crossings, overtaking where needed, and even handling a near-perfect auto-park in a tight residential spot, demonstrating the same low-speed precision seen in the rural clips.
Teslas using FSD have tackled turbo roundabouts in the Netherlands, complex multi-lane circles notorious for geometry challenges, merging confidently while yielding to traffic. Similar clips depict smooth handling of construction zones, emergency vehicle pull-overs, and gated parking barriers, where the car stops precisely, waits for clearance, and proceeds without driver input.
Collectively, these examples illustrate FSD’s evolution toward handling the unpredictable.
The rural Netherlands maneuvers aren’t isolated. Instead, they reflect a pattern of spatial awareness, cyclist deference, and traffic anticipation seen from city streets to highways.
As FSD continues refining through real-world data, videos like this one are certainly building a compelling case for its readiness on Europe’s varied roads.
News
Tesla utilizes its ‘Rave Cave’ for new awesome safety feature
Part of the massive interior overhaul of both the Model 3 “Highland” and Model Y “Juniper” was the addition of interior accent lighting to help bring out the mood of the vehicle, increase the customization of the interior, and to create a unique listening experience.
Tesla is utilizing its ‘Rave Cave’ for an awesome new safety feature that will arrive with the upcoming Spring Update for 2026.
Part of the massive interior overhaul of both the Model 3 “Highland” and Model Y “Juniper” was the addition of interior accent lighting to help bring out the mood of the vehicle, increase the customization of the interior, and to create a unique listening experience.
Tesla added a Sync Lights feature that will strobe the accent strips with the beat of the music.
It is one of the most unique and one of the coolest non-functional features of a Tesla, as it does not improve the driving of the vehicle, but makes it a cool and personal addition to the interior.
However, Tesla is going to take it one step further, as the Rave Cave lights will now be used for blind spot recognition. This feature will be added as the Spring 2026 Update starts to roll out.
A lot of CRAZY new features coming with Tesla’s 2026 Spring Update, including a new FSD app!
– Self-Driving App (AI4 hardware): New app in App Launcher > Self-Driving for one-tap FSD subscriptions, activation guides, and ongoing stats.
– “Hey Grok”: Voice-activated Grok with… https://t.co/ljeYPlq9Qt— TESLARATI (@Teslarati) April 13, 2026
Tesla writes:
“Accent lights now turn red when an object is in your blind spot and your turn signal is engaged, or when an approaching object is detected while parked.”
This neat new safety feature will now increase the likelihood of a driver, who is operating their Tesla manually, of seeing the blind spot warnings that are currently available on the A pillar and on the center touchscreen.
These new alerts will now warn drivers of cross traffic as they back out of a parking space with little to no visibility of what is coming. It is a great new addition that will only increase the safety of the vehicles, while also utilizing something that is already installed in these specific Model 3 and Model Y units.
The Model 3 and Model Y were the central focus of the Spring 2026 Update, especially considering the fact that the Model S and Model X are basically gone, with only a few hundred units left. Additionally, Tesla included new Immersive Sound and Car Visualization for the Model 3 and Model Y specifically in this new update.
