Connect with us

News

Robocar becomes first autonomous race car to complete Goodwood hill climb

Published

on

The 2018 Goodwood Festival of Speed is off with a bang, with high-profile car manufacturers and cutting-edge vehicles gracing the event. As could be seen in a recently uploaded video online, this year’s Festival of Speed also featured Robocar — an all-electric, fully-autonomous, AI-powered vehicle — successfully completing the event’s traditional hill climb course.

Roborace, the company behind the self-driving racecar, uploaded Robocar’s hill climb run on its official YouTube channel. The vehicle’s run was just a test session during the early morning before the festival officially started, but it did prove that the self-driving car was capable of traversing Goodwood’s 1.16-mile hill climb course independently. This was a milestone for Robocar’s development, considering that the Goodwood hill course presented several challenges to the vehicle’s systems.

Robocar is built from the ground up as an autonomous racecar. Thus, when attempting its run up Goodwood’s hill course, the car had to rely exclusively on data gathered by its array of sensors such as its GPS, radar, LiDAR, ultrasonic sensors, and machine vision cameras. Due to the terrain of the hill climb track, however, Robocar’s GPS was compromised, since the course’s narrow roads and trees block the car’s GPS signals, preventing the vehicle to map its position accurately. In order to address this challenge, Roborace developed a specialized code for Robocar just for the event, utilizing the car’s LiDAR sensors for real-time environment perception.

Robocar during its hill climb attempt at the 2018 Goodwood Festival of Speed. [Credit: Roborace/YouTube]

As could be seen in the company’s recently-uploaded video, it appears that the specialized code it developed for the self-driving racecar was enough to navigate the vehicle to the finish line without any problems.

Roborace hopes to eventually start a racing series with Robocar, with teams being issued identical cars and the competition being determined by how each vehicle is coded. Robocar, after all, is not just robust sensor-wise, it also packs some serious power, with the self-driving car being equipped with four 135 kW electric motors that produce 500 hp, as well as a 58 kWh battery. Within the heart of Robocar are NVIDIA Drive PX 2 processors, as well as an AI system provided by Arrival.

Advertisement

Robocar’s appearance at the Goodwood Festival of Speed was supported by the founder of the event himself, Charles Gordon-Lennox, better known as the Duke of Richmond. According to the Duke, he believes that the participation of a self-driving car such as Robocar in this year’s event is a statement for the future of mobility.

Robocar featured in Roborace’s booth at the 2018 Goodwood Festival of Speed. [Credit: Dean Scott]

“I can’t think of a more exciting way to celebrate our Silver Jubilee than to have Roborace attempt the first autonomous race car run up the hill. Roborace plays an important role in the future of mobility, challenging public perceptions and providing a platform to advance new technologies. This makes them the perfect partner to undertake this significant feat,” he said.

The 2018 Goodwood Festival of Speed starts on July 12 and ends on July 15. Several of the world’s biggest auto manufacturers, including Tesla, are participating in the event. As we noted in a previous report, Tesla’s booth at Goodwood, which features the Model 3 as its centerpiece, is proving to be quite popular with the event’s attendees.

Advertisement

Check out pictures of Tesla’s booth and the Model 3 at the event here.

Watch Robocar’s hill climb run in the video below.

Advertisement

Simon is an experienced automotive reporter with a passion for electric cars and clean energy. Fascinated by the world envisioned by Elon Musk, he hopes to make it to Mars (at least as a tourist) someday. For stories or tips--or even to just say a simple hello--send a message to his email, simon@teslarati.com or his handle on X, @ResidentSponge.

Advertisement
Comments

News

Tesla Full Self-Driving shows stunning maneuver in Europe to silence skeptics

In a striking demonstration of autonomous driving prowess, Tesla’s Full Self-Driving (FSD) system recently showcased its capabilities on the narrow rural roads of the Netherlands. Captured in two in-car videos, the system encountered scenarios that would challenge even the most experienced human drivers.

Published

on

Credit: Tesla

Tesla Full Self-Driving, fresh on the heels of its approval for operation on European roads for the first time, showed off a stunning maneuver that will certainly silence any skeptics on the continent.

Fresh off its approval in the Netherlands, Full Self-Driving is working toward a significant expansion into more parts of Europe.

In a striking demonstration of autonomous driving prowess, Tesla’s Full Self-Driving (FSD) system recently showcased its capabilities on the narrow rural roads of the Netherlands. Captured in two in-car videos, the system encountered scenarios that would challenge even the most experienced human drivers.

In the first clip, a wide tractor occupied more than half the lane on a tight two-way road. Rather than braking abruptly or forcing a collision risk, FSD smoothly edged the vehicle onto the adjacent bike path—using the extra space with precision—before seamlessly returning to the lane once clear.

Advertisement

The second clip was equally demanding: while overtaking a group of cyclists, an oncoming car approached at speed.

FSD maintained a safe, minimal buffer to the cyclists while timing the pass perfectly, avoiding any swerve or hesitation that could unsettle passengers or other road users.

Advertisement

This maneuver highlights FSD’s advanced spatial reasoning and predictive planning. On roads often under three meters wide, with no room for error, the system calculated available clearance in real time, incorporated shoulder and path geometry, and executed a controlled deviation without compromising safety.

It treated the bike path as a legitimate extension of navigable space, something many drivers might hesitate to do, while respecting Dutch road norms and cyclist priority.

Such feats align closely with a growing library of impressive FSD maneuvers documented on camera worldwide.

In urban Amsterdam, for instance, FSD has navigated the world’s densest cyclist environments, weaving through hundreds of unpredictable bike movements on canal-side streets with tram tracks and pedestrians.

Advertisement

One uncut drive showed it yielding smoothly at crossings, overtaking where needed, and even handling a near-perfect auto-park in a tight residential spot, demonstrating the same low-speed precision seen in the rural clips.

Teslas using FSD have tackled turbo roundabouts in the Netherlands, complex multi-lane circles notorious for geometry challenges, merging confidently while yielding to traffic. Similar clips depict smooth handling of construction zones, emergency vehicle pull-overs, and gated parking barriers, where the car stops precisely, waits for clearance, and proceeds without driver input.

Collectively, these examples illustrate FSD’s evolution toward handling the unpredictable.

The rural Netherlands maneuvers aren’t isolated. Instead, they reflect a pattern of spatial awareness, cyclist deference, and traffic anticipation seen from city streets to highways.

Advertisement

As FSD continues refining through real-world data, videos like this one are certainly building a compelling case for its readiness on Europe’s varied roads.

Continue Reading

News

Tesla utilizes its ‘Rave Cave’ for new awesome safety feature

Part of the massive interior overhaul of both the Model 3 “Highland” and Model Y “Juniper” was the addition of interior accent lighting to help bring out the mood of the vehicle, increase the customization of the interior, and to create a unique listening experience.

Published

on

Credit: Tesla | X

Tesla is utilizing its ‘Rave Cave’ for an awesome new safety feature that will arrive with the upcoming Spring Update for 2026.

Part of the massive interior overhaul of both the Model 3 “Highland” and Model Y “Juniper” was the addition of interior accent lighting to help bring out the mood of the vehicle, increase the customization of the interior, and to create a unique listening experience.

Tesla added a Sync Lights feature that will strobe the accent strips with the beat of the music.

It is one of the most unique and one of the coolest non-functional features of a Tesla, as it does not improve the driving of the vehicle, but makes it a cool and personal addition to the interior.

Advertisement

However, Tesla is going to take it one step further, as the Rave Cave lights will now be used for blind spot recognition. This feature will be added as the Spring 2026 Update starts to roll out.

Advertisement

Tesla writes:

“Accent lights now turn red when an object is in your blind spot and your turn signal is engaged, or when an approaching object is detected while parked.”

This neat new safety feature will now increase the likelihood of a driver, who is operating their Tesla manually, of seeing the blind spot warnings that are currently available on the A pillar and on the center touchscreen.

These new alerts will now warn drivers of cross traffic as they back out of a parking space with little to no visibility of what is coming. It is a great new addition that will only increase the safety of the vehicles, while also utilizing something that is already installed in these specific Model 3 and Model Y units.

Advertisement

The Model 3 and Model Y were the central focus of the Spring 2026 Update, especially considering the fact that the Model S and Model X are basically gone, with only a few hundred units left. Additionally, Tesla included new Immersive Sound and Car Visualization for the Model 3 and Model Y specifically in this new update.

Continue Reading

News

Tesla parked 50+ Cybercabs outside its Texas Factory with some crash tested

Dozens of Tesla Cybercabs have been spotted at Giga Texas crash testing facility ahead of launch.

Published

on

By

Tesla Cybercab fleet spotted at Gigafactory Texas [Credit: Joe Tegtmeyer)
Tesla Cybercab fleet spotted at Gigafactory Texas on April 13, 2026 [Credit: Joe Tegtmeyer)

Drone footage captured by longtime Giga Texas observer Joe Tegtmeyer shows over 50 units of Tesla Cybercab at the Austin factory campus, including several units clustered by Tesla’s on-site crash testing facility.

The outbound lot at Gigafactory Texas sits just outside the factory exit and serves as the primary staging area where finished vehicles are held before being loaded onto transport carriers or dispatched for validation testing. On any given day, the lot holds a mix of Model Y and Cybertruck units alongside the growing Tesla Cybercab fleet, as can be seen in the drone footage captured by Joe Tegtmeyer.

Tesla Cybercab fleet spotted at Gigafactory Texas [Credit: Joe Tegtmeyer)

Tesla Cybercab fleet spotted at Gigafactory Texas on April 13, 2026 [Credit: Joe Tegtmeyer)

Roughly 50 Cybercab units are visible across the campus, parked in tight organized rows. Most of the units visible still carry steering wheels and pedals, temporary additions Tesla included to satisfy current safety regulations while the vehicles accumulate real-world data ahead of full regulatory approval for a steering wheel-free design.

Tesla Cybercab fleet spotted at Gigafactory Texas [Credit: Joe Tegtmeyer)

Tesla Cybercab fleet spotted at Gigafactory Texas [Credit: Joe Tegtmeyer)

Tesla operates dedicated Crash Labs at both its Giga Texas and Fremont facilities that are purpose-built for controlled structural crash tests. Historically, automakers begin intensive crash testing roughly one to two months before volume production kicks off. The Cybertruck followed almost exactly that pattern. The Cybercab appears to be on the same track facility that we first saw back in October 2025.

Tesla Cybercab crash test units spotted at Gigafactory Texas [Credit: Joe Tegtmeyer)

Tesla Cybercab crash test units spotted at Gigafactory Texas [Credit: Joe Tegtmeyer)

The first production Cybercab rolled off the Giga Texas line on February 17, 2026. Volume production is now targeted for April. Musk previously wrote on X that “the early production rate will be agonizingly slow, but eventually end up being insanely fast,” and separately stated Tesla is targeting at least 2 million Cybercab units per year. Commercial robotaxi service in Austin is targeted for late 2026.

 

Advertisement
Continue Reading