Connect with us

News

SpaceX CEO Elon Musk reveals photos of Starship’s first completed Raptor engine

CEO Elon Musk revealed the first official photos of SpaceX's finalized Raptor engine, set to support Starship hop tests and early BFR launches. (SpaceX)

Published

on

Shortly after Teslarati reported that the first operationalized Raptor had shipped to McGregor, Texas for its first full-scale static fire tests, SpaceX CEO Elon Musk took to Twitter to post the first official photos of the “radically redesigned” engine preparing for its critical debut test fire in Texas.

Designed with extreme reliability, efficiency, and reusability in mind, the Raptor seen in Musk’s photos is rated for just shy of 2.5 times the thrust of Merlin 1D at 200 tons (450,000 lbf) and has been commonized across both stages of BFR (Starship and Super Heavy) to spread out development costs and speed up the next-generation rocket’s orbital launch debut.

Aside from revealing some impressive photos of the first upgraded Raptor preparing for a static fire test, Musk went into a bit more detail on the future of the engine and its probable development path, describing Raptor in its current iteration as a sort of compromise between achieving nominal performance and minimizing the cost and timescale to arrive at a flight-ready engine. Currently stationed at SpaceX’s McGregor, Texas development and testing facilities, Raptor appears to feature an expansion ratio somewhere in between Merlin 1D (optimized for sea-level) and MVac (optimized for vacuum).

Advertisement

This increases the stress on the nozzle during ignition and operation at normal atmospheric pressures but it also improves engine efficiency once Starship (or Super Heavy) rises above the thickest parts of Earth’s atmosphere, even if a medium-expansion nozzle still can’t touch the performance of a giant vacuum-optimized bell like those used by MVac. As such, BFR in its earliest iterations will be significantly less capable than a fully-optimized version of the rocket when it comes to high-energy Earth/lunar orbits and interplanetary trajectories, a challenge that can at least initially be hurdled by accepting much lower nominal payload capabilities and relying on brute-force performance, much like Falcon 9 and Heavy.

A gif of Raptor throttling over the course of a 90+ second static-fire test in McGregor, Texas. (SpaceX)

Assuming the first hot-fire tests of the full-scale, operationalized Raptors go well, three of the next-gen engines could support the first hop tests of a full-scale Starship prototype sometime in the next few months, potentially as early as late-February or March. Musk also reiterated that Starship’s complimentary booster – known as Super Heavy and set to begin initial prototype assembly as early as April – will feature 31 Raptor engines capable of producing upwards of 12.4 million pounds of thrust (62,000 kN) at liftoff. However, Musk indicated that the sheer value of 31 advanced Raptor engines also means that the first Super Heavy flights may only feature a partial complement of engines in case the vast booster experiences a failure, far from uncommon during the first few launches of a new rocket.


Check out Teslarati’s newsletters for prompt updates, on-the-ground perspectives, and unique glimpses of SpaceX’s rocket launch and recovery processes!

Advertisement

Eric Ralph is Teslarati's senior spaceflight reporter and has been covering the industry in some capacity for almost half a decade, largely spurred in 2016 by a trip to Mexico to watch Elon Musk reveal SpaceX's plans for Mars in person. Aside from spreading interest and excitement about spaceflight far and wide, his primary goal is to cover humanity's ongoing efforts to expand beyond Earth to the Moon, Mars, and elsewhere.

Advertisement
Comments

News

Tesla is preparing to take on autonomy’s final boss

India’s city streets are notorious for their complexity and congestion.

Published

on

Credit: Whole Mars Catalog/YouTube

If there is any sign that Tesla is now confident about its self-driving program, it would be this. As could be seen on Tesla’s Careers page, the company is now hiring Autopilot Vehicle Operators in Delhi and Mumbai, India. 

As far as real-world traffic is concerned, one could argue that India’s city streets are the final boss of autonomous driving systems due to their complexity and congestion.

Tesla job openings

As per Tesla in its recent job openings, Prototype Vehicle Operators will be responsible for driving an engineering vehicle for extended periods and conducting dynamic audio and camera data collection for testing and training purposes. In both its job listings for Mumbai and Delhi, Tesla noted that successful applicants will be gathering real-world data on the weekends and around the clock. 

Considering the job openings in India, Tesla seems to be intent on rolling out its advanced driver-assist systems like FSD in the country. This is quite interesting, as Tesla is not hiring Prototype Vehicle Operators in other territories that recently launched, such as the Philippines. Perhaps Tesla intends to tackle FSD’s final boss of sorts before rolling out FSD in other territories.

FSD’s rollout

Tesla’s autonomous driving program uses the company’s Full Self-Driving system, which is currently available on vehicles in North America and China. Tesla, however, has a more advanced version of FSD called Unsupervised FSD, which is currently being used in vehicles that are part of the Robotaxi pilot in Austin and the Bay Area.

Advertisement

Elon Musk has also recently announced on X that Tesla will be releasing FSD V14 in the coming weeks. He also shared a number of improvements that can be expected from FSD V14. “The FSD release in about 6 weeks will be a dramatic gain with a 10X higher parameter count and many other improvements. It’s going through training & testing now. Once we confirm real-world safety of FSD 14, which we think will be amazing, the car will nag you much less,” Musk wrote in his post. 

Continue Reading

News

Tesla Sweden finally makes IF Metall union give up 600-day strike

Tesla and the union have opened the door to resolutions that do not involve a collective agreement.

Published

on

Tesla-sweden-expansion-if-metall-strike
(Credit: NicklasNilsso14)

After nearly two years of industrial action and sympathy strikes, Swedish labor union IF Metall has stated that it is softening its stance in its dispute with Tesla. With this, Tesla and the union have opened the door to resolutions that do not involve a collective agreement. 

Union chair Marie Nilsson told Sveriges Radio’s Ekot that while the preferred outcome remains a signed agreement, “other alternative solutions” are now on the table.

Union reconsiders rigid demands

The strike, which began over 600 days ago, has been marked by a series of strategic moves from both sides. IF Metall blocked Tesla’s access to license plates by targeting mail delivery, while Tesla bypassed the restrictions by importing vehicles in bulk through German ferries to Trelleborg, among other strategies. 

Despite the high-profile tactics, the number of active strikers has been relatively small, just about 60 in total, as noted in a CarUp report. Tesla Sweden has also maintained that it does not intend to bow down to the union’s demands. Over the 600-day strike, Tesla Sweden has adapted its operations to get around the union and its allies’ strikes.

Possible paths to ultimate resolution

Nilsson, for her part, noted that IF Metall is now willing to explore alternatives, such as embedding industry-standard terms directly into Tesla’s employment contracts or shifting Tesla’s Swedish operations to a company that already has a collective agreement.

Advertisement

“You can do it in different ways. The easiest thing would be to sign a collective agreement. But when that is not possible, we have to find other alternative solutions as well, so we are open to discussion,” Nilsson stated.

IF Metall, if any, has acknowledged that Tesla has already improved working conditions in Sweden since the dispute began. Tesla Sweden has argued that its working conditions are already better than union standards, which is reportedly one of the reasons why very few company employees actually participated in IF Metall’s strike.

“There have been conversations throughout the journey where we compared our conditions. Tesla has adjusted details without going into details, they want to be a good employer, it’s about wages and conditions,” Nilsson stated.

Continue Reading

Cybertruck

Tesla Cybertruck is getting a big security upgrade

“Cybertruck was not 100% carryover in execution like S3XY, so it required work.”

Published

on

Credit: Tesla

Tesla confirmed today that a massive Cybertruck security feature is on the way soon, and it is one that owners have been asking about for a long time.

Like all Teslas, Cybertruck has the excellent security feature known as “Sentry Mode.” The feature essentially turns your Tesla into a moving security camera, recording any event that happens nearby.

It has been used to solve crimes such as vandalism and burglary, and even used by police departments to solve other, high-profile crimes.

Tesla quietly added this extra Sentry Mode feature to deter vandals

However, Cybertruck has been missing one key feature of Sentry Mode: the use of the B-Pillar camera has not been enabled, leaving one of the most vandalized and targeted vehicles in the United States with a weakness.

One person who has been vocal about it is Tesla Cybertruck enthusiast Greggertruck, who has been pushing for answers for months. He finally got his answer from Cybertruck Vehicle Program Manager Siddhant Awasthi:

“It will come soon! Cybertruck was not 100% carryover in execution like SX3Y so it required work. Team has finished work on this and just need to make sure it’s validated and runs reliably (which it should for its feature).”

It sounds as if Tesla’s issue was something they similarly experienced when deploying Full Self-Driving to Cybertruck. The other four Tesla vehicles were able to use FSD because they’re all relatively similar in ride height and overall functionality. They share tons of similarities.

Cybertruck did not get FSD right away because Tesla still had to work on the differences between it and the other cars in the lineup. As Awasthi said, “Cybertruck was not 100% carryover in execution like S3XY, so it required work.”

Tesla Cybertruck FSD release expected for Sept, Park Assist to come first

It sounds as if Tesla is close to resolving some of the more intricate details of adding the functionality, and it was just a matter of time before it figured out the issue.

The release of the B-Pillar camera being active during Sentry Mode events on Cybertruck will likely come in a software update in the coming weeks.

Continue Reading

Trending