The Boring Company just introduced a new piece of hardware, and it runs on parts pulled straight from a Tesla showroom. Liner Truck 3, unveiled in a post from the tunneling company’s official X account, is an all electric vehicle built around Tesla Model 3 battery packs and drive units, purpose built to move concrete tunnel segments to the boring machine face without a single person underground.

Introducing Liner Truck 3 — our latest fully electric tunnel vehicle.

– Tesla Model 3 battery and drive units
– Transports 22,000+ lb of concrete segments to the boring machine
– 28 miles of range
– 12 mph max operating speed
– Remotely piloted from Global OCC in Texas, with… pic.twitter.com/XB7FgSXnpy

— The Boring Company (@boringcompany) August 7, 2026

The job itself is unglamorous but critical. Each precast segment run weighs more than 22,000 pounds, roughly the load of a full cement mixer, and Liner Truck 3 hauls that weight repeatedly between the surface staging area and wherever the Prufrock machine happens to be cutting.

The Boring Company said Liner Truck 3 is piloted remotely out of its Global Operations Control Center in Texas, extending the Zero-People-In-Tunnel approach the company has spent years building toward. An earlier version of a ZPIT liner truck was already tested at the company’s Bastrop, Texas research tunnels, and a factory tour released last month showed an employee flying a fully loaded liner truck with a PlayStation controller. Liner Truck 3 looks like the production version of that same idea, cleaned up and pushed into daily use.

The timing lines up with a company digging in more places than it ever has before. The Boring Company now has multiple Prufrock machines active or arriving in Nashville, where Music City Loop construction has been accelerating since February, and its Vegas Loop network keeps adding tunnel mileage on a near monthly basis. Every one of those projects depends on getting concrete segments to the cutting face fast enough to keep the boring machine from idling, which is exactly the bottleneck Liner Truck 3 is designed to remove.

Advertisement

-

-

It also reinforces something Tesla owners have watched happen gradually across Musk’s companies: passenger car hardware finding a second life in heavy equipment. Model 3 drive units already move people through the Vegas Loop, and now the same components are hauling concrete underground in Nashville and wherever The Boring Company digs next. Whether that kind of component reuse extends further into TBC’s equipment lineup, or into other Musk owned industrial hardware, is the next thing worth watching.

Tesla’s 2026 Summer Update, which just began rolling out to customer vehicles, now links the built-in web browser with the in-cabin camera feed and microphone input, thereby letting owners join video calls on nearly any browser-based service instead of just Zoom.

The change appears in Tesla’s own release notes for software version 2026.26 under “Web Browser,” which states that the vehicle can now use its interior camera and cabin microphone when a website requests access, with permission granted the same way a desktop browser handles it. As NotATeslaApp notes, this feature opens the door to Google Meet, Microsoft Teams, Discord, and other webcam-enabled sites to activate the in-car cabin-facing camera. The feed automatically crops and zooms to center the driver in frame.

Tesla has offered in-car video calling before, but only through a dedicated Zoom app that launched at the end of 2022, a stripped-down browser preloaded with Zoom’s own web client and gated behind Premium Connectivity. Opening the full browser to any camera-requesting site removes that walled garden. Elon Musk first called video conferencing “definitely a future feature” back in 2020, when the pandemic pushed remote meetings into daily life, so this update effectively finishes something Tesla has been promising for six years.

Tesla Summer Update begins rolling out: a look at the new features

The feature keeps the same restrictions that applied to Zoom on Tesla vehicles. It only works while the car is parked; shifting into Drive disables the camera feed, according to the release notes. It is also limited to vehicles running Tesla’s AMD Ryzen infotainment hardware, meaning older Intel-based Model S and Model X units, along with early Model 3 and Model Y builds, don’t get it.

Turning the browser into a general entry point for the in-cabin camera, rather than routing everything through one local app, widens the number of third-party sites that can ask for access, even though Tesla’s permission prompt.

With the Summer update only days into its rollout, be sure to stay with us on TikTok and X to see the latest video demonstrations.

Advertisement

-

-

Tesla Model 3 owner David Moss has spent the better part of eight months turning his vehicle into a rolling stress test for Full Self-Driving, and this week he pushed his single, continuous FSD streak past 20,000 miles without a human intervening.

Moss, a Tacoma, Washington resident who sells LiDAR scanning equipment for a living, first drew wide attention in December 2025 when he logged 10,000 consecutive miles on FSD v14.2. Days later he drove from the Tesla Diner in Los Angeles to Myrtle Beach, South Carolina, covering 2,732 miles in two days and 20 hours with zero disengagements, the first verified coast to coast autonomous drive in Tesla’s history. Tesla even featured the trip as an official customer story in March. That original streak eventually reached 12,961 miles across 30 states before ending in rural Wisconsin in January, when snow and single digit temperatures forced Moss to take over.

Tesla FSD successfully completes full coast-to-coast drive with zero interventions

He started over, and this run has gone further. In late May, Moss drove 3,760 miles across Canada with two companions, from Horseshoe Bay in Vancouver to a Tesla showroom in Halifax, again without a single intervention, a trip Tesla AI software VP Ashok Elluswamy publicly congratulated him for on X. In June, he pushed the same unbroken streak south, aiming to link the Canadian border to the Mexican border, and crossed 10,000 miles on Tesla’s newly added in car streak counter along the way, the first driver to do so since Tesla began showing confetti animations for the feature.

20,000 Mile Tesla FSD Screen Streak!

Special thank you to @DevinOlsenn, @scotsrule08, & @OwenSparks for helping co drive during all these fun adventures these last couple of months

Also thank you to @wholemars for always tracking me along the journey verifying it all with his… pic.twitter.com/CZ2yO6Ev0X

— David Moss (@DavidMoss) July 27, 2026

Advertisement

-

-

It’s worth noting that every mile is logged through the FSD Database, a community run tracker built by Tesla influencer Omar Qazi, well known as @WholeMars on X, that pulls telemetry straight from the car and records disengagements down to a tenth of a mile. That verification is what separates Moss’s numbers from casual claims on social media.

The streak itself is a fairly recent addition to Tesla’s software. FSD v14.2 introduced a Self Driving Stats panel tracking the ratio of autonomous to manual miles, and v14.3.4 added the live streak counter in June, which resets the moment a driver brakes, wrenches the wheel or cancels navigation. Reaching 20,000 miles on that counter means a single Tesla drove itself through countless highways, city grids, construction zones and Supercharger stalls without a single reset.

Moss has said the goal was never to set a record for its own sake, but to show, mile by verified mile, what the software can already do.