Connect with us

News

Falcon 9 takes another flight with 22 Starlink satellites

Falcon 9 launching a Starlink mission from SLC-4E in California (Credit SpaceX)

Published

on

Launching last night at 12:03 am PT (08:03 UTC) from Space Launch Complex 4 East at Vandenberg Space Base in California, a Falcon 9 delivered another batch of 22 Starlink satellites into orbit.

This mission marked the 91st orbital launch of the year for the company. 22 Starlink satellites were inserted into a 53-degree orbital inclination and separated from the 2nd stage just over an hour after lift-off.

The midnight launch of the Starlink Group 7-8 mission (Credit SpaceX)

Now here is where I would normally place the lift-off clip from X, but during last night’s launch, the stream did not work during the launch and only picked up the mission some 20 seconds into flight with bad buffering and, as of now, is still having issues on X to replay the mission.

So here is a quick recap, the rocket launched on time, passed through maximum dynamic pressure (Max Q), and completed stage separation, at which point the Falcon 9 first stage began its journey back, and the 2nd stage continued into orbit.

As for the first stage, it was Booster 1071 that delivered the Starlinks into orbit. It completed its 13th trip after previously launching 6 Starlink missions, 2 top secret spy satellites, 2 Transporter missions, 1 science mission for CNES, NASA, and CSA, and the SARah-1 mission.

B1071 made another successful landing on the droneship “Of Course I Still Love You” eight and a half minutes after launch. The booster had a 27-day turnaround since its last mission, a bit quicker than average thanks to that mission landing at landing zone 4 instead of a droneship. The launch site had a turnaround time of just ~6.5 and half days, making it one of the fastest, if not the fastest time between launches for SpaceX from Vandenberg. Shortening that time a bit further will enable them to increase their launch cadence next year.

Next up is the Falcon Heavy OTV-7 (X-37B spaceplane) mission, which SpaceX has yet to confirm, but Space Systems Command public affairs in a press release showed a launch time at 8:14 pm ET (01:14 UTC) with a 10-minute launch window on December 10th.

Questions or comments? Shoot me an email at rangle@teslarati.com, or Tweet me @RDAnglePhoto.

Advertisement

Launch journalist, specializing in launch photography. Based on the Space Coast, a short drive from Cape Canaveral and the SpaceX launch pads.

News

Tesla lands regulatory green light for Robotaxi testing in new state

This will be the third state in total where Tesla is operating Robotaxi, following Austin and California.

Published

on

Credit: Tesla

Tesla has landed a regulatory green light to test its Robotaxi platform in a new state, less than three months after the ride-hailing service launched in Texas.

Tesla first launched its driverless Robotaxi suite in Austin, Texas, back on June 22. Initially offering rides to a small group of people, Tesla kept things limited, but this was not to be the mentality for very long.

It continued to expand the rider population, the service area, and the vehicle fleet in Austin.

The company also launched rides in the Bay Area, but it does use a person in the driver’s seat to maintain safety. In Austin, the “Safety Monitor” is present in the passenger’s seat during local rides, and in the driver’s seat for routes that involve highway driving.

Tesla is currently testing the Robotaxi platform in other states. We reported that it was testing in Tempe, Arizona, as validation vehicles are traveling around the city in preparation for Robotaxi.

Advertisement

Tesla looks to make a big splash with Robotaxi in a new market

Tesla is also hoping to launch in Florida and New York, as job postings have shown the company’s intention to operate there.

However, it appears it will launch in Nevada before those states, as the company submitted its application to obtain a Testing Registry certification on September 3. It was processed by the state’s Department of Motor Vehicles Office of Business Licensing on September 10.

It will then need to self-certify for operations, essentially meaning they will need to comply with various state requirements.

This will be the third state in total where Tesla is operating Robotaxi, following Austin and California.

CEO Elon Musk has stated that he believes Robotaxi will be available to at least half of the U.S. population by the end of the year. Geographically, Tesla will need to make incredible strides over the final four months of the year to achieve this.

Advertisement
Continue Reading

News

Tesla is improving this critical feature in older vehicles

Published

on

Credit: Tesla

Tesla is set to improve a critical feature that has not been present in older vehicles with a new update.

Tesla vehicles feature a comprehensive suite of driver assistance features, some of which aid in driving itself, while others support the vehicle’s surroundings.

One of those features is that of Driver Visualization, and with the rollout of a new update, owners of Intel-based Tesla vehicles are receiving an upgrade that will come with a simple software update.

Tesla plans to use Unreal Engine for driver visualization with crazy upgrade

The update will provide new visualizations while Intel-based vehicles are in reverse, a feature that was not previously available, but will be with Software Update 2025.32.2.

Advertisement

The improvement was spotted by Not a Tesla App via TheBeatYT_evil:

Advertisement

Previously, vehicles Tesla built were equipped with Intel-based processors, but newer cars feature the AMD chip, which is capable of rendering these visualizations as they happen. They were capable of visualizations when driving forward, but not in reverse, which is what this change resolves.

It is a good sign for those with Intel-based vehicles, as Tesla seems to be paying attention to what those cars are not capable of and improving them.

This was an undocumented improvement associated with this particular update, so you will not find any mention of it in the release notes that Tesla distributes with each update.

Continue Reading

News

Tesla looks to make a big splash with Robotaxi in a new market

Tesla has been transparent that it is prioritizing safety, but it believes it can expand to basically any geographical location within the United States and find success with its Robotaxi suite. CEO Elon Musk said it could be available to half of the U.S. population by the end of the year.

Published

on

Credit: Joe Tegtmeyer | X

Tesla is looking to make a big splash with Robotaxi in a new market, as the company was spotted testing validation vehicles in one region where it has not yet launched its ride-hailing service.

After launching Robotaxi in Austin in late June, Tesla followed up with a relatively quick expansion to the Bay Area of California. Both service areas are operating with a geofence that is expansive: In Texas, it is 173 square miles, while in the Bay Area, it is roughly 400 square miles.

Tesla has been transparent that it is prioritizing safety, but it believes it can expand to basically any geographical location within the United States and find success with its Robotaxi suite. CEO Elon Musk said it could be available to half of the U.S. population by the end of the year.

There have been plenty of reports out there that have speculated as to where Tesla would land next to test Robotaxi, and Nevada, Florida, Arizona, and New York have all been in the realm of possibility. These regions will need to approve Tesla for regulatory purposes before Robotaxi can officially operate.

Tesla is still testing and performing validation in several regions, and in Tempe, Arizona, things are moving forward as a Model Y with a LiDAR rig was spotted performing ground truth for the platform:

Advertisement

With the LiDAR unit, many followers of the self-driving and autonomy space might wonder why Tesla uses these apparatuses during validation, especially considering the company’s stance and vision-based approach.

LiDAR is used for “ground truth,” which is basically a solidification or confirmation of what the cameras on the car are seeing. It is a great way to essentially confirm the accuracy of the vision-based suite, and will not be used on Robotaxi units used within the ride-hailing suite.

The Robotaxi platform was made available to the public earlier this month, as Tesla launched its app for iOS users.

Advertisement

Tesla Robotaxi app download rate demolishes Uber, Waymo all-time highs

Downloading the app allows you to join a waitlist, giving you the opportunity to utilize and test the Robotaxi platform in either Austin or the Bay Area.

Continue Reading

Trending